ISO 16000-3:2022
Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air — Active sampling method
| Fecha edición: |
2022-09-22
En Vigor
|
|---|---|
| Idiomas disponibles: | Francés, Inglés |
| Resumen: | This document specifies a determination of formaldehyde (HCHO) and other carbonyl compounds (aldehydes and ketones) in air. The method is specific to formaldehyde but, with modification, at least 12 other aromatic as well as saturated and unsaturated aliphatic carbonyl compounds can be detected and quantified. It is suitable for determination of formaldehyde and other carbonyl compounds in the approximate concentration range 1 µg/m3 to 1 mg/m3. The sampling method gives a time-weighted average (TWA) sample. It can be used for long-term (1 h to 24 h) or short-term (5 min to 60 min) sampling of air for formaldehyde. This document specifies a sampling and analysis procedure for formaldehyde and other carbonyl compounds that involves collection from air on to adsorbent cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis of the hydrazones formed by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption[12],[16]. The method is not suitable for longer chained or unsaturated carbonyl compounds. Le présent document spécifie un dosage du formaldéhyde (HCHO) et d’autres composés carbonylés (aldéhydes et cétones) dans l’air. La méthode est spécifique au formaldéhyde. Toutefois, si elle est modifiée, au moins 12 autres composés carbonylés aromatiques et aliphatiques saturés et insaturés peuvent être détectés et quantifiés. Elle convient au dosage du formaldéhyde et d'autres composés carbonylés dans la plage de concentration comprise entre environ 1 µg/m3 et 1 mg/m3. La méthode d’échantillonnage fournit un résultat moyen pondéré dans le temps (TWA). Elle peut être utilisée pour l’échantillonnage du formaldéhyde dans l’air à long terme (1 h à 24 h) ou à court terme (5 min à 60 min). Le présent document spécifie un mode opératoire d'échantillonnage et d'analyse pour le formaldéhyde et d'autres composés carbonylés qui implique un prélèvement de l'air dans des cartouches adsorbantes imprégnées de 2,4-dinitrophénylhydrazine (DNPH) et une analyse ultérieure des hydrazones formées par chromatographie en phase liquide à haute performance (CLHP) avec détection par absorption ultraviolette.[12],[16] La méthode n'est pas adaptée pour les composés carbonylés à plus longues chaînes ou insaturés. |
| ICS: | 13.040.20 - Aire ambiente |
| CTN: | ISO/TC 146/SC 6 - 52822 |
|
Anulaciones Normas |
Anula a ISO 16000-3:2011 Es anulada por ISO/DIS 16000-3 |










