Buscador de normas

Estado: Revised / 2023-11-10

Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set / 85 to 95 Type A Hardness For Seals in Fuel Systems and Specific Engine Oil Systems

Estado: Revised / 2023-11-10

Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged

Estado: Revised / 2023-11-10

Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock Aircraft Quality 0.95Cr - 0.22V (0.48 - 0.53C) (6150)

Estado: Revised / 2023-11-06

Communication for Plug-in Vehicles as a Distributed Energy Source

Estado: Revised / 2023-11-03

Agricultural Forestry Off-Road Machinery Control and Communication Network

Estado: Revised / 2023-11-01

Measurement of Light Vehicle Stationary Exhaust System Sound Level Engine Speed Sweep Method

Estado: Revised / 2023-11-01

Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document

Estado: Stabilized / 2023-11-01

Road Vehicles - Symbols for Controls, Indicators, and Tell-Tales

Estado: Stabilized / 2023-11-01

Power Line Carrier Communications for Commercial Vehicles

Estado: Revised / 2023-10-31

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

Estado: Revised / 2023-10-31

Planetary Gears - Terminology

Estado: Canceled / 2023-09-28

Electromagnetic Compatibility (EMC) System Design Checklist

Estado: Revised / 2023-09-28

Rotorcraft Engine Foreign Object Debris and Damage

Estado: Revised / 2023-09-28

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated

Estado: Revised / 2023-09-28

Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Rings, Forgings, and Heading 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) 1800 °F (982 °C) Solution Heat-Treated, Precipitation-Hardenable

Estado: Revised / 2023-09-28

Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La (188)

Estado: Revised / 2023-09-28

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted and Remelted (Rene 41)

Estado: Revised / 2023-09-28

Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (625)

Estado: Revised / 2023-09-28

Storage Batteries

Estado: Revised / 2023-09-22

Steel Bars, Forgings, and Mechanical Tubing Aircraft-Quality 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)

Estado: Revised / 2023-09-22

Steel Bars, Forgings, Mechanical Tubing, Rings and Stock for Forgings and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Premium Aircraft Quality Consumable Electrode Vacuum Remelted

Estado: Revised / 2023-09-22

V2X Communications Message Set Dictionary

Estado: Revised / 2023-09-22

V2X Communications Message Set Dictionary™ ASN file

Estado: Revised / 2023-09-22

V2X Communications Message Set Dictionary™ Set

Estado: Revised / 2023-09-21

Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed

Estado: Revised / 2023-09-21

Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed

Estado: Revised / 2023-09-21

BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF-ALIGNING, EXTRA LIGHT DUTY

Estado: Stabilized / 2023-09-18

Filters, Conventional, Electromagnetic Interference Reduction General Specification For

Estado: Stabilized / 2023-09-18

Electromagnetic Interference Measurement Impulse Generators: Standard Calibration Requirements and Techniques

Estado: Revised / 2023-09-18

CLAMP, LOOP, TUBE 17-7PH, CUSHION, SELF-LOCKING

Estado: Stabilized / 2023-09-18

Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior Using Video-Based Techniques

Estado: Canceled / 2023-09-15

Aircraft Ground Deicing/Anti-Icing Communication Phraseology for Flightcrew and Groundcrew

Estado: Stabilized / 2023-09-11

Guide for Choosing a Minimum Wall Thickness of Tubing for Use with Weld Fittings Coded for a Range of Wall Sizes

Estado: Stabilized / 2023-09-11

Fluid Connections, Fittings, Hex Width

Estado: Stabilized / 2023-09-11

Weights, Tube Fitting, Estimating, Weighing and Maintaining, Procedure for

Estado: Stabilized / 2023-09-11

Marking; Standard Hose, Aircraft

Estado: Stabilized / 2023-09-11

CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT 28 VOLT DC, OPERATING POWER

Estado: Revised / 2023-09-07

Guide to Temperature Monitoring in Aircraft Gas Turbine Engines

Estado: Revised / 2023-09-07

Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed

Estado: Revised / 2023-09-07

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings or Rings 15Cr - 6.5Ni - 0.75Mo - 0.30Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable

Estado: Revised / 2023-09-07

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Stock for Forging and Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted 1650 °F (899 °C) Solution and Precipitation Heat Treated

Estado: Revised / 2023-09-07

Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si - 0.06C Solution and Precipitation Heat Treated

Estado: Revised / 2023-09-07

Guideline for Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts; Avoidance, Detection, Mitigation, and Disposition Systems

Estado: Revised / 2023-09-06

Mobile Air Conditioning System Refrigerant Emissions Estimate for Mobile Air Conditioning Refrigerants

Estado: Revised / 2023-09-06

Pedestrian Dummy Full-Scale Test Results and Resource Materials

Estado: Revised / 2023-09-06

Communication Between Plug-in Vehicles and Off-Board DC Chargers

Estado: Revised / 2023-09-05

Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels

Estado: Revised / 2023-09-05

Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged

Estado: Revised / 2023-09-05

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged

Estado: Revised / 2023-09-05

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings, Rings, or Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted, 1800 °F (982 °C) Solution Heat Treated Precipitation Hardenable