Buscador de normas

Unplasticized polyvinyl chloride (PVC-U) drainpipes - Part 1: Dimensions, requirements, testing

Testing of lubricants and related products - Determination of the temperature stability of turbine oils

Fasteners - Part 27: Steel screws, bolts and studs made of steel with pre-adhesive coating - Technical specifications

Food hygiene - Commercial dishwashing machines - Additional hygiene requirements and testing

Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of trace impurities in powders, granules and lumps of graphite by optical emission spectroscopy by inductively coupled plasma (ICP-OES) and by electrothermal vaporization (ETV) under the action of a halogenated reaction gas (modifier)

Interpreting services - Community interpreting - Requirements and recommendations

Calculation of load capacity of shafts and axles; Supplement 1: Examples to part 1 to 3

Plastics - Determination of illumination diffusion - Near-distance haze measurement for transparent materials

Corrosion of metals and alloys - Electrochemical test methods - Test method for the determination of surface resistivity of zinc and zinc coatings using gel electrolytes

Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5, Connecting dimensions

Food hygiene - Hygiene training

Compressed air equipment for rail vehicles - Safety valves with normal and solid stroke for compressed air systems

Waste management - Mobile IT Systems - Requirements for the XML interface Office-Mobile / Note: CD-ROM

Sterilization - Steam sterilizers for laboratory use - Apparatus requirements, requirements on services and installation / Note: DIN 58951-2 (2018-01) remains valid alongside this standard until 2025-06-30.

Assessment of water, soils and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples

Calculation of load capacity of shafts and axles - Part 3: Strength of materials

Cold rooms - Constructional safety requirements / Note: DIN 8986 (2012-10) remains valid alongside this standard until 2024-12-31.

Railway vehicles - Driver cabs - Part 1: General requirements

Railway vehicles - Driver cabs - Part 3: Additional requirements for urban and suburban rolling stock

Construction products: Assessment of release of dangerous substances - Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) - Gas chromatographic method with mass spectrometric detection; German version EN 17844:2023

Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 1: Pipes, fittings and their joints made from PCV-U, PP and PE

Entertainment technology - LED wall systems and accessories, interfaces and safety requirements

Spectral measurement of radiation - Part 1: Terminology, quantities, characteristic values

Coatings on plastics and composites - Part 8: Film thickness

Testing of metallic materials - Compression test of metallic cellular materials

Road vehicles - Air filters for passenger compartments - Part 4: Isopropanol conditioning of automotive cabin air filters

Unplasticized polyvinyl chloride (PVC-U) drainpipes - Part 2: Guidance for the assessment of conformity

Low-voltage stud-terminals - Part 2: Part list

Construction products: Assessment of release of dangerous substances - Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS); German version EN 17845:2023

Assessment of water, soils and gases for their aggressiveness to concrete - Part 1: Principles and limiting values

Parallel shank slot drills - Dimensions and technical delivery conditions

Low-voltage stud-terminals - Part 1: Compilation

Cylindrical shank end mills - Dimensions and technical delivery conditions

Fire fighting equipment - Cages for transport of delivery hoses - Part 1: Cages for transport of delivery hoses type B, C and D; Amendment A1 / Note: Date of issue 2024-06-07*Intended as an amendment to DIN 14827-1 (2018-12).

Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 2: Apparatus for decreasing of emission of corrosion products to drinking water / Note: Date of issue 2024-06-21*Intended as replacement for DIN 50934-2 (2000-04).

Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 9: Tool chests for metalworking and woodworking / Note: Date of issue 2024-06-07*Intended as replacement for DIN 14800-9 (2013-12).

Pipes and fittings for subsoil drainage of trafficked areas and underground engineering - Part 2: Guidance for the assessment of conformity for pipes, fittings and their joints made from PVC-U, PP and PE

Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatuses for corrosion protection - Part 1: General / Note: Date of issue 2024-06-21*Intended as replacement for DIN 50934-1 (2000-04).

Low-voltage stud-terminals - Part 1: Insulators

Household scissors - Dimensions, materials, shapes, requirements and tests / Note: Date of issue 2024-05-31*Intended as replacement for DIN 32608 (1976-08).

Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 4: Laboratory corrosion test for removal of corrosion products in incrusted water installations / Note: Date of issue 2024-06-21*Intended as replacement for DIN 50934-4 (2000-04).

German standard methods for the examination of water, waste water and sludge - Microbiological methods (group K) - Part 25: Protocol for the validation of alternative confirmation procedures and for verifications of validated alternative confirmation procedures (K 25) / Note: Date of issue 2024-06-21

Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 4: Tool chest for chimney / Note: Date of issue 2024-06-07*Intended as replacement for DIN 14800-4 (2013-12).

Fire-fighting equipment for fire-fighting and rescue service vehicles - Part 10: Sealing chest / Note: Date of issue 2024-06-07*Intended as replacement for DIN 14800-10 (2013-12).

Screening of substances of very high concern (SVHC) - General principles / Note: Date of issue 2024-06-21*Intended as replacement for DIN/TS 51012 (2020-04).

Hiking, trekking, walking and winter touring poles - Requirements and test methods / Note: DIN 79016 (2017-01) remains valid alongside this standard until 2024-12-31.

Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry

Mine plans - Drilling and cavern - Part 1: Drilling / Note: Date of issue 2024-05-31*Intended as replacement for DIN 21914-1 (2005-10).

Refrigerating systems and heat pumps - Terms and definitions - Part 3: Components, general / Note: Date of issue 2024-05-31

Laboratory glassware - Stopcocks, cone 1 : 10 - Conditions for interchangeability / Note: Date of issue 2024-06-14*Intended as replacement for DIN 12540-1 (1977-05).