IEC 62146-1:2013+AMD1:2016 CSV
Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General
| Fecha edición: |
2016-06-23
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Francés |
| Resumen: | IEC 62146-1:2013+A1:2016 is applicable to grading capacitors used on circuit-breakers. Their function is to control the voltage distribution across the individual interrupter units of a multi-break circuit-breaker. Grading capacitors can also be used in parallel to the interrupter unit on single break circuit-breakers to modify the Transient Recovery Voltage (TRV). The grading capacitor is a sub-component for the circuit-breaker and shall be specified in accordance with the circuit-breaker specifications. This standard applies to grading capacitors falling into one or both of the following categories for: - mounting on air-insulated circuit-breakers; - mounting on enclosed circuit-breakers (for example immersed in SF6, in oil, etc.). The testing for each of the above applications is in some cases different. The object of this standard is: - to define uniform rules regarding performances, testing and rating; - to define specific safety rules; - to provide a guidance for installation and operation. Keywords: grading capacitors, circuit-breakers This consolidated version consists of the first edition (2013) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication. L'IEC 62146-1:2013+A1:2016 s'applique aux condensateurs de répartition utilisés sur les disjoncteurs. Ces condensateurs ont pour fonction de contrôler la répartition de la tension entre chaque interrupteur d'un disjoncteur à coupure multiple. Les condensateurs de répartition peuvent également être utilisés parallèlement à l'interrupteur de disjoncteurs à coupure unique afin de modifier la tension transitoire de rétablissement (TRV - Transient Recovery Voltage). Le condensateur de répartition est un sous-composant du disjoncteur et il est spécifié conformément aux spécifications des disjoncteurs. La présente norme s'applique aux condensateurs de répartition à l'huile, à gaz et céramique relevant de l'une ou des deux catégories suivantes pour: - l'installation sur les disjoncteurs isolés dans l'air; - l'installation sur des disjoncteurs protégés (par exemple, immergés dans du gaz SF6, dans l'huile, etc.). L'essai applicable à chacune des applications susmentionnées est différent dans certains cas. La présente norme a pour objet de: - définir des règles uniformes concernant les performances, essais et caractéristiques assignées; - définir des règles de sécurité spécifiques; - fournir un guide d'installation et d'exploitation. Mots clés: Le condensateur de repartition, disjoncteurs Cette version consolidée comprend la première édition (2013) et son amendement 1 (2016). Il n'est donc pas nécessaire de commander l'amendement avec cette publication. |
| ICS: | 31.060.01 - Condensadores en general, 31.060.70 - Condensadores de potencia |
| CTN: | TC 33 - 1220 |
|
Modificaciones Normas |
Es modificada por IEC 62146-1:2013/AMD1:2016 |
|
Otras Relaciones |
Acuerdo de Frankfurt FprEN 62146-1:2013 |










