DIN EN 12201-2:2011-11
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes; German version EN 12201-2:2011
| Fecha edición: |
2013-12-01
Anulada
|
|---|---|
| Fecha cancelación: | 2013-12-01 |
| Idiomas disponibles: | Inglés, Alemán |
| Resumen: | DIN EN 12201-2 specifies the characteristics of pipes made from polyethylene (PE 100, PE 80, and PE 40) for buried and above ground applications, intended for the conveyance of water for human consumption, including raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with DIN EN 12201-1 and DIN EN 12201-3 to -5 it is applicable to PE pipes, their joints and to joints with components of PE and other materials intended to be used under the following conditions: a) allowable operating pressure, PFA, up to 25 bar; b) an operating temperature of 20 °C as a reference temperature; c) buried in the ground; d) sea outfalls; e) laid in water; f) above ground, including pipes suspended below bridges. DIN EN 12201 covers a range of allowable operating pressures and gives requirements concerning colours and additives |
| Keywords: | Additives|Buildings|Colour|Connections|Delivery pipes (firefighting)|Determinations|Diameter|Dimensions|Discharges|Drainage|Drinking water lines|Drinking water supply|Inking|Marking|Materials|Overhead|PE|Pipe couplings|Pipe fittings|Pipelines|Pipes|Piping system|Plastic pipelines|Plastic pipes|Plastics|Polyethylene|Potable water|Pressure|Pressure pipes|Properties|Service water|Sewage|Sewer pipes|Sewers|Specification (approval)|Test parameter|Tolerances (measurement)|Underground|Water|Water pipelines|Water pipes|Water practice|Water supply|Welded joints |
| ICS: | 23.040.05 - Canalizaciones y sus componentes para sistemas externos de aguas residuales, 23.040.20 - Canalizaciones de materiales plásticos, 93.030 - Sistemas exteriores de evacuación de aguas residuales |
| CTN: | |
|
Equivalencia Internacional |
Idéntica EN 12201-2:2011+A1:2013 |
|
Reemplazo Normas |
Reemplaza a DIN EN 12201-2:2003-06 Reemplaza a DIN EN 12201-2:2010-02 Reemplaza a DIN EN 13244-2:2003-04 Reemplaza a DIN EN 13244-2 Berichtigung 1:2003-08 Es reemplazada por DIN EN 12201-2:2013-12 |










