CEN/TS 16660:2015
Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity
| Fecha edición: |
2023-10-09
En Vigor
|
|---|---|
| Idiomas disponibles: | Francés, Inglés, Alemán |
| Resumen: | La présente Spécification technique décrit trois essais en laboratoire permettant de déterminer les propriétés réductrices et la capacité de réduction des produits de construction, des déchets et de l'éluat résultant de l'exposition de ces solides à un lixiviant. Les espèces réductrices libérées par le produit sont dosées par titrage afin de quantifier la capacité de réduction.
Pour une spécification des matériaux pour lesquels une expérience a été acquise dans l'exécution des essais conformes à la présente Spécification technique, se reporter à l'Annexe A et à la référence [15].
NOTE Dans la pratique, les matériaux ayant des propriétés réductrices peuvent, dans des conditions oxydantes et anoxiques (isolées), présenter un comportement à la lixiviation différent de celui obtenu avec les essais de lixiviation spécifiés dans l'EN 16457. Cela peut sérieusement gêner l'interprétation des essais de lixiviation, si cette condition n'est pas prise en considération. Diese Technische Spezifikation legt drei Laborprüfungen zur Bestimmung der Reduktionseigenschaft und der Reduktionsfähigkeit von Bauprodukten, Abfallmaterialen und der Eluate, die durch Kontakt mit diesen Feststoffen entstehen, fest. Die von dem Produkt freigesetzten reduzierenden Spezies werden titriert, um die Reduktionsfähigkeit zu quantifizieren. Für die Präzisierung der Materialien, mit denen Erfahrungen bei der Durchführung der Prüfungen nach dieser Technischen Spezifikation gesammelt wurden, wird auf Anhang A und [16] hingewiesen. ANMERKUNG Materialien mit reduzierenden Eigenschaften können in der Praxis sowohl unter oxidierenden als auch unter sauerstofffreien Bedingungen (unter Ausschluss von Sauerstoff) ein vollständig unterschiedliches Elutionsverhalten zeigen, als es mit den Elutionsversuchen in EN 16457 erhalten wird. Das kann die Interpretation der Elutionsversuche ernsthaft behindern, wenn diese Bedingung nicht berücksichtigt wird. This Technical Specification specifies three laboratory tests to determine the reducing character and the reducing capacity of construction products, waste materials and the eluate resulting from exposure of these solids to a leachant. Reducing species released from the product are titrated to quantify the reducing capacity. For a specification of the materials with which experience has been acquired with the execution of the tests according to this Technical Specification see Annex A and [16]. NOTE Materials with reducing properties can in practice under both oxidising and anoxic (isolated) conditions show completely different leaching behaviour than obtained with the leaching tests specified in EN 16457. This may seriously hamper the interpretation of the leaching tests, if this condition is not taken into consideration. |
| ICS: | 13.030.01 - Residuos en general |
| CTN: | CEN/TC 444 - 2046877 |










