EN ISO 14855-2:2026
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test (ISO 14855-2:2026)
| Fecha edición: |
2026-09-16
En Vigor
|
|---|---|
| Idiomas disponibles: | Inglés, Francés |
| Resumen: | This document specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel.
The method applies to the following materials:
natural and/or synthetic polymers and copolymers, and mixtures of these;
plastic materials that contain additives such as plasticizers or colorants;
water-soluble polymers;
materials that, under the test conditions, do not inhibit the activity of microorganisms present in the inoculum.
NOTE If the test material inhibits microorganisms in the inoculum, another type of mature compost or pre-exposure compost can be used. Le présent document spécifie une méthode de détermination de la biodégradabilité aérobie ultime des matériaux plastiques, dans des conditions de compostage contrôlées, par mesurage gravimétrique de la quantité de dioxyde de carbone libéré. Cette méthode est conçue pour produire un taux de biodégradation optimal en ajustant l’humidité, l’aération et la température du récipient de compostage. La présente méthode s’applique aux matériaux suivants: polymères et copolymères naturels et/ou synthétiques, et mélanges des deux; matériaux plastiques contenant des additifs tels que plastifiants ou colorants; polymères solubles dans l’eau; matériaux qui, dans les conditions d’essai, n’inhibent pas l’activité des micro-organismes présents dans l’inoculum. NOTE Si le matériau d’essai inhibe les micro-organismes dans l’inoculum, il est possible d’utiliser un autre type de compost mature ou un compost de pré-exposition. Dieses Dokument legt ein Verfahren zur Bestimmung der vollständigen aeroben Bioabbaubarkeit von Kunststoff-Materialien unter den Bedingungen kontrollierter Kompostierung durch gravimetrische Messung der Menge des freigesetzten Kohlenstoffdioxids fest. Das Verfahren ist dafür ausgelegt, eine optimale Geschwindigkeit des Bioabbaus durch Anpassung von Feuchte, Begasung und Temperatur des Kompostiergefäßes zu erreichen. Das Verfahren ist auf folgende Substanzen anwendbar: natürliche und/oder synthetische Polymere und Copolymere sowie Gemische aus diesen; Kunststoffe, die Additive, wie z. B. Weichmacher oder Farbstoffe, enthalten; wasserlösliche Polymere; Substanzen, die unter Prüfbedingungen die Aktivität der im Inokulum vorhandenen Mikroorganismen nicht inhibieren. ANMERKUNG Wirkt die Prüfsubstanz inhibierend auf die Mikroorganismen im Inokulum, kann eine andere Art von ausgereiftem Kompost oder voradaptierter Kompost verwendet werden. |
| ICS: | 83.080.01 - Plásticos en general |
| CTN: | CEN/TC 249 - 6230 |
|
Otras Relaciones |
Acuerdo de Viena ISO 14855-2:2026 |
|
Reemplazo Normas |
Reemplaza a EN ISO 14855-2:2018 |










