-50% discount* If you buy the same UNE standard in different languages. * Discount on the lower pvp.

EN 507:2026

Roofing and cladding products from metal sheet - Specification for fully supported products of aluminium sheet

Edition date: 2026-09-30
In Force
Available languages: French, German, English
Summary: This document specifies requirements for roofing and cladding products used for assembly into coverings for wall claddings, linings and pitched roofs, made from aluminium sheet with or without additional surface treatment (organic coating or anodising). This document establishes the general characteristics, the definitions and the labelling of the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. This document specifies the requirements for products which enable them to meet all normal service conditions. Products can be prefabricated or semi-formed products as well as strip, coil and sheet for on-site-formed applications (e.g. standing seam roofs). This document is applicable to all discontinuously laid and fully supported roofing and cladding products made of aluminium sheets. This document does not specify requirements for supporting construction, design of roof system and execution of connections and flashings. This document does not apply to self-supporting aluminium sheets that are covered by EN 508 2.

Le présent document spécifie les exigences relatives aux produits de couverture et de bardage utilisés pour l'assemblage de couvertures, de bardages, de parements intérieurs et de toits en pente, fabriqués à partir de tôles d'aluminium, avec ou sans traitement de surface supplémentaire (revêtement organique ou anodisation). Le présent document donne les caractéristiques générales, les définitions et l'étiquetage applicables aux produits, de même que les exigences relatives aux matériaux à partir desquels les produits peuvent être fabriqués. Il est destiné à être utilisé soit par les producteurs, en vue de démontrer que leurs produits sont conformes aux exigences, soit par les acheteurs pour vérifier que les produits sont conformes avant leur expédition de l'usine. Le présent document spécifie les exigences relatives aux produits pour leur permettre de répondre à toutes les conditions normales en service. Les produits peuvent être des produits préfabriqués ou semi-formés, ainsi que des bandes, des bobines ou des tôles pour des applications de façonnage sur chantier (par exemple, les couvertures à joints debout). Le présent document s'applique à tous les produits de couverture et de bardage posés en discontinu et totalement supportés réalisés à partir de tôles en aluminium. Le présent document ne spécifie pas d’exigences concernant la construction des supports, la conception de la couverture ni l’exécution des assemblages et des solins. Le présent document ne traite pas des tôles d’aluminium autoportantes, qui sont couvertes par l’EN 508-2.

Dieses Dokument legt die Anforderungen an Dachdeckungs- und Wandbekleidungselemente fest, die für die Herstellung von Außen- und Innenwandbekleidungen sowie Eindeckungen von geneigten Dächern verwendet werden und aus Aluminiumblech mit oder ohne zusätzliche Oberflächenbehandlung (organische Beschichtungen oder Anodisierung) bestehen. Dieses Dokument legt die allgemeinen Merkmale, Definitionen und Beschriftung der Elemente fest, sowie die Anforderungen an die Werkstoffe, aus denen die Elemente hergestellt werden können. Es ist dafür bestimmt, von Herstellern verwendet zu werden, um sicherzustellen, dass ihre Produkte den Anforderungen entsprechen, oder von Käufern, um zu überprüfen, ob die Produkte in Einklang mit den Anforderungen stehen, bevor sie das Werk verlassen. Dieses Dokument legt die Anforderungen fest, unter denen die Elemente allen üblichen Einsatzbedingungen gerecht werden. Bei den Dachdeckungselementen kann es sich um vorgefertigte oder halbfertige Elemente sowie um Blechstreifen, Band und Blech für die Verarbeitung auf der Baustelle (z. B. Stehfalzdächer) handeln. Dieses Dokument ist anwendbar für alle überlappenden, vollflächig unterstützten Dachdeckungs- und Wandbekleidungselemente aus Aluminiumblech. In diesem Dokument werden keine Anforderungen an die Tragkonstruktion, die Konstruktion des Dachsystems sowie die Ausführung von Verbindungen und Zubehörteilen gestellt. Dieses Dokument ist nicht anwendbar für selbsttragende Aluminiumbleche, die in EN 508 2 behandelt werden.
ICS: 77.150.10-Aluminium products, 91.060.20-Roofs
CTN: CEN/TC 128 - 6110

Reemplazo Normas

Reemplaza a EN 507:2019

The book in the author's words

Ultricies magna feugiat malesuada sociosqu varius vivamus cubilia parturient, himenaeos vitae vehicula nam placerat netus urna platea, nostra rutrum felis mattis penatibus velit quisque.
Frequently Asked Questions Do you have any questions about our products?
  • Standards UNE, EN, ISO, IEC, BSI, DIN, ASTM, AFNOR, IEEE, SAE
  • In addition, you can request the rules of the rest of the organizations through the e-mail normas@aenor.com
  • Technical books on paper and in electronic format (PDF, epub).

The standards can be purchased in PDF, reading or paper. The reading standards are not download files, they can only be viewed in the client area. The standards ordered on paper and some of the books in the catalogue are printed on demand. 

Check deadlines in normas@aenor.com.

The license of use is for one user and one device, if you want to reproduce the content of the standard, you must request a license that will have an additional cost. Send us your inquiry here 

 

The use of standards and other content protected by intellectual property rights in AI systems is prohibited. If you are interested in such uses, please contact normas@aenor.com. Failure to comply will result in the withdrawal of your Access licence.

The AENOR standards and books that appear in the online store can only be purchased exclusively through the website. AENOR does not have a physical store.

Purchase procedure: by clicking on "Buy" the desired products will go to the shopping cart. If there are display problems, the recommended browser is Chrome.

To formalize the purchase you must access the customer area. If you are not registered as a customer, you must fill in a form with the data along with a password and username. This will create the account.

Once the "Customer data" form has been completed, "Order in progress" will be displayed with all the items loaded in the shopping cart, their prices, taxes established in current legislation and shipping costs if applicable.

The prices of the standards and books that appear in the various sections do not include taxes or shipping costs.

AENOR promotional codes consist of alphanumeric characters and can only be applied to online purchases, received through a specific offer and for a limited time. To apply your promotional code, you just have to enter it in step 2 of 4 of the purchase process on the website and click on "apply", after you have identified yourself and chosen the payment methods. Promo codes are not cumulative.

 

  • Credit or debit card (Visa, Mastercard) and PayPal.
  • Bank transfer. If you opt for this form of payment, you must first send AENOR a copy of the transfer by email to normas@aenor.com
  • The purchase invoice can be downloaded from the customer area, in my previous orders

In the case of clients of companies based abroad, the taxpayer identification number of the corresponding country (for example, in Argentina the CUIT), must be filled in the CIF/NIF - VAT field .

  • Direct download via the website in the Customer Area. In the customer area, which can only be accessed with a password and username, the products purchased will be available for a period of fifteen days from the date of purchase, as long as the payment has been accepted. Files in digital format are protected and in no case editable. Before purchasing them, it is important that the license of use is read and accepted as a prior step to purchase.
  • Shipping by courier. Products purchased on physical media are shipped by courier. The maximum delivery time in Spanish territory, from the acceptance of the order by AENOR, is:
  •  Approximately seven working days for all standards purchased through the store in paper format.
  • Approximately three days for books purchased through the store. Stocks of paper books are limited and their offer on the website does not imply availability within the indicated period. In the event that the requested book is not available, the customer is notified of the delay in receiving the order, which will be approximately seven working days. 

For the rest of the products that are not on the website, check availability and delivery time at normas@aenor.com.

1. For digital products (PDF, Epub), once delivery has been made by direct download via the website in the Customer Area, you will not have the right to exercise your right of withdrawal.

2. For personalised products on paper, once the purchase has been made, you will not have the right to exercise your right of withdrawal.

3.  For all other paper products, you have the right to withdraw from the sale within 14 calendar days from the date of purchase. Remember that for the return it is essential that the product is in perfect condition, sealed by the packaging and preserving its original packaging. The customer will be responsible for pickup and shipping costs.

The order invoice includes shipping costs, so there is no amount to pay to the courier. Shipping costs are calculated based on both the final destination of the order and the number of products ordered. They include transport and packaging costs. Shipping costs are subject to periodic revisions. Outlet books will have free shipping costs only if the shipment is made in the Peninsula.

Destination Up to three standards and/or publications From three standards and/or publications
Peninsula 7,31€ 8,60€
Balearic Islands 18,04€ 23,34€
Canary Islands, Ceuta and Melilla  18,04€ 23,34€
Europe 59,17€ 80,07€
United States and Canada 70,07€ 96,94€
Rest of the world 91,94€ 115,91€
  • Purchases made by residents of the Member States of the European Union will be subject to the payment of VAT (value added tax).
  • ​​
  • In the case of legal persons and natural persons who, acting as entrepreneurs, are domiciled in a Member State of the European Union (except residents in Spain) and have an intra-community NIF/VAT registered in the VIES census, they will be exempt from paying VAT, being an essential condition the sending of this document by email to normas@aenor.com.
  • Purchases made in a private capacity (natural person), regardless of where they have their residence, will be subject to the payment of VAT.
  • Purchases made by entities in non-EU countries will be exempt from paying VAT, as long as they send the corresponding tax residence document by email to normas@aenor.com.
  • The sale operations will be understood to have been carried out at AENOR's registered office: Génova 6, 28004, Madrid – Spain. 

The contract for the purchase of products through this Website shall be governed by Spanish law. Any dispute arising out of or in connection with the use of the Website or such contract shall be subject to the exclusive jurisdiction of the Courts and Tribunals of Madrid.

Notwithstanding the foregoing, if you are entering into this contract as a consumer under the terms of Royal Decree 1/2007, nothing in this clause shall affect the rights that may be granted to you as such under applicable law.