EN 15721:2026
Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
| Fecha edición: |
2026-07-15
En Vigor
|
|---|---|
| Idiomas disponibles: | Francés, Alemán, Inglés |
| Resumen: | This document specifies a gas chromatographic method for ethanol, in which higher alcohols (propan-1-ol, butan-1-ol, butan-2-ol, 2-methylpropan-1-ol (iso-butanol), 2-methylbutan-1-ol, and 3-methylbutan-1-ol) from (0,1 up to 2,5) mass percentage, methanol from (0,1 up to 3) mass percentage and other impurities, in the range from (0,1 up to 2) mass percentage are determined.
NOTE 1 The European ethanol blending component specification [1] sets a limit for the combined result of ethanol + higher alcohols, not the ethanol content itself.
The method is developed for non-denatured ethanol samples. With sufficient attention to correct separation of the higher alcohols and other components, determination of hydrocarbons in ethanol that contains denaturants as per EN 15376 [1] is possible.
NOTE 2 For the purposes of this document, the term “% (m/m)” is used to represent the mass percentage or mass fraction (ω). Le présent document spécifie une méthode de chromatographie en phase gazeuse applicable à l'éthanol, pour la détermination de la teneur en alcools supérieurs (propan-1-ol, butan-1-ol, butan-2-ol, 2-méthyl propan-1-ol (isobutanol), 2-méthyl butan-1-ol, et 3-méthyl butan-1-ol) de 0,1 à 2,5 % en pourcentage massique, de la teneur en méthanol de 0,1 % à 3 % en pourcentage massique et de la teneur en autres impuretés de 0,1 % à 2 % en pourcentage massique. NOTE 1 La norme de spécification européenne de l’éthanol comme base de mélange [1] fixe une exigence sur la teneur combinée éthanol + alcools supérieurs et non sur la teneur en éthanol uniquement. La méthode a été développée pour les échantillons d'éthanol non-dénaturé. En accordant une attention suffisante à la séparation correcte des alcools supérieurs et des autres composants, il est possible de déterminer les hydrocarbures dans l'éthanol contenant des dénaturants selon l'EN 15376 [1]. NOTE 2 Pour les besoins du présent document, l’expression « % (m/m) » est utilisée pour désigner le pourcentage massique ou la fraction massique (ω). Dieses Dokument legt ein gaschromatographisches Verfahren für Ethanol fest, mit dem höhere Alkohole [Propan-1-ol, Butan-1-ol, Butan-2-ol, 2-Methylpropan-1-ol (Isobutanol), 2-Methylbutan-1-ol und 3-Methylbutan-1-o] von (0,1 bis 2,5) % Massenanteil, Methanol von (0,1 bis 3) % Massenanteil und andere Verunreinigungen im Konzentrationsbereich von (0,1 bis 2) % Massenanteil bestimmt werden. ANMERKUNG 1 In der Europäischen Spezifikation [1] für Ethanol zur Verwendung als Blendkomponente ist ein Grenzwert für das kombinierte Ergebnis von Ethanol + höheren Alkoholen festgelegt, nicht für den Ethanolgehalt selbst. Das Verfahren wurde für Proben von unvergälltem Ethanol entwickelt. Unter ausreichender Beachtung der korrekten Trennung der höheren Alkohole und anderer Bestandteile ist die Bestimmung von Kohlenwasserstoffen in Ethanol, das Vergällungsmittel nach EN 15376 [1] enthält, möglich. ANMERKUNG 2 Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils in Prozent oder des Massenanteils (ω) einer Substanz der Ausdruck „% (m/m)“ verwendet. |
| ICS: | 75.160.20 - Combustibles líquidos |
| CTN: | CEN/TC 19 - 6003 |
|
Reemplazo Normas |
Reemplaza a EN 15721:2013 |










