EN 1020:2009
Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
| Fecha de anulación: |
2019-10-16
Anulada
|
|---|---|
| Resumen: | This European Standard specifies the requirements and test methods for the safety and efficiency of non-domestic gas-fired air heaters having a fan to assist the transportation of combustion air and/or flue gases, hereafter referred to as "appliances". This includes appliances having forced draught burners.
This European Standard applies to Type B12, B13, B14, B22, B23, B42, B43, B44, B52, B53, C12, C13, C32, C33, C62 and C63 appliances with a heat input not exceeding 300 kW (based on net calorific value) intended for use in other than single unit residential dwellings. It also applies to appliances intended for outdoor installation. Provision of the heated air may be by means of ducting or may be directly into the heated space.
For Type C62 and C63 appliances, this European Standard only applies when such appliances are intended for final installation in a similar manner to Type C3 appliances.
This standard does not apply to:
a) appliances intended for use in a single unit residential dwelling;
b) appliances of the condensing type;
c) appliances with atmospheric burners without a fan to assist the transportation of combustion air and/or flue gases;
d) dual purpose air conditioning appliances (heating and cooling);
e) appliances where the air is heated by an intermediate fluid;
f) appliances fitted with manual or automatic flue dampers;
g) portable or transportable forced convection appliances;
h) appliances having multiple heating units with a single draught diverter;
i) appliances fitted with more than one flue outlet;
j) appliances that are designed for continuous condensation within the flue system under normal operating conditions;
k) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic.
This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to ... Diese Europäische Norm spezifiziert die Anforderungen an und Prüfverfahren für die Sicherheit und Leistungsfähigkeit gasbefeuerter Warmlufterzeuger für den nicht häuslichen Gebrauch mit einem Gebläse zur Beförderung der Verbrennungsluft und/oder des Rauchgases (nachfolgend kurz „Geräte“ genannt). Dies umfasst auch Geräte mit Gebläsebrennern. Diese Europäische Norm gilt für Geräte der Bauarten B12, B13, B14, B22, B23, B42, B43, B44, B52, B53, C12, C13, C32, C33, C62 und C63, deren Wärmebelastung 300 kW (bezogen auf den Heizwert) nicht übersteigt, und die hauptsächlich für den Gebrauch in anderen als nur aus einer Einheit bestehenden Wohnungen bestimmt sind. Sie gilt auch für Geräte, die im Freien aufgestellt werden. Die Abgabe der Warmluft kann durch Leitungen oder direkt in den zu beheizenden Raum erfolgen. Für Geräte der Bauarten C62 und C63 gilt diese Europäische Norm nur, wenn solche Geräte letztlich für die Installation in gleicher Art wie die Geräte der Bauart C3 vorgesehen sind. Diese Norm gilt nicht für: a) Geräte, die für die Verwendung in einer einzelnen Wohnung vorgesehen sind; b) Geräte mit Brennwertnutzung; c) Geräte mit atmosphärischen Brennern ohne Gebläse zur Beförderung der Verbrennungsluft und/oder des Rauchgases; d) Doppelzweck-Klimaanlagen (zum Heizen und Kühlen); e) Geräte, bei denen die Luft mittels einer Zwischenflüssigkeit erwärmt wird; f) Geräte mit einer handbetätigten oder automatischen Einrichtung zur Einstellung der Verbrennungsluftzufuhr oder der Abgasabführung (einschließlich Abgasdrosselklappen); g) tragbare oder transportable Geräte mit erzwungener Konvektion; h) Geräte mit mehreren Heizelementen mit nur einer Strömungssicherung; i) Geräte mit mehr als einem Abgasstutzen; j) Geräte, die innerhalb der Abgasleitungen bei den üblichen Betriebsbedingungen für andauernde Kondensation ausgelegt sind; La présente Norme européenne définit les exigences et les méthodes d’essai relatives à la sécurité et au rendement des générateurs d’air chaud à usage non domestique, comportant un ventilateur pour aider l’alimentation en air chaud et/ou l’évacuation des produits de combustion, appelés ci-après « appareils ». Ceci inclut les appareils équipés de brûleurs à air soufflé. La présente Norme européenne s'applique aux appareils de types B12, B13, B14, B22, B23, B42, B43, B44, B52, B53, C12, C13, C32, C33, C62 et C63 de débit calorifique inférieur ou égal à 300 kW (sur le pouvoir calorifique inférieur) destinés à être utilisés dans des locaux autres que l'habitat individuel. Elle s'applique également à des appareils destinés à des installations extérieures. La distribution de l'air chaud peut se faire par des gaines ou directement dans l'espace à chauffer. Pour les appareils de types C62 et C63, la présente Norme européenne ne s'applique que si ceux-ci sont destinés à être installés d'une façon analogue à celle des appareils de type C3. La présente norme ne s'applique pas aux appareils : a) destinés à être utilisés pour un habitat individuel ; b) à condensation ; c) équipés de brûleurs atmosphériques sans ventilateur pour l'alimentation en air de combustion et/ou l'évacuation des produits de combustion ; d) de climatisation à usage double (chauffage et refroidissement de l'air) ; e) de chauffage de l'air par un fluide caloporteur intermédiaire ; f) comportant des clapets de fumée manuels ou automatiques ; g) portatifs ou transportables à convection forcée ; h) comportant plusieurs buses d'évacuation ; i) intégrés à une ou plusieurs buses d’évacuation: j) conçus pour une condensation continue dans le système d’évacuation dans des conditions normales de fonctionnement ; k) équipés de conduits d’évacuation de produits de combustible, de POCED non métalliques. |
| ICS: | 97.100.20 - Aparatos de calefacción a gas |
| CTN: | CEN/TC 180 - 6161 |










