ASTM E165/E165M - 18
Standard Practice for Liquid Penetrant Testing for General Industry
| Aviso: | Las normas ASTM en lectura se visualizan a través del área decliente. Los archivos no se pueden descargar |
|---|---|
| Fecha edición: |
2018-11-15
Anulada
|
| Fecha cancelación: | 2018-11-15 |
| Idiomas disponibles: | Inglés |
| Resumen: | |
| Keywords: | fluorescent liquid penetrant examination; hydrophilic emulsification; lipophilic emulsification; liquid penetrant examination; nondestructive examination; solvent removable; visible liquid penetrant examination; water-washable; post-emulsified; ultraviolet light; UV-A; visible light; |
| Scope: | 1.1 This practice2 covers procedures for penetrant examination of materials. Penetrant testing is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, shrinkage, laminations, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance examinations. It can be effectively used in the examination of nonporous, metallic materials, ferrous and nonferrous metals, and of nonmetallic materials such as nonporous glazed or fully densified ceramics, as well as certain nonporous plastics, and glass. 1.2 This practice also provides a reference: 1.2.1 By which a liquid penetrant examination process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications and procedures dealing with the liquid penetrant testing of parts and materials. Agreement by the customer requesting penetrant testing is strongly recommended. All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.2.3 For use in the organization of facilities and personnel concerned with liquid penetrant testing. 1.3 This practice does not indicate or suggest criteria for evaluation of the indications obtained by penetrant testing. It should be pointed out, however, that after indications have been found, they must be interpreted or classified and then evaluated. For this purpose there must be a separate code, standard, or a specific agreement to define the type, size, location, and direction of indications considered acceptable, and those considered unacceptable. 1.4 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| ICS: | 19.100 - Ensayos no destructivos |
| CTN: | E07.03 - E07.03 |
|
Otras Relaciones |
Es referenciada por E3022 - 25 Es referenciada por A333/A333M - 24 Es referenciada por A815/A815M - 24a Es referenciada por A426/A426M - 25 Es referenciada por A275/A275M - 23 Es referenciada por C773 - 88(2025) Es referenciada por B884 - 11(2025) Es referenciada por E608/E608M - 24 Es referenciada por A632 - 19(2025) Es referenciada por A903/A903M - 99(2024) Es referenciada por A0352_A0352M-21 Es referenciada por A0957_A0957M-21 Es referenciada por B0026_B0026M-18E01 Es referenciada por E1208-21 Es referenciada por E1418-21 Es referenciada por A0985_A0985M-21 Es referenciada por E1210-21 Es referenciada por B0108_B0108M-19 Es referenciada por E2982-21 Es referenciada por A834 - 24 |
Normas citadas
Libros relacionados
Normas relacionadas
Colecciones temáticas relacionadas
