Filtrar:
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS3273E
En Vigor
2005-05-31
Chloroprene (CR) Rubber Sheet, Nylon Cloth Reinforced Weather Resistant
SAE
SAE AMS3303L
En Vigor
2019-02-27
Elastomer: Silicone, Rubber (MQ/VMQ) General Purpose 55 - 65 Durometer
Type "A" Hardness
SAE
SAE
SAE AMS3605D
En Vigor
1957-01-01
PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE
SAE
SAE
SAE
SAE
SAE AIR1077A
En Vigor
2011-12-19
Metallic Seal Rings for High Temperature Reciprocating Hydraulic Service
SAE
SAE
SAE
SAE
SAE AMS1525E
En Vigor
2023-05-22
Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent, Cold Operations
SAE
SAE
SAE
SAE AMS3045E
En Vigor
2014-08-29
Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use
SAE
SAE
SAE
SAE AMS2633D
En Vigor
2017-10-30
Ultrasonic Inspection Centrifugally-Cast, Corrosion-Resistant Steel
Tubular Cylinders
SAE
SAE
SAE
SAE AMS3777/6B
En Vigor
1995-10-01
Tape, Nylon, Nonmelting, Reinforcing 5/16 (8) Wide, 350 (1555 N)
Breaking Strength
SAE
SAE
SAE
SAE
SAE
SAE AMS3584B
En Vigor
1991-10-01
PLASTIC TUBING, ELECTRICAL INSULATION Polytetrafluoroethylene, Heat
Shrinkable Overexpanded
SAE
SAE
SAE AMS1428D
En Vigor
2002-02-20
Fluid, Aircraft Deicing/Anti-icing, Non-Newtonian (Pseudoplastic), SAE
Types II, III, and IV
SAE
SAE
SAE
SAE
SAE AMS2269D
En Vigor
1988-07-01
CHEMICAL CHECK ANALYSIS LIMITS Wrought Nickel Alloys and Cobalt Alloys
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS3107/1A
En Vigor
2022-08-10
Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 to +95
°C (-67 to +203 °F)
SAE
SAE
SAE
SAE AMS3605E
En Vigor
2011-08-09
PLASTIC SHEET, POST-FORMING Cotton Fabric Reinforced Phenol-Formaldehyde
SAE
SAE AMS3281D
En Vigor
2008-03-26
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel
Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F
(182 °C)
SAE
SAE AMS3677A
En Vigor
2011-08-25
Fabric, Polybenzimidazole (PBI) Polyamide Fiberglass
Polytetrafluoroethylene (PTFE) Impregnated, Sintered
SAE
SAE AMS3389A
En Vigor
1961-07-01
HOSE, SYNTHETIC RUBBER, AIRCRAFT FUELING Double Wire Braid Reinforced, Noncollapsing
SAE
SAE AMS3678/2
En Vigor
2006-06-20
Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE)
Moldings or Extrusions
SAE
SAE AMS5751C
En Vigor
1981-04-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 54Ni -
17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution,
Stabilization, and Precipitation Treated Consumable Electrode or Vacuum
Induction Melted
SAE
SAE AMS5768J
En Vigor
2000-09-01
Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 21Cr -
20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and
Precipitation Heat Treated
SAE
SAE AMS4966S
En Vigor
2022-10-13
Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE
SAE
SAE
SAE AMS5528H
En Vigor
2012-10-12
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1Al
Solution Heat Treated, Precipitation Hardenable
SAE










