Normas SAE
Filtrar:
SAE
SAE
SAE
SAE AMS3046J
En Vigor
2024-12-05
Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged
SAE
SAE AMS4167B
En Vigor
1968-11-01
ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.26Cr (7075-T73511)
Stress-Relief Stretched and Straightened
SAE
SAE
SAE AMS4041Q
En Vigor
2007-08-24
Aluminum Alloy, Alclad Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn Alclad
2024 and 1-1/2% Alclad 2024, -T3 Flat Sheet; 1-1/2% Alclad 2024-T351 Plate
SAE
SAE
SAE
SAE
SAE AMS4287C
En Vigor
2025-02-25
Aluminum Alloy, Extrusion, 2.7Cu - 1.8Li - 0.7Zn - 0.3Mn - 0.3Mg -
0.08Zr (2099-T83), Solution Heat Treated, Stress Relieved by Stretching
1 to 4% and Aged
SAE
SAE AMS3672B
En Vigor
1992-10-01
PLASTIC MOLDING COMPOUND, EPI-BIS EPOXY Glass Fiber Reinforced, Structural
SAE
SAE AS63480-3
En Vigor
2016-12-12
AS63480-529 Nut, Self-Locking, Shank, Flange Restrained, Heat & CR
Steel A286, Silver Coated Thread Only, Classification Rm ≥ 1100 MPa
(160,000 lbf/in²) @ TA / +650°C
SAE
SAE AMS4422L
En Vigor
1980-04-15
MAGNESIUM ALLOY CASTINGS, SAND 6.0A1 - 3.0Zn (AZ63-T4) Solution Heat Treated
SAE
SAE
SAE AIR26
En Vigor
2011-08-10
NUMBER 70-90, 70L-90, 80-100 AND 80L-100 PROPELLER SHAFT ENDS DUAL
ROTATION (PROPELLER SUPPLIED BEARING)
SAE
SAE
SAE AMS3831B
En Vigor
2016-12-15
Cloth, Type “E” Glass, “B” Stage Epoxy-Resin-Impregnated 7781 Style
Fabric, Flame Resistant, Improved Strength
SAE
SAE AMS2806A
En Vigor
1990-01-01
IDENTIFICATION Bars, Wire, Mechanical Tubing, and Extrusions Carbon and
Alloy Steels and Corrosion and Heat Resistant Steels and Alloys
SAE
SAE
SAE AMS4441D
En Vigor
2000-10-01
Magnesium Alloy Castings, Sand 3.5Ce - 0.70Zr (EK41A-T6) Solution and
Precipitation Heat Treated
SAE
SAE
SAE
SAE
SAE AMS4773G
En Vigor
2016-02-02
Silver Alloy, Brazing Filler Metal 60Ag – 30Cu – 10Sn 1115 to 1325 °F
(602 to 718 °C) Solidus-Liquidus Range
SAE
SAE AMS3587B
En Vigor
1982-04-01
PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented,
Very Flexible, Heat-Shrinkable (Low Recovery Temperature) 2 to 1 Shrink Ratio
SAE
SAE
SAE
SAE
SAE
SAE AMS4575F
En Vigor
2017-02-09
Nickel-Copper Alloy Tubing, Brazed, Corrosion Resistant 67 Ni - 31Cu Annealed
SAE
SAE AIR4994A
En Vigor
2013-11-11
High Pressure Pneumatic Compressors Users Guide For Aerospace Applications
SAE
SAE
SAE AMS4534C
En Vigor
2013-02-07
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat
Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
SAE
SAE
SAE
SAE AMS4218J
En Vigor
2015-10-29
Aluminum Alloy Castings 7.0Si - 0.35Mg (A356.0-T6) (Formerly T6P Temper)
Solution and Precipitation Heat Treated
SAE
SAE
SAE
SAE
SAE AMS4786K
En Vigor
2021-08-27
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au
- 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
SAE
SAE AMS4574B
En Vigor
1954-05-01
NICKEL-COPPER ALLOY TUBING, SEAMLESS, CORROSION RESISTANT 67Ni - 30Cu Annealed
SAE
SAE
SAE AMS4079D
En Vigor
2011-08-09
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, ROUND, CLOSE TOLERANCE 1.0Mg -
0.60Si - 0.28Cu - 0.20Cr (6061-0) Annealed
SAE
SAE
SAE
SAE
SAE AIR1268
En Vigor
2003-05-15
RECOMMENDATIONS FOR SELECTION AND USE OF TORQUE WRENCHES FOR AEROSPACE
PROPULSION SYSTEMS APPLICATIONS
SAE
SAE AMS4976H
En Vigor
2012-09-14
Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Solution and
Precipitation Heat Treated
SAE
SAE AMS3849C
En Vigor
2016-12-15
Cloth, Quartz, Style 581 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE
SAE AMS4765B
En Vigor
1984-01-01
BRAZING FILLER METAL, SILVER 56Ag - 42Cu - 2.0Ni 1420°– 1640°F (770° –
895°C) Solidus-Liquidus Range
SAE
SAE AMS2759/3D
En Vigor
2005-02-11
Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging
Steel Parts
SAE
SAE
SAE AMS4224C
En Vigor
2010-01-05
Aluminum Alloy Castings, Sand, 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn -
0.13T - 0.13V (243.0), Stabilized
SAE
SAE
SAE AMS4341E
En Vigor
2011-11-03
Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511)
Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE
SAE AMS4483B
En Vigor
1985-07-01
MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD 10Al (AM100A-T6) Solution and
Precipitation Heat Treated
SAE
SAE AIR4276A
En Vigor
2011-12-01
Survey Results: Computerization or Reliability, Maintainability &
Supportability (RM&S) in Design
SAE
SAE
SAE AMS3571/4C
En Vigor
2011-09-23
Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75
Durometer “A”
SAE
