Normas SAE
Filtrar:
SAE
SAE
SAE
SAE
SAE
SAE AMS4285E
En Vigor
2011-04-19
Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution
and Precipitation Heat Treated
SAE
SAE AMS1532D
En Vigor
2018-08-23
Cleaner for Aircraft Exterior Surfaces Wipe-On, Wipe-Off, Emulsion-Type
SAE
SAE AMS4476A
En Vigor
2021-02-11
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS2431/8B
En Vigor
2007-05-15
Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High
Hardness (55 to 62 HRC)
SAE
SAE
SAE AMS3849A
En Vigor
2011-08-09
CLOTH, QUARTZ, STYLE 581 FABRIC Hot-Melt, Addition-Type, Polyimide Resin Impregnated
SAE
SAE AMS3307C
En Vigor
2003-11-17
RUBBER, SILICONE (VMQ) Low Compression Set, Non-Oil-Resistant 65 - 75
SAE
SAE AMS4123F
En Vigor
1994-04-01
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 5.6Zn - 2.5Mg -
1.6Cu - 0.23Cr (7075-T651) Solution and Precipitation Heat Treated
SAE
SAE
SAE AMS3136D
En Vigor
1989-10-01
COATING MATERIAL, PHENOLIC RESIN PTFE Pigmented, 150°C (300°F) Cure
SAE
SAE AMS4297A
En Vigor
2011-11-03
Aluminum Alloy Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024; -T4 Flat Sheet)
Solution Heat Treated, High Formability
SAE
SAE
SAE AMS4028C
En Vigor
1967-11-01
ALUMINUM ALLOY SHEET AND PLATE 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-0)
SAE
SAE AMS4147D
En Vigor
2012-02-15
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352)
Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE
SAE
SAE
SAE AMS3731/6C
En Vigor
2016-09-22
Potting Compound, Epoxy Bisphenol A-Type Syntactic Foam, Heat Cure
SAE
SAE
SAE
SAE AMS4443E
En Vigor
1999-02-01
Magnesium Alloy Castings 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated
SAE
SAE
SAE
SAE AMS4319A
En Vigor
1996-10-01
ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2Si - 1.0Mg -
0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress-Relieved, and
Artificially Aged
SAE
SAE
SAE
SAE
SAE
SAE AMS4089F
En Vigor
2020-06-18
Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651)
Solution Heat Treated, Stress Relieved by Stretching, and Precipitation
Heat Treated
SAE
SAE
SAE AMS4785J
En Vigor
2015-12-03
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au
- 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
SAE
SAE
SAE AMS3701A
En Vigor
1993-01-01
EPOXY RESIN, TETRAGLYCIDYL METHYLENEDIANILINE (TGMDA) 10,000 TO 14,000
Centipoise Viscosity
SAE
SAE AMS4274B
En Vigor
2019-12-17
Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-O)
Annealed, Fine Grain
SAE
SAE
SAE AMS4295B
En Vigor
2006-02-20
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr
(2219 - O, F, T31, T351, T37, T81, T851, T87)
SAE
SAE AS44300-4
En Vigor
2020-12-10
AS44300-399 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .375-24
UNJF-3A
SAE
SAE AMS3892/5A
En Vigor
2011-08-09
TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 220
(1515) Tensile Strength, 75 (517) Tensile Modulus
SAE
SAE AMS4767C
En Vigor
1984-01-01
BRAZING FILLER METAL, SILVER 92.5Ag - 7.2Cu - 0.22Li 1435°- 1635°F (780°
- 890°C) Solidus-Liquidus Range
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS4411
En Vigor
2013-05-24
Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr
Solution Heat Treated, Stress Relieved and Overaged
SAE
SAE AMS2466A
En Vigor
2003-06-16
Hard Anodic Coating of Magnesium Alloys Alkaline Type, High Voltage
SAE
SAE
SAE AMS4634
En Vigor
2000-09-01
ALUMINUM BRONZE BARS, RODS, AND FORGINGS 90.5Cu - 7.5Al - 1.9Si Stress Relieved
SAE
SAE
SAE AMS4156K
En Vigor
2015-05-08
Aluminum Alloy, Extrusions 0.68Mg - 0.40Si (6063-T6) Solution and
Precipitation Heat Treated
SAE
SAE
SAE AMS3581C
En Vigor
1995-10-01
CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC Heat Resistant
