Normas SAE
Filtrar:
SAE
SAE
SAE AMS4785K
En Vigor
2021-08-26
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au
- 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
SAE
SAE AMS4036K
En Vigor
2012-04-03
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn
Alclad One Side 2024 and 1-1/2% Alclad One Side 2024-T3 Sheet; 1-1/2%
Alclad One Side 2024-T351 Plate
SAE
SAE AMS3867/4A
En Vigor
2001-04-01
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
SAE
SAE
SAE AMS3845/1B
En Vigor
1992-01-01
Cloth, Type "E" Glass, "B" Stage
Polyimide-Resin-Impregnated 181 Style Fabric, Low-Flow Addition-Cure
Resin for Press Cure At 40 - 100 Psi (275 - 690 Kpa) Or Vacuum/Autoclave Processing
SAE
SAE AIR1898A
En Vigor
2026-02-12
Maintenance of Batteries and Battery Charging and Servicing Facilities
SAE
SAE
SAE AIR1189A
En Vigor
2006-05-22
Airborne Internal Interface Standards for Moderate Bit Rate Digital Time
Division-Multiplex Systems
SAE
SAE AMS4132G
En Vigor
2013-02-07
Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock
2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and
Precipitation Heat Treated
SAE
SAE
SAE
SAE
SAE
SAE AMS4601B
En Vigor
2025-07-09
Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr
Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)
SAE
SAE
SAE
SAE AMS4107G
En Vigor
2018-03-04
Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE
SAE AMS3788/3A
En Vigor
1994-04-01
CLOTH, NYLON TWILL 5.4 Ounces per Square Yard (183 g/m2), Smooth Finish
SAE
SAE AMS4167J
En Vigor
2012-01-09
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511)
Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE
SAE
SAE AMS4377F
En Vigor
1984-07-01
MAGNESIUM ALLOY SHEET AND PLATE 3.0Al - 1.0Zn (AZ31B-H24) Cold Rolled,
Partially Annealed
SAE
SAE
SAE
SAE
SAE AMS4150F
En Vigor
1974-12-01
ALUMINUM ALLOY EXTRUSIONS AND RINGS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6)
SAE
SAE
SAE AMS4235C
En Vigor
2015-06-02
Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7)
Solution and Precipitation Heat Treated
SAE
SAE AMS4071H
En Vigor
1979-01-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND 2.5Mg - 0.25Cr
(5052-0) UNS A95052
SAE
SAE AMS3710C
En Vigor
2022-12-29
Sandwich Structures, Glass Fabric-Resin Low Pressure Molded, Heat Resistant
SAE
SAE
SAE
SAE
SAE AMS3274H
En Vigor
2011-08-25
Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth
Reinforced Fuel Resistant
SAE
SAE
SAE
SAE
SAE AMS4229H
En Vigor
2025-09-10
Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg
- 0.25Ti (A201.0-T7), Solution Heat Treated and Overaged
SAE
SAE
SAE AMS3678/3B
En Vigor
2016-02-29
Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin
Polytetrafluoroethylene (PTFE) Moldings or Extrusions
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS4160K
En Vigor
2025-05-03
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed
SAE
SAE
SAE
SAE AMS4120T
En Vigor
2025-12-04
Aluminum Alloy, Rolled or Cold-Finished Bars, Rods, and Wire, 4.4Cu -
1.5Mg - 0.60Mn (2024), Solution Heat Treated and Naturally Aged (T4),
Solution Heat Treated, Cold Worked, and Naturally Aged (T351)
SAE
SAE
SAE AMS4211D
En Vigor
2025-04-14
Aluminum Alloy, Plate, 6.2Zn - 1.9Cu - 2.1Mg - 0.10Zr (7040-T7451),
Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE AMS3656A
En Vigor
1966-03-01
POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered,
Radiographically Inspected
SAE
SAE AMS3678/14A
En Vigor
2016-02-29
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings
or Extrusions
SAE
SAE AMS4458B
En Vigor
2022-11-22
Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat
Treated, Cold Worked, and Artificially Aged
SAE
SAE
SAE
SAE
SAE
SAE AMS4161H
En Vigor
2013-04-19
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4)
Solution Heat Treated and Naturally Aged
