Normas SAE
Filtrar:
SAE
SAE AMS3226F
En Vigor
1983-04-01
ACRYLONITRILE BUTADIENE (NBR) RUBBER Hot Oil and Coolant Resistant, Low
Swell 45 - 55
SAE
SAE
SAE AMS2431/2D
En Vigor
2007-05-15
Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC)
SAE
SAE
SAE
SAE AMS3807B
En Vigor
2006-01-06
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive
SAE
SAE AIR1169A
En Vigor
1990-05-24
BIBLIOGRAPHY OF REFERENCES PERTAINING TO THE EFFECTS OF OXYGEN ON
IGNITION AND COMBUSTION OF MATERIALS
SAE
SAE
SAE AMS3798/11C
En Vigor
2015-04-14
Webbing, Low Modulus Aramid 1-3/4 (44) Wide, 10,000 (44,482) Breaking
Strength Herringbone Twill
SAE
SAE
SAE
SAE
SAE
SAE AMS4095B
En Vigor
2000-09-01
Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked
Alclad 2219-T351; Plate, Solution Heat Treated and Stress Relieved
SAE
SAE AMS3301K
En Vigor
2024-04-25
Elastomer: Silicone Rubber (MQ/VMQ), General Purpose, 35 - 45 Durometer
Type ‘A’ Hardness
SAE
SAE AMS3797/9A
En Vigor
1989-01-01
WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1-1/8 (28) Wide, 9000 (40,034)
Breaking Strength
SAE
SAE AMS3658D
En Vigor
2008-03-17
Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and
Stress-Relieved Radiographically Inspected
SAE
SAE AMS4123C
En Vigor
1966-09-01
ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED 5.6Zn - 2.5Mg - 1.6Cu -
0.30Cr (7075-T651) Stress-Relief Stretched
SAE
SAE AMS4041S
En Vigor
2018-04-03
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024,
-T3 Sheet/-T351 Plate with 1½% Alclad) Solution Heat Treated, Cold
Worked and Naturally Aged
SAE
SAE
SAE AMS4090H
En Vigor
2025-12-16
Aluminum Alloy, Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T651),
Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE
SAE AMS3814/14
En Vigor
1993-10-01
CORD, CORELESS, PARA-ARAMID Intermediate Modulus 2750 lb (12 230 N), 100
ft per lb (65 m/Kg)
SAE
SAE AMS3598C
En Vigor
1994-04-01
PLASTIC SHEET, COPPER FACED Glass Cloth Reinforced Polytetrafluoroethylene
SAE
SAE AMS3906B
En Vigor
1997-10-01
Glass Tape and Flat Sheet, Non-Woven Cloth Epoxy Resin Impregnated, For
Hand and Machine Layup
SAE
SAE AMS3870D
En Vigor
1993-01-01
CERAMIC MOLDINGS AND EXTRUSIONS Dense, Ultra-High Alumina (99% Al2O3)
SAE
SAE
SAE AMS3806F
En Vigor
2013-11-27
Cloth, Airplane, Mercerized Cotton 80 Pounds Force (356 N) Breaking Strength
SAE
SAE AMS3756B
En Vigor
2008-06-16
Moldings, Glass Fiber Filled Polytetrafluoroethylene (PTFE) 75% PTFE
Resin, 25% Glass Fibers, As Sintered
SAE
SAE
SAE AMS4158A
En Vigor
1981-07-01
Aluminum Alloy, Extrusions 6.8 Zn - 2.75 Mg - 2.0 Cu - 0.3 Cr (7178-T6)
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE AGS1219-4
En Vigor
1958-02-12
AGS1219 Dimensions of Tapped Holes in Components for Connecting A.G.S.
Pipe Couplings Direct
SAE
SAE
SAE AMS3660A
En Vigor
1976-07-01
POLYTETRAFLUOROETHYLENE MOLDINGS General Purpose Grade, As Sintered
SAE
SAE
SAE AMS3217/8A
En Vigor
2017-10-18
Test Slabs, Fluoroelastomer (FKM), 70–80 Hardness, for Improved Gas
Turbine Engine Oil Compatibility
SAE
SAE AMS3357D
En Vigor
1976-07-01
SILICONE RUBBER Lubricating Oil and Compression Set Resistant 65 - 75
SAE
SAE
SAE
SAE AMS4132B
En Vigor
1976-01-01
ALUMINUM ALLOY FORGINGS 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61)
SAE
SAE AMS4376F
En Vigor
1995-05-01
Plate, Magnesium Alloy 3.0Al - 1.0Zn - 020Mn (AZ31B-H26) Cold Rolled and
Partially Annealed
SAE
SAE AMS3386B
En Vigor
1964-06-01
HOSE, SYNTHETIC RUBBER, AIRCRAFT FUELING Textile Reinforced, Collapsing
SAE
SAE
SAE
SAE
SAE AMS3625B
En Vigor
1994-04-01
ELASTOMERIC TUBING, ELECTRICAL INSULATION Crosslinked Silicone,
Pigmented, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio
SAE
SAE AS48700-4
En Vigor
2007-01-01
AS48700-799 Bolt, Machine, Double Hexagon Extended Washer Head, P.D.
Shank, Inconel 718, 0.3750 - 24UNJF - 3A.ISO3161
SAE
SAE AMS2370E
En Vigor
1995-05-01
QUALITY ASSURANCE SAMPLING AND TESTING Carbon and Low-Alloy Steel
Wrought Products and Forging Stock
SAE
SAE AIR64
En Vigor
1956-12-01
EQUIPMENT COOLING IN PRESENT AND IMMEDIATE FUTURE CIVIL TRANSPORT AIRCRAFT
SAE
SAE AMS3904/1B
En Vigor
1999-03-01
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 200 Denier (220
Dtex), 1.0% Finish
SAE
SAE AMS3898/8A
En Vigor
2022-04-13
Interleaf Carrier Material, Composite Tape/Broadgoods Kraft,
Differentially Coated Paper, Unperforated 0.0038 inch ± 0.0004 (0.097 mm
± 0.010)
SAE
SAE
SAE
SAE AMS4114F
En Vigor
1985-07-01
ALUMINUM ALLOY BARS AND RODS, ROLLED OR COLD-FINISHED 2.5Mg - 0.25Cr
(5052-F) As Fabricated
SAE
SAE AIR46B
En Vigor
2014-05-01
The Preparation and Use of Chromel-Alumel Thermocouples for Aircraft Gas
Turbine Engines
