Normas SAE
Filtrar:
SAE
SAE AMS4122G
En Vigor
1987-01-01
ALUMINUM ALLOY BARS AND RODS, ROLLED, DRAWN, OR COLD FINISHED, AND RINGS
5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
SAE
SAE AMS3793/5B
En Vigor
2013-09-11
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/8 Inches
(28 mm), 0.23 to 2.00 Ounces per Yard (7.1 to 62.0 g/m)
SAE
SAE AMS4147C
En Vigor
2000-08-01
Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr(7075-T7352)
Solution Heat Treated, Stress Relieved by Compression, and Overaged
SAE
SAE AMS3814/1
En Vigor
1993-10-01
Cord, Coreless, Para-aramid Intermediate Modulus 35 lb (155 N), 13 500
ft per lb (9070 m/kg)
SAE
SAE AMS3867/3A
En Vigor
1984-10-01
BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B8.0-E375 (Type B0.200-E190)
SAE
SAE AMS3689A
En Vigor
1981-10-01
ADHESIVE, FOAMING, HONEYCOMB CORE SPLICE, STRUCTURAL -67° to +350°F
(-55° to +175°C)
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS3904/2C
En Vigor
2016-08-01
Yarn, Organic Fiber (Para-Aramid) Intermediate Modulus 400 Denier (440
Dtex), 1.0% Finish
SAE
SAE AMS3639C
En Vigor
1975-06-01
PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear,
Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE
SAE
SAE
SAE
SAE AMS3867/5B
En Vigor
2016-10-12
Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)
SAE
SAE AMS3678A
En Vigor
2004-11-16
Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled,
Pigmented, and Filled Components
SAE
SAE AMS4067E
En Vigor
1976-07-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, ROUND 1.25Mn - 0.12Cu (3003-H14)
SAE
SAE AMS3898/4B
En Vigor
2022-04-13
Interleaf Carrier Material, Composite Tape Paper, 0.04 inch (0.10 mm), Perforated
SAE
SAE
SAE AMS3588B
En Vigor
1982-04-01
PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Very
Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE
SAE AMS3906/6B
En Vigor
1997-10-01
Glass Non-Woven Fiber Tape and Flat Sheet Epoxy Resin Impregnated, For
Hand and Machine Layup GL-I-36 - 95 (203)
SAE
SAE
SAE AMS3731/8C
En Vigor
2016-09-22
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, High HDT
SAE
SAE AMS3603A
En Vigor
2002-08-21
Protective Film, High Performance, Polymeric Pressure Sensitive
Adhesive, for Aircraft Exterior Applications
SAE
SAE AMS3568/3B
En Vigor
2011-08-25
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic
Foot (320 kg/m3) Density
SAE
SAE AMS3798/15C
En Vigor
2015-04-14
Webbing, Low Modulus Aramid 1 (25) Wide, 2500 (11,121) Breaking Strength
Herringbone Twill
SAE
SAE AMS4130K
En Vigor
1995-05-01
ALUMINUM ALLOY DIE FORGINGS 4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution
and Precipitation Heat Treated
SAE
SAE
SAE
SAE
SAE AMS3200J
En Vigor
1998-11-01
Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid
Resistant 55 - 65
SAE
SAE AMS3619E
En Vigor
2016-11-16
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
SAE
SAE
SAE AMS3571/4A
En Vigor
1984-07-01
RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 75
Durometer "A"
SAE
SAE
SAE
SAE AMS3798/12A
En Vigor
1989-04-01
WEBBING, LOW MODULUS ARAMID 1 (25) Wide, 9000 (40,034) Breaking Strength
Special Weave
SAE
SAE
SAE AMS4009C
En Vigor
2017-05-30
Aluminum Alloy Foil 1.0Mg - 0.6Si - 0.30Cu - 0.20Cr (6061-0) Annealed
SAE
SAE
SAE
SAE AMS3655A
En Vigor
1991-10-01
TUBING, ELECTRICAL INSULATION Thin Wall, Extruded
Polytetrafluoroethylene (PTFE)
SAE
SAE AMS3616C
En Vigor
1996-10-01
Resin, Polyimide, Laminating and Molding High Temperature Resistant,
370°C (700°F) Unfilled, Addition Polymer
SAE
SAE
SAE AMS3331D
En Vigor
2024-08-12
Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75
Durometer Type ‘A’ Hardness For Products in Fuel Systems/Lubricating Oils
SAE
SAE AMS3689B
En Vigor
2022-08-10
Adhesive, Foaming, Honeycomb, Core Splice, Structural −54 to +177 °C
(−65 to +350 °F)
SAE
SAE
SAE
SAE AMS3677
En Vigor
2005-05-31
Fabric, Polybenzimidazole (PBI) Polyamide Fiberglass
Polytetrafluoroethylene (PTFE) Impregnated, Sintered
SAE
SAE
SAE
SAE
SAE AMS4111C
En Vigor
2001-11-15
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73)
Solution and Precipitation Heat Treated
SAE
SAE AMS3793/3B
En Vigor
2013-09-11
Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/4 Inch (19
mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m)
SAE
SAE
SAE
SAE AMS3793/6A
En Vigor
1996-03-01
TAPE AND WEBBING, TEXTILE, PARA-ARAMID Intermediate Modulus 1-1/4 Inches
(31 mm), 0.23 Ounces per Yard (7.1 g/m)
SAE
