AENOR Logo

Normas SAE

49607 Resultados disponibles

Filtrar:

(40721)
(8886)
SAE

SAE AMS4094B
En Vigor
1997-09-01
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved and Precipitation Heat Treated
 
SAE

SAE AMS1424A
En Vigor
1996-10-01
DEICING/ANTI-ICING FLUID, AIRCRAFT, SAE Type I
 
SAE

SAE AMS4083F
En Vigor
1968-11-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6)
 
SAE

SAE AMS6370N
En Vigor
2011-05-17
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
 
SAE

SAE AMS4777J
En Vigor
2018-08-28
Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
 
SAE

SAE AIR4651
En Vigor
1992-02-01
EFFECTS OF NO-BREAK POWER TRANSFER ON 400 HZ AUXILIARY-POWER UNITS AND GROUND-POWER UNITS
 
SAE

SAE AMS3226D
En Vigor
1965-02-01
SYNTHETIC RUBBER Hot Oil and Coolant Resistant, Low Swell 45 - 55
 
SAE

SAE AMS5399B
En Vigor
1983-07-01
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
 
SAE

SAE AMS2416F
En Vigor
1983-07-10
NICKEL-CADMIUM PLATING Diffused
 
SAE

SAE AIR5128
En Vigor
2007-12-04
ELECTRICAL BONDING OF AIRCRAFT FUEL SYSTEM PLUMBING SYSTEMS
 
SAE

SAE AIR1289A
En Vigor
2021-03-11
EVALUATION OF HELICOPTER TURBINE ENGINE LINEAR VIBRATION ENVIRONMENT
 
SAE

SAE AMS4484C
En Vigor
1949-11-01
MAGNESIUM ALLOY CASTINGS, PERMANENT MOLD AZ92 Solution and Precipitation Treated
 
SAE

SAE AMS4080A
En Vigor
1942-08-01
ALUMINUM ALLOY TUBING Magnesium Silicon Copper (61S-0)
 
SAE

SAE AMS4193A
En Vigor
1983-01-01
ALUMINUM ALLOY SHEET AND PLATE 4.4Cu - 1.5Mg - 0.60Mn (2024-T861)
 
SAE

SAE AMS2470N
En Vigor
2013-07-08
Anodic Treatment of Aluminum Alloys Chromic Acid Process
 
SAE

SAE AMS7279F
En Vigor
1983-07-01
RINGS, SEALING, FLUOROCARBON RUBBER High Temperature Fluid Resistant 85 - 95
 
SAE

SAE AMS1731A
En Vigor
1991-10-01
UREA COMPOUND, POWDER
 
SAE

SAE AMS3823E
En Vigor
2015-07-06
Cloth, Glass Style 7781, Chrome-Silane Finish
 
SAE

SAE AMS4085A
En Vigor
1978-10-01
ALUMINUM ALLOY SHEET 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761)
 
SAE

SAE AMS4387D
En Vigor
1994-04-01
MAGNESIUM ALLOY EXTRUSIONS 2.3Zn - 0.62Zr (ZK21A-F) As Extruded
 
SAE

SAE AMS2804B
En Vigor
1995-05-01
IDENTIFICATION Castings
 
SAE

SAE AMS2601E
En Vigor
1988-04-01
PRESSURE TESTING, AIR 10 psi
 
SAE

SAE AIR851C
En Vigor
2014-05-06
O-Ring Tension Testing Calculations
 
SAE

SAE AMS4039B
En Vigor
1967-11-01
ALUMINUM ALLOY PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (Alclad 7075-T651) Stress-Relief Stretched
 
SAE

SAE AMS4820C
En Vigor
1980-01-15
BEARINGS, LEADED COPPER 70.5 Cu - 28.5 Pb - 1.1 Ag Steel Back
 
SAE

SAE AMS4071B
En Vigor
1949-02-01
ALUMINUM ALLOY TUBING 2.5Mg - 0.25Cr (52S) Hydraulic
 
SAE

SAE AGS1239-2
En Vigor
1958-07-12
AGS1239 Union Nut (Steel) 1/4" B.S.P.F. Re-Usable End Fittings for 1/4" I/D Non Fire Resistant Hose to Spec. D.T.D. (R.D.I.) 3951
 
SAE

SAE AMS2588
En Vigor
2022-10-26
Ultrasonically Activated Needle Peen Forming
 
SAE

SAE AMS4625A
En Vigor
1941-09-01
PHOSPHOR BRONZE Rods and Bars (Hard)
 
SAE

SAE AMS4315
En Vigor
2011-08-25
Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
 
SAE

SAE AMS6371E
En Vigor
1972-05-15
STEEL TUBING, MECHANICAL 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
 
SAE

SAE AMS5517N
En Vigor
2024-04-10
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni (301) Cold Rolled, 125 ksi (862 MPa) Tensile Strength
 
SAE

SAE AIR1362
En Vigor
1991-11-01
PHYSICAL PROPERTIES OF HYDRAULIC FLUIDS
 
SAE

SAE AMS3798/5C
En Vigor
2015-04-14
Webbing, Low Modulus Aramid 1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill, Resin Treated
 
SAE

SAE AMS2471K
En Vigor
2022-01-28
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
 
SAE

SAE AMS4763A
En Vigor
2009-06-10
Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
 
SAE

SAE AMS6396G
En Vigor
2020-02-18
Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed
 
SAE

SAE AIR825/14
En Vigor
2021-08-11
Basic Aircraft Oxygen Systems Design
 
SAE

SAE AMS2668C
En Vigor
1991-10-01
Brazing, Silver, For Flexible Metal Hose, 400°F (200°C) Max Operating Temperature
 
SAE

SAE AMS4988A
En Vigor
2008-01-03
Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated