AENOR Logo

Normas SAE

49607 Resultados disponibles

Filtrar:

(40721)
(8886)
SAE

SAE AMS3274H
En Vigor
2011-08-25
Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant
 
SAE

SAE AMS4229H
En Vigor
2025-09-10
Aluminum Alloy Castings, High Strength, 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7), Solution Heat Treated and Overaged
 
SAE

SAE AMS4132G
En Vigor
2013-02-07
Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
 
SAE

SAE AMS4127B
En Vigor
1962-01-01
ALUMINUM ALLOY FORGINGS 1Mg - 0.6Si - 0.3Cu - 0.25Cr (6061-T6)
 
SAE

SAE AMS3156E
En Vigor
2008-12-15
Oil, Fluorescent Penetrant, Water Washable
 
SAE

SAE AMS2425G
En Vigor
2025-09-23
Plating, Gold, for Thermal Control
 
SAE

SAE AIR1189A
En Vigor
2006-05-22
Airborne Internal Interface Standards for Moderate Bit Rate Digital Time Division-Multiplex Systems
 
SAE

SAE AMS4756A
En Vigor
1997-03-01
Solder 97.5pb 1.5ag 1sn
 
SAE

SAE AIR790D
En Vigor
2020-09-18
Considerations on Ice Formation in Aircraft and Engine Fuel Systems
 
SAE

SAE AMS4458B
En Vigor
2022-11-22
Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked, and Artificially Aged
 
SAE

SAE AMS3656A
En Vigor
1966-03-01
POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
 
SAE

SAE AMS2424D
En Vigor
1993-07-01
PLATING, NICKEL Low-Stressed Deposit
 
SAE

SAE AMS3678/14A
En Vigor
2016-02-29
Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
 
SAE

SAE AMS4161H
En Vigor
2013-04-19
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
 
SAE

SAE AMS2452
En Vigor
2025-01-09
Superfinishing of HVOF Applied Tungsten Carbide Coatings
 
SAE

SAE AMS4130F
En Vigor
1952-02-01
ALUMINUM ALLOY FORGINGS 4.5Cu - 0.8Si - 0.8Mn (25S-T6)
 
SAE

SAE AMS2350AT
En Vigor
1981-04-01
STANDARDS AND TEST METHODS
 
SAE

SAE AGS1617-4
En Vigor
1934-12-11
AGS1617 Cleats, Single Hole Attachment (Light Alloy)
 
SAE

SAE AMS3082A
En Vigor
1944-08-01
Compound-Anti-Seize, (Mica Base)
 
SAE

SAE AIR5426
En Vigor
2013-01-02
Fitting and Fitting Assembly Selection, Installation, Inspection and Maintenance of
 
SAE

SAE AMS4245B
En Vigor
1996-07-01
ALUMINUM ALLOY, WELDING WIRE 5.0Si - 1.2Cu - 0.50Mg (355)
 
SAE

SAE AIR860B
En Vigor
2011-10-17
Aircraft Electrical Heating Systems
 
SAE

SAE AMS3678/1B
En Vigor
2010-11-30
Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions
 
SAE

SAE AMS3817B
En Vigor
1983-01-01
BRAID, FLAT, NYLON, ELECTRICAL TYING Resin Coated
 
SAE

SAE AIR1296
En Vigor
2020-01-31
CONCURRENT DESIGN OF ENGINES AND SPECIFICATIONS OF STARTING SYSTEMS FOR HELICOPTERS
 
SAE

SAE AMS4094A
En Vigor
1987-10-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved and Precipitation Heat Treated
 
SAE

SAE AGS1514-9
En Vigor
1963-05-07
AGS1514 Sleeves, Identification Cable, H.T. Black and Red
 
SAE

SAE AMS4217A
En Vigor
1945-05-01
ALUMINUM ALLOY CASTINGS Sand 7 Silicon Solution and Precipitation (356-T6)
 
SAE

SAE AMS2640E
En Vigor
1955-08-01
MAGNETIC PARTICLE INSPECTION
 
SAE

SAE AMS4021H
En Vigor
2017-05-30
Aluminum Alloy, Alclad Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061-0) Annealed
 
SAE

SAE AMS4182H
En Vigor
2016-03-15
Aluminum Alloy, Wire 5.0Mg - 0.12Mn - 0.12Cr (5056-O) Annealed
 
SAE

SAE AMS1538B
En Vigor
2012-07-09
Deoxidizer, Acidic, for Magnesium Alloys
 
SAE

SAE AMS4466A
En Vigor
2017-09-13
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet & Plate) Solution Heat Treated, 6% Cold Worked and Naturally Aged
 
SAE

SAE AMS3128F
En Vigor
2005-05-31
Aluminum Pigment Paste
 
SAE

SAE AMS4164A
En Vigor
1962-01-01
ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
 
SAE

SAE AMS2700D
En Vigor
2011-07-08
Passivation of Corrosion Resistant Steels
 
SAE

SAE AMS3125G
En Vigor
2009-06-17
Enamel, Glyceryl Phthalate Engine Gray Baking
 
SAE

SAE AGS1153-3
En Vigor
1942-03-31
AGS1153 End Connection for Self Sealing Fuel Hose End Cap
 
SAE

SAE AMS2202D
En Vigor
1960-11-15
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
 
SAE

SAE AMS4316B
En Vigor
2019-09-10
Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075; -T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
 
SAE

SAE AMS3788/3A
En Vigor
1994-04-01
CLOTH, NYLON TWILL 5.4 Ounces per Square Yard (183 g/m2), Smooth Finish
 
SAE

SAE AMS4076A
En Vigor
1942-12-01
ALUMINUM ALLOY TUBING Magnesium Silicon Chromium (53S-W)
 
SAE

SAE AMS3170B
En Vigor
1953-12-01
THINNER Alcohol - Ester
 
SAE

SAE AMS1541A
En Vigor
1982-04-01
CLEANER, FUEL DROP TANK Water-Soluble
 
SAE

SAE AMS2535B
En Vigor
2015-10-22
Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for Microcircuits
 
SAE

SAE AGS3410-5
En Vigor
1970-05-22
AGS3410 Union Nut - 5/16" O/D. Pipe - Unified
 
SAE

SAE AMS3678/3B
En Vigor
2016-02-29
Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions
 
SAE

SAE AMS4150F
En Vigor
1974-12-01
ALUMINUM ALLOY EXTRUSIONS AND RINGS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6)
 
SAE

SAE AMS2202C
En Vigor
1960-06-30
TOLERANCES Aluminum and Magnesium Alloy Sheet and Plate
 
SAE

SAE AGS3424-4
En Vigor
1961-04-28
AGS3424 Straight Union (Static)
 
SAE

SAE AGS987-6
En Vigor
1978-11-01
AGS987 Female Flanges (Bolted.) with Spigot (Steel)
 
SAE

SAE AMS3303D
En Vigor
1960-01-01
SILICONE RUBBER General Purpose (55 - 65)
 
SAE

SAE AMS4785K
En Vigor
2021-08-26
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
 
SAE

SAE AMS3867/4A
En Vigor
2001-04-01
Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
 
SAE

SAE AMS4160K
En Vigor
2025-05-03
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed
 
SAE

SAE AMS1625B
En Vigor
2000-06-01
Desmutter, Aluminum Powdered
 
SAE

SAE AMS3814/13A
En Vigor
1996-02-01
Cord, Coreless, Para-Aramid Intermediate Modulus 250 Lb (1110 N), 1800 Ft Per Lb (1210 M/Kg)
 
SAE

SAE AMS4235C
En Vigor
2015-06-02
Aluminum Alloy Castings 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T7) Solution and Precipitation Heat Treated
 
SAE

SAE AIR1380B
En Vigor
2002-02-28
Recommended Practice for Measurement of Static Mechanical Stiffness Properties of Aircraft Tires
 
SAE

SAE AMS2772F
En Vigor
2011-07-27
Heat Treatment of Aluminum Alloy Raw Materials