AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AS2390
En Vigor
2013-07-16
Chemical Process Test Specimen Material
 
SAE

SAE AS7108/1B
En Vigor
2009-06-11
National Aerospace and Defense Contractors Accreditation Program Requirements for Painting and Dry Film Coatings
 
SAE

SAE AS1043G
En Vigor
2017-05-25
SAFETY WIRE HOLES, HEX, FITTING, LOCATION OF, DESIGN STANDARD
 
SAE

SAE AMS7270M
En Vigor
2022-03-09
Rubber: Acrylonitrile-Butadiene (NBR) Fuel Resistant 65 to 75 Type A Hardness for Seals in Fuel
 
SAE

SAE AMS7469B
En Vigor
1980-04-15
BOLTS AND SCREWS, NICKEL ALLOY, CORROSION AND HEAT RESISTANT Upset Headed, Heat Treated, Roll Threaded 2050°F (1120°C) Solution and 1650°F (900°C) Precipitation Heat Treatment
 
SAE

SAE AS150501B
En Vigor
2012-04-11
STUD, STEPPED. 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A
 
SAE

SAE AMS4190D
En Vigor
2011-08-10
WELDING WIRE, ALUMINUM ALLOY 5.2Si (4043)
 
SAE

SAE AS20708/2B
En Vigor
2016-06-09
Synchro, Control Transmitter, Type 11CX4E
 
SAE

SAE AMS7454H
En Vigor
1990-10-01
Bolts and Screws Steel, Low-Alloy, Heat Resistant, Normalized and Tempered, Roll Threaded 135,000 Psi Tensile Strength
 
SAE

SAE AS21439A
En Vigor
2005-07-11
BEARING, ROLLER, NEEDLE, DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, SEALED, TYPE VI, INCH
 
SAE

SAE AMS6444H
En Vigor
1995-11-01
STEEL BARS, FORGINGS, AND TUBING 1.45Cr (0.98 - 1.10C (SAE 52100) Premium Aircraft-Quality, Consumable Electrode Vacuum Melted
 
SAE

SAE AMSC83873A
En Vigor
2010-12-13
Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (AGE)
 
SAE

SAE AMS7274D
En Vigor
1962-11-01
RINGS, SEALING, SYNTHETIC RUBBER Oil Resistant (65 - 75)
 
SAE

SAE AMSDTL22499B
En Vigor
2018-05-07
Shim Stock, Laminated
 
SAE

SAE AMS5654D
En Vigor
1994-04-01
STEEL BARS, WIRE, FORGINGS, TUBING, AND RINGS, CORROSION AND HEAT RESISTANT 18Cr - 11Ni - 0.60(Cb + Ta) (SAE 30347) Consumable Electrode Melted Solution Heat Treated
 
SAE

SAE AMS5641D
En Vigor
1981-10-01
STEEL BARS AND FORGINGS, CORROSION RESISTANT 18.5Cr - 10Ni (SAE 30303Se) Free-Machining; Swaging or Upsetting Solution Heat Treated
 
SAE

SAE AS6047D
En Vigor
2021-08-03
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE
 
SAE

SAE AS595E
En Vigor
2022-11-02
General Requirements for the Design and Testing of Civil Type Pressure Compensated, Variable Delivery Hydraulic Pumps
 
SAE

SAE AS269F
En Vigor
1968-02-15
IDENTIFICATION OF MATERIAL FOR AN, MS, AND AS ENGINE AND PROPELLER STANDARD UTILITY PARTS AND ALSO FOR COMPANY PARTS
 
SAE

SAE AMS6441E
En Vigor
1972-11-15
STEEL TUBING, MECHANICAL 1.45Cr (0.98 - 1.10C) (SAE 52100) Bearing Quality
 
SAE

SAE AMS5794A
En Vigor
1951-06-01
ALLOY WIRE, CORROSION AND HEAT RESISTANT Iron Base - 20Cr - 20Ni - 20Co - 3Mo - 2W - 1(Cb+Ta)
 
SAE

SAE AS1182C
En Vigor
2012-10-03
Standard Stock Removal Allowance Aircraft-Quality and Premium Aircraft-Quality Steel Bars and Mechanical Tubing
 
SAE

SAE AMS5712C
En Vigor
1977-01-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated
 
SAE

SAE AMS5588D
En Vigor
1989-07-01
ALLOY TUBING, WELDED AND DRAWN, CORROSION AND HEAT RESISTANT 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
 
SAE

SAE AS82C
En Vigor
2018-01-29
Screw Thread Form, American National, Modified (National Round - NR)
 
SAE

SAE AS139C
En Vigor
1998-06-01
HOSE ASSEMBLY, METAL - MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 45°
 
SAE

SAE AMS5660K
En Vigor
2008-01-03
Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
 
SAE

SAE AS27488A
En Vigor
2009-03-18
Plug, End Seal, Electrical Connector
 
SAE

SAE AMS5575F
En Vigor
1958-01-01
STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 18Cr - 11Ni - (Cb+Ta) (SAE 30347)
 
SAE

SAE AS1913C
En Vigor
2015-01-22
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 PSI, LIGHTWEIGHT, BEAM SEAL, 45° TO 90°
 
SAE

SAE AS85049/63C
En Vigor
2011-02-08
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
 
SAE

SAE AMS5903C
En Vigor
2018-08-17
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
 
SAE

SAE AMS5685D
En Vigor
1968-05-01
STEEL WIRE, CORROSION RESISTANT 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated
 
SAE

SAE AS1895/4D
En Vigor
2015-01-20
COUPLING, V-RETAINER, SINGLE LATCH, TYPE II LOW PROFILE
 
SAE

SAE ARP1281B
En Vigor
1993-05-01
ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
 
SAE

SAE AMS4281B
En Vigor
1954-11-01
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 5Si - 1.2Cu - 0.5Mg (355-T6) Solution and Precipitation Treated
 
SAE

SAE AMS7272A
En Vigor
1962-01-01
RINGS, SEALING, SYNTHETIC RUBBER Synthetic Lubricant Resistant (65 - 75) Buna-N Type
 
SAE

SAE AS130A
En Vigor
2013-01-02
TUBE BENDING RADIUS
 
SAE

SAE AS21431C
En Vigor
2019-06-06
BEARING, ROLLER, SELF-ALIGNING. SINGLE ROW, ANTI-FRICTION, SEALED, -65 TO 350 °F, TYPE I
 
SAE

SAE ARP5265
En Vigor
2007-08-09
Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage
 
SAE

SAE AMS5794G
En Vigor
2025-10-03
Iron Alloy, Corrosion- and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N (N-155), Annealed
 
SAE

SAE ARP823A
En Vigor
1966-09-01
MINIMIZING STRESS CORROSION CRACKING IN WROUGHT HEAT TREATABLE ALUMINUM ALLOY PRODUCTS
 
SAE

SAE AMS5648
En Vigor
1996-05-01
STEEL, CORROSION AND HEAT RESISTANT 17Cr - 12Ni - 2.5Mo
 
SAE

SAE ARP5297C
En Vigor
2023-03-08
Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications
 
SAE

SAE AMS4282D
En Vigor
1954-11-01
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 4.5Cu - 2.5Si (B195-T6) Solution and Precipitation Treated
 
SAE

SAE AS22759/22A
En Vigor
2020-09-18
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, EXTRUDED TFE, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600 VOLT, ROHS
 
SAE

SAE AMS6490G
En Vigor
2010-04-19
Steel Bars, Forgings, and Tubing 4.0Cr – 4.2Mo – 1.0V (0.77 – 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted
 
SAE

SAE AMS5781C
En Vigor
1995-05-01
STEEL WELDING ELECTRODES, COVERED, CORROSION AND MODERATE HEAT RESISTANT 15.5Cr - 4.5Ni - 2.9Mo - 0.10N
 
SAE

SAE AMS7473E
En Vigor
1991-01-01
BOLTS AND SCREWS, CARBON STEELS, ALLOY STEELS OR CORROSION AND HEAT RESISTANT STEELS OR ALLOYS Roll Threaded
 
SAE

SAE AS1130B
En Vigor
1977-06-01
AIR-LAND DEMOUNTABLE CARGO PALLETS
 
SAE

SAE AS2294-8
En Vigor
1943-02-12
AS2294 Spring Clips
 
SAE

SAE AMS5703D
En Vigor
2012-02-09
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
 
SAE

SAE AMS5611E
En Vigor
2000-10-01
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled, Consumable Electrode Melted
 
SAE

SAE AS3321D
En Vigor
2010-06-02
STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .3125-18UNJC X .3125-24UNJF
 
SAE

SAE AMS5585B
En Vigor
1978-01-01
ALLOY TUBING, WELDED, CORROSION AND HEAT RESISTANT 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0(Cb+Ta) - 0.15N
 
SAE

SAE AMS5614D
En Vigor
1995-02-01
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, AND FORGINGS 12Cr - 0.50Mo Annealed
 
SAE

SAE AMSDTL23053/14A
En Vigor
2012-08-31
Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid
 
SAE

SAE AS116D
En Vigor
2000-07-01
HOSE ASSEMBLY, PTFE, CRES BRAID, 3000 PSIG, 400 °F, STRAIGHT TO 45° FLARELESS, LIGHTWEIGHT
 
SAE

SAE ARP4493A
En Vigor
2013-01-21
Aerospace - Direct Drive Servovalves
 
SAE

SAE AMS6370R
En Vigor
2020-07-07
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)