AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE J2836/3_202402
En Vigor
2024-02-16
Use Cases for Plug-In Vehicle Communication as a Distributed Energy Resource
 
SAE

SAE AMS5541G
En Vigor
2013-05-06
Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 73Ni - 15.5Cr - 2.4Ti - 0.7Al - 7.0Fe Annealed
 
SAE

SAE AMS4097
En Vigor
2002-12-16
Aluminum Alloy, Sheet and Plate 4.5 Cu - 1.5 Mg - 0.60 Mn (2024-T36) Width 48 In. and Under
 
SAE

SAE J2349_200203
En Vigor
2002-03-06
Electric Windshield Wiper Switch—Trucks, Buses, and Multipurpose Vehicles
 
SAE

SAE J1789_202106
En Vigor
2021-06-10
Self-Propelled Sweepers and Scrubbers Braking Performance
 
SAE

SAE J1939/75_200706
En Vigor
2007-06-21
Application Layer—Generator Sets and Industrial
 
SAE

SAE AS5240A
En Vigor
2009-04-24
FITTING, ELBOW, 90°, BULKHEAD, FLARELESS TO FLARED
 
SAE

SAE J823_199106
En Vigor
1991-06-01
FLASHER TEST
 
SAE

SAE J379_201702
En Vigor
2017-02-02
Gogan Hardness of Brake Lining
 
SAE

SAE J2228_200104
En Vigor
2001-04-27
Kingpin Wear Limits—Commercial Trailers and Semitrailers
 
SAE

SAE AS85049/21C
En Vigor
2016-09-12
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
 
SAE

SAE AMS3970/4A
En Vigor
2016-12-06
Carbon Fiber Fabric Repair Prepreg, 120 °C (250 °F) Vacuum Curing Part 4 - Purchasing Specification for Film Adhesive
 
SAE

SAE J1754/2_200603
En Vigor
2006-03-03
Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced—Part 2—Ordering Information
 
SAE

SAE J537_198606
En Vigor
1986-06-01
STORAGE BATTERIES
 
SAE

SAE J517_202007
En Vigor
2020-07-17
Hydraulic Hose
 
SAE

SAE AS85485/9A
En Vigor
2016-08-19
CABLE, ELECTRIC, FILTER LINE, SMALL DIAMETER COMPONENT WIRE, TIN-COATED COPPER CONDUCTOR, RADIO FREQUENCY, ABSORPTIVE, 150 °C, 600-VOLT
 
SAE

SAE AMS4146G
En Vigor
2014-05-19
Aluminum Alloy Forgings and Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) Solution Heat Treated and Naturally Aged
 
SAE

SAE J381_202006
En Vigor
2020-06-05
Windshield Defrosting Systems Test Procedure and Performance Requirements - Trucks, Buses, and Multipurpose Vehicles
 
SAE

SAE AIR4246B
En Vigor
2002-04-19
Contaminants for Aircraft Turbine Engine Fuel System Component Testing
 
SAE

SAE AS4132C
En Vigor
2019-07-29
ELBOW, 90°, BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
 
SAE

SAE AMS3842B
En Vigor
1984-10-01
POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced
 
SAE

SAE MA2036A
En Vigor
2015-04-24
CAP ASSEMBLY, PRESSURE SEAL, FLARELESS TUBE, METRIC
 
SAE

SAE J517_200811
En Vigor
2008-11-25
Hydraulic Hose
 
SAE

SAE USCAR12-5
En Vigor
2017-08-17
ELECTRICAL CONNECTOR DESIGN CRITERIA
 
SAE

SAE AS85049/44A
En Vigor
2011-11-04
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-C-83733 CONNECTORS)
 
SAE

SAE J2534/2_201901
En Vigor
2019-01-16
Optional Pass-Thru Features
 
SAE

SAE AMS3899/1B
En Vigor
1994-04-01
CARBON FIBER TAPE AND SHEET Polysulfone Resin Impregnated C PS 172 (1170) Tensile, 16 (110) Modulus, 120 (248)
 
SAE

SAE J345_201802
En Vigor
2018-02-15
Wet or Dry Pavement Passenger Car Tire Peak and Locked Wheel Braking Traction
 
SAE

SAE J866_201903
En Vigor
2019-03-11
Friction Coefficient Identification and Environmental Marking System for Brake Linings
 
SAE

SAE AS4832A
En Vigor
2019-06-17
Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals
 
SAE

SAE J376_198002
En Vigor
1980-02-01
LOAD INDICATING DEVICES IN LIFTING CRANE SERVICE
 
SAE

SAE AS5193A
En Vigor
2015-04-22
FITTING, CROSS, INTERNAL STRAIGHT THREAD PORT
 
SAE

SAE J304_198101
En Vigor
1981-01-01
ENGINE OIL TESTS
 
SAE

SAE J759C_197501
En Vigor
1975-01-01
LIGHTING IDENTIFICATION CODE
 
SAE

SAE J1119_198812
En Vigor
1988-12-01
STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
 
SAE

SAE J935_198107
En Vigor
1981-07-01
HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
 
SAE

SAE AMS3570F
En Vigor
2011-11-07
Foam, Flexible Polyurethane Open Cell, Medium Flexibility
 
SAE

SAE AMS4087E
En Vigor
1978-10-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 4.4Cu - 1.5Mg - 0.60Mn (2024-0)
 
SAE

SAE J313_200210
En Vigor
2002-10-31
Diesel Fuels
 
SAE

SAE AS9501A
En Vigor
2007-06-27
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
 
SAE

SAE AMS3797/5B
En Vigor
1994-03-01
WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1 (25) Wide, 5000 (22,241) Breaking Strength
 
SAE

SAE J1205_197808
En Vigor
1978-08-01
PERFORMANCE REQUIREMENTS FOR SNAP-IN TUBELESS TIRE VALVES
 
SAE

SAE J384_202207
En Vigor
2022-07-08
Motor Vehicle Seat Belt Anchorages - Test Procedure
 
SAE

SAE AS85049/24E
En Vigor
2026-02-11
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
 
SAE

SAE J1264_198610
En Vigor
1986-10-01
JOINT RCCC/SAE FUEL CONSUMPTION TEST PROCEDURE (SHORT TERM IN-SERVICE VEHICLE) TYPE 1
 
SAE

SAE AS4230C
En Vigor
2015-04-20
FITTING, ELBOW, 45°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
 
SAE

SAE J2606_201709
En Vigor
2017-09-19
Drain and Fill Plug for use on Engines, Transmissions, and Axles
 
SAE

SAE J189_199801
En Vigor
1998-01-01
Power Steering Return Hose—Low Pressure
 
SAE

SAE AS524A
En Vigor
2001-10-01
Flange Accessory 6.500 Pilot Diameter - QAD
 
SAE

SAE J538_198308
En Vigor
1983-08-01
GROUNDING OF STORAGE BATTERIES
 
SAE

SAE AS9525A
En Vigor
2006-05-02
BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .6250-18 UNJF-3A
 
SAE

SAE TS24-9
En Vigor
2024-09-03
TS24 MANUFACTURING SPECIFICATION FOR BOLTS
 
SAE

SAE J1574/1_200505
En Vigor
2005-05-09
Measurement of Vehicle and Suspension Parameters for Directional Control Studies
 
SAE

SAE AMS3196C
En Vigor
1977-07-15
SILICONE RUBBER SPONGE Closed Cell, Firm
 
SAE

SAE AS5192E
En Vigor
2021-01-27
FITTING, TEE, INTERNAL STRAIGHT THREAD PORT
 
SAE

SAE MAM2602B
En Vigor
2003-04-24
Pressure Testing, 170 Kpa
 
SAE

SAE AS85049/114B_A2
En Vigor
2010-07-01
Connector Accessories, Electrical Backshell, 90°, Self-Locking and Non-Self Locking, Pre-Attached Shield Termination (RFI/EMI), Boot Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
 
SAE

SAE J751D_197701
En Vigor
1977-01-01
OFF-HIGHWAY TIRE AND RIM CLASSIFICATION
 
SAE

SAE AMS3632B
En Vigor
1967-11-01
PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat Shrinkable 2 to 1 Shrink Ratio
 
SAE

SAE J1770_201011
En Vigor
2010-11-05
Automotive Refrigerant Recovery/Recycling Equipment Intended for Use With Both R12 and R134a