AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS7707A
En Vigor
1987-07-01
IRON, COMMERCIALLY PURE Hot Rolled, Unannealed
SAE

SAE AMS5503C
En Vigor
1988-10-01
STEEL SHEET, STRIP, AND PLATE, CORROSION RESISTANT 17Cr (SAE 51430) Annealed
SAE

SAE AMSPRF46194B
En Vigor
2016-09-01
Foam, Rigid, Structural, Closed Cell
SAE

SAE AMS4987E
En Vigor
2015-01-15
Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength
SAE

SAE AMS5529L
En Vigor
2024-06-26
Steel, Corrosion-Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al (Alloy 17-7) Solution Heat Treated and Cold Rolled, Precipitation Hardenable
SAE

SAE ARP5283B
En Vigor
2022-09-30
Nose Gear Towbarless Tow Vehicle Basic Test Requirements
SAE

SAE AMS4988D
En Vigor
2018-08-08
Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated
SAE

SAE AMS5525E
En Vigor
1985-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800°F (980°C) Solution Heat Treated
SAE

SAE AMS2675C
En Vigor
1968-05-01
NICKEL ALLOY BRAZING
SAE

SAE AMS2475H
En Vigor
2019-02-13
Protective Treatments Magnesium Alloys
SAE

SAE AMS2759/3C
En Vigor
2000-08-01
Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts
SAE

SAE AMS2315G
En Vigor
2013-02-11
Determination of Delta Ferrite Content
SAE

SAE ARP378D
En Vigor
2017-05-04
Passenger Reading Lights
SAE

SAE AMS5656A
En Vigor
1978-04-01
STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 9.0Mn - 20Cr - 6.5Ni - 0.27N
SAE

SAE ARP6400
En Vigor
2021-06-07
Recommended Practice for Processing and Handling Wire and Cable with Silver Plated Conductors and Shields
SAE

SAE AMS5587B
En Vigor
1968-11-01
ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT Nickel Base - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe
SAE

SAE ARP4767A
En Vigor
2007-07-23
Automatic Test Equipment, Relays Fully Rated 25 Amperes or Greater
SAE

SAE ARP5535
En Vigor
2009-06-09
Observers for Laser Safety in the Navigable Airspace
SAE

SAE ARP4084A
En Vigor
2006-06-05
Aircraft Ground Service Connections Locations and Type
SAE

SAE AMS5643D
En Vigor
1957-09-01
STEEL, CORROSION RESISTANT 17Cr - 4Ni - 4Cu
SAE

SAE AMS2816V
En Vigor
2005-10-11
Identification Welding Wire, Tab Marking Method
SAE

SAE AMS3327C
En Vigor
2001-04-09
Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80
SAE

SAE AMS3272/2B
En Vigor
2011-08-25
Cloth, Nylon, Polyurethane Coated Plain Weave, 4.0 ounces/square yard (135 g/m2)
SAE

SAE AMS2808A
En Vigor
1952-06-01
IDENTIFICATION Forgings
SAE

SAE ARP484A
En Vigor
1994-07-01
SPARK IGNITER GAP TYPES
SAE

SAE AMS5592D
En Vigor
1996-04-01
IRON-NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated
SAE

SAE AMS5605H
En Vigor
2024-09-10
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted, 1800 °F (982 °C) Solution Heat Treated (Alloy 706)
SAE

SAE AMS5873D
En Vigor
2002-08-21
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Melted, Solution Heat Treated
SAE

SAE AMS5685G
En Vigor
1981-01-15
STEEL SAFETY WIRE, CORROSION RESISTANT 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated
SAE

SAE AMS5859D
En Vigor
2012-10-11
Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
SAE

SAE AMS5838B
En Vigor
1988-04-01
ALLOY WELDING, WIRE, CORROSION AND HEAT RESISTANT 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La
SAE

SAE AMS6407B
En Vigor
1966-09-30
STEEL BARS, FORGINGS, AND TUBING 1.2Cr - 2.05Ni - 0.45Mo (0.27 - 0.33C)
SAE

SAE AMS5734A
En Vigor
1966-03-01
STEEL, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.1Ti - 0.3V Consumable Electrode Melted 1650 F (899 C) Annealed
SAE

SAE AMS3274G
En Vigor
2005-05-31
Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant
SAE

SAE AMS3252E
En Vigor
1977-07-01
SYNTHETIC RUBBER AND CORK COMPOSITION General Purpose Firm
SAE

SAE AMS3681C
En Vigor
2005-05-31
Adhesive, Electrically Conductive Silver-Filled Epoxy Resin
SAE

SAE AMS3655D
En Vigor
2018-11-20
Tubing, Electrical Insulation Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE

SAE AMS3222A
En Vigor
1944-03-01
SYNTHETIC RUBBER Hot Oil Resistant - High Swell (45-55)
SAE

SAE AMS7259C
En Vigor
1997-10-01
Rings, Sealing, Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95
SAE

SAE AMS5841C
En Vigor
1994-07-01
ALLOY, CORROSION AND HEAT RESISTANT, BARS 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
SAE

SAE AMS6461F
En Vigor
1979-10-15
STEEL WIRE, WELDING 0.95Cr - 0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted
SAE

SAE AMS6411C
En Vigor
1984-10-01
STEEL BARS, FORGINGS, AND TUBING 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable Electrode Remelted
SAE

SAE AMS7445D
En Vigor
2012-02-09
Balls, Steel, Corrosion-Resistant 17Cr Annealed
SAE

SAE AMS3310
En Vigor
2007-06-08
Rubber, Silicone Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White
SAE

SAE AMS3571/9A
En Vigor
1984-07-01
RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 75 Durometer "D"
SAE

SAE AMS3226C
En Vigor
1953-06-01
SYNTHETIC RUBBER Hot Oil and Coolant Resistant, Low Swell (45-55)
SAE

SAE AMS3130B
En Vigor
1954-11-01
PAINT VEHICLE Glyceryl Phthalate
SAE

SAE AMS3284D
En Vigor
2024-05-28
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE

SAE AMS7278D
En Vigor
1966-09-01
RINGS, SEALING, SYNTHETIC RUBBER High Temperature Fluid Resistant, Fluorocarbon Type 70 - 80
SAE

SAE AMS4903A
En Vigor
2007-06-13
Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat Treated
SAE

SAE AMSDTL23053/18A
En Vigor
2012-09-05
Insulation Sleeving, Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked
SAE

SAE AMS5022P
En Vigor
2020-04-14
Steel, Bars, Forgings, and Tubing, Free-Cutting 0.14 - 0.20C (SAE 1117)
SAE

SAE AMS7251A
En Vigor
1969-11-01
NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength, Prevailing-Torque, All Metal 1200 F (649 C) Use, Unified "J" (MIL-S-8879) Thread Form
SAE

SAE AMS5120P
En Vigor
2023-03-20
Steel Strip 0.68 - 0.80C (SAE 1074)
SAE

SAE AMS7705A
En Vigor
1977-01-01
MAGNETIC ALLOY BARS AND FORGINGS Nickel-Iron Alloy
SAE

SAE AMS5396A
En Vigor
1977-01-15
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 61.5Ni - 28Mo - 5.5Fe - 0.40V
SAE

SAE AMS7910B
En Vigor
2006-07-17
Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered
SAE

SAE AMS4976C
En Vigor
1985-07-01
TITANIUM ALLOY FORGINGS 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated
SAE

SAE AMS2252C
En Vigor
1983-01-01
TOLERANCES Low-Alloy Steel Sheet, Strip, and Plate
SAE

SAE AMS2469F
En Vigor
1998-11-01
Hard Anodic Coating Treatment of Aluminum and Aluminum Alloys Processing and Performance Requirements