Normas SAE
Filtrar:
SAE
SAE
SAE AMS4103
En Vigor
2002-12-16
Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T36) Width 30
In. and Under
SAE
SAE
SAE
SAE AMS2671C
En Vigor
1965-02-01
COPPER FURNACE BRAZING Corrosion and Heat Resistant Steels and Alloys
SAE
SAE AGS3050-3
En Vigor
1973-11-01
AGS3050-069 Rose Self Aligning Spherical Bearing Rod Ends. Unified
Female Series
SAE
SAE
SAE AMS3858C
En Vigor
1985-10-01
ASBESTOS FELTING, "B" STAGE PHENOLIC RESIN IMPREGNATED Low
Pressure Molding
SAE
SAE AMS5526J
En Vigor
2007-02-02
Steel Sheet, Strip, and Plate, Corrosion and Heat Resistant, 19.5Cr -
9.5Ni - 1.4Mo - 1.4W - 0.42(Cb+Ta) - 0.22Ti, Solution Heat Treated
SAE
SAE AMS4453C
En Vigor
1994-11-01
MAGNESIUM ALLOY, INVESTMENT CASTINGS 9.0Al - 2.0Zn (AZ92A-T6) Solution
and Precipitation Heat Treated
SAE
SAE AMS1525C
En Vigor
1992-10-01
CLEANER FOR AIRCRAFT EXTERIOR METALLIC SURFACES Wipe Solvent, Cold Operations
SAE
SAE AMS5540B
En Vigor
1947-07-01
ALLOY AND SHEET AND STRIP, CORROSION AND HEAT RESISTANT Nickel Base -
15Cr - 7Fe
SAE
SAE AMS4419C
En Vigor
2006-06-21
Magnesium Alloy Castings, Sand, 2.5Ag - 1.1Th - 1.0Di - 0.70Zr
(QH21-T6), Solution and Precipitation Heat Treated
SAE
SAE
SAE
SAE
SAE
SAE AMS4243D
En Vigor
2024-12-18
Aluminum Alloy, Alclad Sheet, 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (Alclad
7050-T76), Solution Heat Treated and Overaged
SAE
SAE AMS3383A
En Vigor
2011-09-23
Polytetrafluoroethylene (PTFE) - Fluorosilicone (FVMQ) Rubber High
Temperature Fuel and Oil Resistant 75 - 85
SAE
SAE AMS4445B
En Vigor
1965-02-15
MAGNESIUM ALLOY CASTINGS, SAND 3.3Th - 0.8Zr (HK31A-T6) Solution and
Precipitation Treated
SAE
SAE AMS3670/3C
En Vigor
2021-05-19
Bar, Rod, and Shapes Produced from 12% Graphite - 3%
Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material
SAE
SAE AMS4786J
En Vigor
2015-12-03
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au
- 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
SAE
SAE
SAE
SAE AIR1059C
En Vigor
2010-10-14
Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking
SAE
SAE
SAE
SAE
SAE
SAE
SAE AMS4169F
En Vigor
1979-10-01
ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511)
Stress-Relief Stretched and Straightened
SAE
SAE AMS4389F
En Vigor
1992-01-01
MAGNESIUM ALLOY EXTRUSIONS 3.0Th - 1.5Mn (HM31A-T5) Precipitation Heat Treated
SAE
SAE AMS4919K
En Vigor
2024-04-01
Titanium Alloy Sheet, Strip, and Plate 6Al - 2Sn - 4Zr - 2Mo - 0.08Si
Duplex Annealed
SAE
SAE
SAE
SAE AMS5384F
En Vigor
2017-04-04
Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr -
18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast,
Solution and Precipitation Heat Treated
SAE
SAE AMS4050F
En Vigor
1998-11-01
Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451)
Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE
SAE
SAE AMS4163C
En Vigor
1998-03-01
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti
(2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE
SAE AGS3805-2
En Vigor
2004-12-01
AGS3805-807 Caps-Protection, and Sealing for Inhibited Units, Unified Threads
SAE
SAE AMS3281G
En Vigor
2022-06-13
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel
Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F
(182 °C)
SAE
SAE AMS3858B
En Vigor
1984-10-01
ASBESTOS FELTING, "B" STAGE PHENOLIC RESIN IMPREGNATED Low
Pressure Molding
SAE
SAE
SAE AIR4061
En Vigor
1990-01-01
GUIDELINES FOR INTEGRATION OF ENGINE MONITORING FUNCTIONS WITH ON-BOARD
AIRCRAFT SYSTEMS
SAE
SAE AIR1664A
En Vigor
2025-07-28
Aircraft Flexible Tanks General Design and Installation Recommendations
SAE
SAE AMS4761A
En Vigor
2009-06-10
Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to
1330 °F (649 to 721 °C) Solidus-Liquidus Range
SAE
SAE
SAE AMS4408B
En Vigor
2024-05-17
Aluminum Alloy, Plate (7140-T7651) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr
Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE
SAE
SAE AMS4169E
En Vigor
1978-07-01
ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511)
Stress-Relief Stretched and Straightened
SAE
SAE AMS3276C
En Vigor
1999-01-01
Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent
Use To 360 °F (182 °C)
SAE
SAE
SAE
SAE
SAE AMS3200A
En Vigor
1943-10-01
SYNTHETIC RUBBER Hydraulic Fluid (Petroleum Base) Resistant (55-65)
SAE
SAE AMS5521E
En Vigor
1982-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 25Cr - 20Ni
(SAE 30310) Deep Drawing and Spinning Solution Heat Treated
SAE
SAE AMS4532F
En Vigor
2005-02-11
Copper-Beryllium Alloy, Sheet and Strip 98Cu - 1.9Be Half Hard (TD02)
SAE
