Normas SAE
Filtrar:
SAE
SAE
SAE AMS3787/2A
En Vigor
2001-01-01
Thread, Para-Aramid Intermediate Modulus 6700 yards per pound (13,507
m/kg), 25 pounds force (111 N) Breaking Strength
SAE
SAE AMS4120G
En Vigor
1967-11-01
ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 4.4Cu - 1.5Mg -
0.60Mn (2024-T4)
SAE
SAE
SAE AMS2304C
En Vigor
2020-05-19
Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure
SAE
SAE
SAE AMS3573A
En Vigor
2003-05-01
Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid
Low-Temperature Resistant, 80 to 90
SAE
SAE AMS3270K
En Vigor
2011-08-25
Chloroprene (CR) Rubber Sheet, Cotton Fabric Reinforced Weather Resistant
SAE
SAE
SAE
SAE AMS4114C
En Vigor
1966-03-01
ALUMINUM ALLOY BARS, ROLLED, DRAWN, OR COLD FINISHED 2.5Mg - 0.25Cr (5052-F)
SAE
SAE
SAE AMS3583D
En Vigor
1995-10-01
Plastic Tubing, Electrical Insulation, Crosslinked Polyvinyl Chloride,
Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio
SAE
SAE AMS4763B
En Vigor
2015-12-04
Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to
1205 °F (618 to 652 °C) Solidus-Liquidus Range
SAE
SAE
SAE AMS3901/10B
En Vigor
1998-09-01
Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9
Tensile Strength, 16.5 (114)/945 Tensile Modulus 1140 (1270 d tex)
Denier, 1.2% Finish
SAE
SAE AMS3657B
En Vigor
2011-08-09
POLYTETRAFLUOROETHYLENE EXTRUSIONS Premium Strength, As Sintered,
Radiographically Inspected
SAE
SAE AIR5992
En Vigor
2023-04-26
Descriptions of Systems Integration Test Rigs (Iron Birds) for Aerospace Applications
SAE
SAE AMS3348C
En Vigor
2007-06-08
Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High
Resiliency 25 - 35
SAE
SAE
SAE
SAE AGS1656-10
En Vigor
1963-05-07
AGS1656 Sleeves, Bonding, Metal Braided Cable, L.T. Type 2, Oval Outer
SAE
SAE AMS2300L
En Vigor
2015-05-21
Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
SAE
SAE
SAE AMS4217B
En Vigor
1951-12-01
ALUMINUM ALLOY CASTINGS, SAND 7Si - 0.3Mg (356-T6) Solution and
Precipitation Treated
SAE
SAE AMS2487A
En Vigor
2011-10-03
Anodic Treatment of Titanium and Titanium Alloys Solution pH 12.4 Maximum
SAE
SAE
SAE
SAE AMS4085G
En Vigor
2024-06-26
Aluminum Alloy Sheet, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761),
Solution Heat Treated and Overaged
SAE
SAE AMS3588E
En Vigor
2011-09-01
Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very
Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio
SAE
SAE
SAE AMS4296A
En Vigor
2003-08-31
Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad
2524-T3) Solution Heat Treated and Cold Worked
SAE
SAE
SAE AMS3902B
En Vigor
2011-08-09
CLOTH, ORGANIC FIBER, (PARA-ARAMID) HIGH MODULUS For Structural Composites
SAE
SAE
SAE AMS3568/2B
En Vigor
2011-08-25
Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic
Foot (240 kg/m3) Density
SAE
SAE AIR1168/4B
En Vigor
2016-08-29
SAE Aerospace Applied Thermodynamics Manual Ice, Rain, Fog, and Frost Protection
SAE
SAE
SAE AMS3654C
En Vigor
1999-01-01
Tubing, Electrical Insulation Light Wall, Extruded
Polytetrafluoroethylene (PTFE)
SAE
SAE AMS4117F
En Vigor
1989-07-01
ALUMINUM ALLOY BARS, RODS, AND HIRE, ROLLED OR COLD FINISHED AND FLASH
WELDED RINGS 1.0Mg - 0.60Si - 0.28CU - 0.20Cr (6061; -T6, -T651)
Solution and Precipitation Heat Treated
SAE
SAE AMS2300G
En Vigor
1995-05-01
PREMIUM AIRCRAFT-QUALITY STEEL CLEANLINESS Magnetic Particle Inspection Procedure
SAE
SAE AMS3023A
En Vigor
2013-11-26
Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
SAE
SAE AMS4782A
En Vigor
1978-07-15
BRAZING FILLER METAL, NICKEL 71Ni - 10Si - 19Cr 1975° - 2075°F (1080° -
1135°C) Solidus-Liquidus Range
SAE
SAE AIR1077
En Vigor
1992-07-01
METALLIC SEAL RINGS FOR HIGH TEMPERATURE RECIPROCATING HYDRAULIC SERVICE
SAE
SAE
SAE AMS4143E
En Vigor
2012-09-26
Aluminum Alloy Forgings and Rolled or Forged Rings 6.3Cu - 0.30Mn -
0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and Precipitation Heat Treated
SAE
SAE
SAE AMS4132C
En Vigor
1985-07-01
ALUMINUM ALLOY FORGINGS 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti
(2618-T61) Solution and Precipitation Heat Treated
SAE
SAE
SAE
SAE AMS2303C
En Vigor
1993-01-01
AIRCRAFT QUALITY STEEL CLEANLINESS Martensitic Corrosion-Resistant
Steels Magnetic Particle Inspection Procedure
SAE
SAE
SAE
SAE
SAE AMS4462B
En Vigor
2025-05-03
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad
2024, -T3 Sheet, -T351 Plate) Solution Heat Treated, Cold Worked and
Naturally Aged
SAE
SAE
SAE AMS3654D
En Vigor
2016-09-06
Tubing, Electrical Insulation Light Wall, Extruded
Polytetrafluoroethylene (PTFE)
SAE
SAE
SAE
SAE AMS4048A
En Vigor
1953-06-01
ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD 5.6Zn - 2.5Mg -
1.6Cu - 0.25Cr (Alc. 75S-0)
