Normas SAE
Filtrar:
SAE
SAE AMS4107H
En Vigor
2023-05-10
Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
SAE
SAE AMS4786E
En Vigor
1999-05-01
Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au
- 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
SAE
SAE AMS4046E
En Vigor
1995-05-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 5.6Zn - 2.5Mg - 1.6Cu -
0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Solution and
Precipitation Heat Treated
SAE
SAE
SAE AIR6172A
En Vigor
2017-03-15
Ice Undercutting Test Method for Runways and Taxiways Deicing/Anti-Icing Chemicals
SAE
SAE AMS2449B
En Vigor
2023-09-05
Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High
Strength Steels
SAE
SAE AMS4340H
En Vigor
2024-05-17
Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511)
Solution Heat Treated, Stress Relieved, Straightened, and Overaged
SAE
SAE AMS3853/2B
En Vigor
1995-10-01
Cord, Aromatic Polyamide, Nonmelting 375 Pounds (1670 N), 230 Foot/Pound
(155 M/Kg)
SAE
SAE AIR818E
En Vigor
2020-02-20
Aircraft Instrument and Instrument System Standards: Wording
Terminology, Phraseology, Environment and Design Standards For
SAE
SAE AIR1813A
En Vigor
2007-11-15
The Coanda/Refraction Concept for Gas Turbine Engine Test Cell Noise Suppression
SAE
SAE AMS3894/8C
En Vigor
2016-11-10
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70000 (483)
Tensile, 36000000 (248) Modulus, 80 (176)
SAE
SAE
SAE AMS4344E
En Vigor
2018-03-04
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511)
Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE
SAE AMS4108A
En Vigor
1977-01-01
ALUMINUM ALLOY HAND FORGINGS 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr
(7050-T73652) Solution Heat Treated, Compression Stress-Relieved, and
Precipitation Heat Treated
SAE
SAE AMS2248B
En Vigor
1975-06-01
CHEMICAL CHECK ANALYSIS LIMITS Wrought Heat and Corrosion Resistant
Steels and Alloys
SAE
SAE
SAE
SAE
SAE AMS4392A
En Vigor
2024-04-09
Magnesium Alloy Welding Wire, 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A)
SAE
SAE AMS3305K
En Vigor
2019-04-05
Elastomer: Silicone Rubber, (VMQ) General Purpose 75 – 85 Durometer Type
‘A’ Hardness
SAE
SAE
SAE AMS3867/5A
En Vigor
2001-04-01
Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)
SAE
SAE AMS4202F
En Vigor
2025-07-09
Aluminum Alloy Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351),
Solution Heat Treated, Stress Relieved by Stretching, and Precipitation
Heat Treated
SAE
SAE AIR1389C
En Vigor
2022-06-27
FAR - Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft
SAE
SAE
SAE AS54381-2
En Vigor
2023-05-26
AS54381-390 Nut, Self Locking, Extended Washer, Double Hexagon - for Use
with Impedance Type Bolts
SAE
SAE AMS4206B
En Vigor
2011-12-19
Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr
Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE AGS3911-2
En Vigor
1974-07-01
AGS3911 Dimensions of Medium Tolerance Tapped Bosses with Unified
Threads for Pipe Coupling Union Adaptors Using Pipe Fitting O Ring
Seals, e.g. AS43003. (Recommended for Use with Pressures up to 2500
lbf/in2. For Pressures above 2500 lbf/in2 AGS 3910 Is Recommended)
SAE
SAE AMS4032C
En Vigor
1946-04-01
Aluminum Alloy, Sheet and Plate Copper Manganese Magnesium (17 S-T)
SAE
SAE
SAE
SAE AMS4339B
En Vigor
2018-02-15
Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg -
0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged
