AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS4712D
En Vigor
1989-10-01
BRASS WIRE 65Cu - 35Zn Annealed (061)
 
SAE

SAE AMS5393C
En Vigor
1966-09-30
ALLOY IRON CASTINGS, SAND, CORROSION AND HEAT RESISTANT 2Cr - 20Ni
 
SAE

SAE AMS4125B
En Vigor
1944-11-01
ALUMINUM ALLOY FORGINGS Silicon Magnesium Chromium (A51S-T)
 
SAE

SAE AMS5582G
En Vigor
2019-01-18
Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi (1069 MPa) Tensile Strength
 
SAE

SAE AMS2753C
En Vigor
2015-06-08
Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath
 
SAE

SAE AIR1168/2A
En Vigor
2011-07-25
Heat and Mass Transfer and Air-Water Mixtures
 
SAE

SAE AMS3638D
En Vigor
1981-10-01
PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio
 
SAE

SAE AMS4395D
En Vigor
1994-04-01
MAGNESIUM ALLOY WELDING WIRE 9.0A1 - 2.0Zn (AZ92A)
 
SAE

SAE AMS4420G
En Vigor
1958-08-15
MAGNESIUM ALLOY CASTINGS, SAND 6Al - 3Zn (AZ63A-F) As Cast
 
SAE

SAE AMS4767B
En Vigor
1978-07-15
BRAZING FILLER METAL, SILVER 92.5Ag - 7.2Cu - 0.22Li 1435° - 1635° F (780° - 890° C) Solidus-Liquidus Range
 
SAE

SAE AMS5592F
En Vigor
2013-08-05
Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated
 
SAE

SAE AMS4224B
En Vigor
2000-10-01
Aluminum Alloy Castings, Sand 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0) Stabilized
 
SAE

SAE AMS3243G
En Vigor
2011-09-23
Chloroprene (CR) Rubber Flame Resistant 55 - 65
 
SAE

SAE AMS3816A
En Vigor
1977-01-01
BRAID, FLAT, NYLON, ELECTRICAL TYING Wax Coated
 
SAE

SAE AMS5817A
En Vigor
1963-01-01
STEEL WIRE, WELDING, CORROSION AND MODERATE HEAT RESISTANT 13Cr - 2Ni - 3W
 
SAE

SAE AMS5635E
En Vigor
2000-12-04
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated
 
SAE

SAE AMS5028F
En Vigor
2019-04-05
Steel, Welding Wire 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC) Vacuum Melted, Environment-Controlled Packaging
 
SAE

SAE AMS4085C
En Vigor
2006-03-17
Aluminum Alloy Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged
 
SAE

SAE AMS3388D
En Vigor
2012-12-11
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, Noncollapsing
 
SAE

SAE AIR4298
En Vigor
2014-10-04
Impulse Test Machine, Sine Wave, Equipment and Operation of
 
SAE

SAE AMS2625B
En Vigor
1982-04-01
PRESSURE TESTING, HYDRAULIC 2500 psig
 
SAE

SAE AGS3410-5
En Vigor
1970-05-22
AGS3410 Union Nut - 5/16" O/D. Pipe - Unified
 
SAE

SAE AMS4036A
En Vigor
1966-03-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.5Cu - 1.5Mg - 0.60Mn (Alclad one side 2024; -T3 Sheet, -T4 Plate)
 
SAE

SAE AMS5082G
En Vigor
2012-04-09
Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved
 
SAE

SAE AMS5507C
En Vigor
1978-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 17Cr - 13Ni - 2.5Mo (SAE 30316L)
 
SAE

SAE AMS3112
En Vigor
1945-10-01
Compound, Zinc Chromate, Sealing (Unthinned) Hot Oil Resisting
 
SAE

SAE AMS4993G
En Vigor
2023-11-10
Titanium Alloy, Blended Powder Compacts, Sintered 6Al - 4V
 
SAE

SAE AMS2425C
En Vigor
1984-10-01
GOLD PLATING For Thermal Control
 
SAE

SAE AMS4210B
En Vigor
1942-12-01
ALUMINUM ALLOY CASTINGS (Sand) 5% Silicon (Aged)
 
SAE

SAE AMS4148B
En Vigor
2011-08-10
ALUMINUM ALLOY DIE FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T66) Solution and Precipitation Heat Treated
 
SAE

SAE AMS4766D
En Vigor
1984-01-01
BRAZING FILLER METAL, SILVER 85Ag - 15Mn 1760°- 1780°F (960° - 970°C) Solidus-Liquidus Range
 
SAE

SAE AMS3867/2A
En Vigor
1984-10-01
BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED Type B5.6-E375 (Type B0.140-E190)
 
SAE

SAE AMS5712B
En Vigor
1966-09-01
ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3Ti - 1.5Al Vacuum Melted, Solution Treated
 
SAE

SAE AMS4179A
En Vigor
1982-07-01
ALUMINUM ALLOY HAND FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73652) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
 
SAE

SAE AMS5614A
En Vigor
1978-10-01
STEEL BARS AND FORGINGS, CORROSION AND MODERATE HEAT RESISTANT 12Cr - 0.50Mo
 
SAE

SAE AMS2241N
En Vigor
2003-09-05
Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire
 
SAE

SAE AMS3228D
En Vigor
1965-02-01
SYNTHETIC RUBBER Hot Oil and Coolant Resistant, Low Swell 65 - 75
 
SAE

SAE AMS5375F
En Vigor
2007-03-07
Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni - 5.0W As Cast
 
SAE

SAE AMS3894/10B
En Vigor
2016-09-13
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 210000 (1448) Tensile, 20000000 (138) Modulus, 175 (347)
 
SAE

SAE AMS4152F
En Vigor
1956-02-01
ALUMINUM ALLOY EXTRUSIONS 4.5Cu - 1.5Mg - 0.6Mn (2024-T4)