Normas SAE
Filtrar:
SAE
SAE
SAE
SAE MAM4248A
En Vigor
2000-11-01
ALUMINUM ALLOY HAND FORGINGS AND ROLLED RINGS 1.0Mg - 0.60Si - 0.28Cu -
0.20Cr (6061-T652) Solution Heat Treated, Stress Relieved by
Compression, and Precipitation Heat Treated
SAE
SAE MA2154/1
En Vigor
2015-04-27
CLAMP, RECTANGULAR, 2 PIECE, CUSHIONED, WITH WEDGES, HYDROCARBON FLUID
RESISTANT, METRIC
SAE
SAE J1045_199406
En Vigor
1994-06-01
INSTRUMENTATION AND TECHNIQUES FOR VEHICLE REFUELING EMISSIONS MEASUREMENT
SAE
SAE
SAE RS313-4
En Vigor
1953-01-23
RS313 6" Constant Speed Unit Pad and Drive 5.400 P.C.D. x
.875" Twin Oilway
SAE
SAE
SAE MA3289A
En Vigor
2006-05-02
BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE
SAE J1143_199106
En Vigor
1991-06-01
TOWED VEHICLE/TOW EQUIPMENT ATTACHMENT TEST PROCEDURE—PASSENGER CARS,
VANS, AND LIGHT DUTY TRUCKS
SAE
SAE J1269_198511
En Vigor
1985-11-01
ROLLING RESISTANCE MEASUREMENT PROCEDURE FOR PASSENGER CAR AND LIGHT
TRUCK TIRES
SAE
SAE J1008_198701
En Vigor
1987-01-01
SOUND MEASUREMENT—SELF-PROPELLED AGRICULTURAL EQUIPMENT—EXTERIOR
SAE
SAE
SAE
SAE J322_201406
En Vigor
2014-06-03
Nonmetallic Trim Materials—Test Method for Determining the Staining
Resistance to Hydrogen Sulfide Gas
SAE
SAE MAM2245A
En Vigor
1994-04-01
TOLERANCES, METRIC Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes
SAE
SAE
SAE AS9588B
En Vigor
2016-12-15
BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286,
130 KSI MIN, .5000-20 UNJF-3A
SAE
SAE MA2150/3A
En Vigor
2021-12-15
CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, METRIC
SAE
SAE
SAE
SAE J356_199602
En Vigor
1996-02-01
WELDED FLASH CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING,
DOUBLE FLARING, AND BEADING
SAE
SAE AS9493B
En Vigor
2018-11-26
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT
STEEL, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A
SAE
SAE TS85-2
En Vigor
2004-12-01
TS85 Technical Specification for Lubricated Nipples, Hydraulic,
Surface-Check Type, Metric
SAE
SAE AS9585C
En Vigor
2017-04-05
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286,
130 KSI MIN, .3125-24 UNJF-3A
SAE
SAE AS8661-4
En Vigor
1973-11-01
AS8661 Self-Locking Nuts, Single, Long, Lug Floating Anchor. C.R. Steel,
125,000 lbf/in2 250°C
SAE
SAE AS8657-4
En Vigor
1973-11-01
AS8657 Self-Locking Nuts, Corner Anchor. C.R. Steel. 125,000lbf/in2 250°C
SAE
SAE
SAE
SAE
SAE
SAE AS9311
En Vigor
2003-10-15
STUD, SHOULDERED AND STEPPED, HEXAGON WRENCHING, DRILLED, STEEL, .250-28
UNF-3A X .3125-24 UNF-3A
SAE
SAE J322_198512
En Vigor
1985-12-01
NONMETALLIC TRIM MATERIALS--TEST METHOD FOR DETERMINING THE STAINING
RESISTANCE TO HYDROGEN SULFIDE GAS
SAE
SAE AS95234/8A
En Vigor
2023-11-15
CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS
SAE
SAE
SAE
SAE
SAE AS9579C
En Vigor
2017-10-18
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK,
SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI
MIN, .5000-20 UNJF-3A
SAE
SAE AS9309B
En Vigor
2014-01-02
STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400,
CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A
SAE
SAE AS9821
En Vigor
2007-06-27
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS 5643,
.500-20 UNJF-3A
