Estamos mejorando nuestra Tienda, Portal de clientes y Aenormas para ofrecerte una mejor experiencia.
Si detectas cualquier incidencia o necesitas ayuda durante el proceso de compra, puedes contactarnos a través del chat o escribirnos a normas@aenor.com.
Nuestro equipo estará encantado de ayudarte.
Normas SAE
Filtrar:
SAE
SAE AMS5391B
En Vigor
1976-01-01
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 73Ni - 13Cr -
4.5Mo - 2.3 (Cb+Ta) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Melted
SAE
SAE
SAE
SAE AMS4050C
En Vigor
1984-10-01
ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050 - T7451)
Solution Heat Treated, Stress Relieved, and Overaged
SAE
SAE AMS5670E
En Vigor
1999-01-01
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings
72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C)
Solution Heat Treated, Precipitation Hardenable
SAE
SAE
SAE AMS4173A
En Vigor
1979-10-01
ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511)
Stress Relief Stretched and Straightened
SAE
SAE
SAE AMS4148E
En Vigor
2011-11-07
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat
Treated
SAE
SAE
SAE
SAE AMS3787/8B
En Vigor
2013-09-11
Thread, Para-Aramid Intermediate Modulus 500 yards per pound (1008
m/kg), 225 pounds force (1001 N) Breaking Strength
SAE
SAE AMS4786B
En Vigor
1984-01-01
BRAZING FILLER METAL, HIGH TEMPERATURE 70Au - 8.0Pd - 22Ni 1845° -
1915°F (1005° - 1045°C) Solidus-Liquidus Range
SAE
SAE AIR4295
En Vigor
2011-11-15
Handbook for the Digital Time Division Command/Response Multiplex Data
Bus Test Plans
SAE
SAE
SAE AMS4144C
En Vigor
1985-07-01
ALUMINUM ALLOY HAND FORGINGS AND RINGS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti (2219-T852) Solution Heat Treated, Stress Relief Compressed, and
Precipitation Heat Treated
SAE
SAE
SAE AMS5512L
En Vigor
2012-10-12
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr -
10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated
SAE
SAE AMS5406B
En Vigor
2007-04-05
Alloy Castings, Investment, Corrosion and Heat Resistant, 63Ni - 8.0Cr -
10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf, Vacuum
Melted, Vacuum Cast, As Cast
SAE
SAE AMS5637J
En Vigor
2018-07-27
Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution
Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile
Strength
SAE
SAE AMS4376H
En Vigor
2018-11-07
Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26) Cold Rolled
and Partially Annealed
SAE
SAE AMS3331D
En Vigor
2024-08-12
Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75
Durometer Type ‘A’ Hardness For Products in Fuel Systems/Lubricating
Oils
SAE
SAE
SAE AIR6037A
En Vigor
2018-11-20
Aircraft Exhaust Nonvolatile Particle Matter Measurement Method
Development
SAE
SAE
SAE AMS4926R
En Vigor
2024-04-01
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758
MPa) Yield Strength
SAE
SAE AMS3894/7C
En Vigor
2016-09-14
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621)
Tensile, 40000000 (276) Modulus, 80 (176)
SAE
SAE
SAE
SAE AMS4855E
En Vigor
2000-09-01
LEADED RED BRASS, SAND AND CENTRIFUGAL CASTINGS 85Cu - 5.0Sn - 5.0Pb -
5.0Zn As Cast
SAE
SAE
SAE
SAE AMS4333D
En Vigor
2015-07-13
Aluminum Alloy, Die Forgings 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452)
Solution Heat Treated, Compression Stress-Relieved, and Overaged
SAE
SAE AMS3901/9C
En Vigor
2015-04-30
Yarn, Organic Fiber (Para-Aramid), High Modulus 380 Denier (420 d tex),
1.2% Finish
SAE
SAE
SAE
SAE
SAE AMS4915E
En Vigor
1977-07-15
TITANIUM ALLOY SHEET, STRIP, AND PLATE 8Al - 1V - 1Mo Single Annealed
SAE
SAE AMS3797/3C
En Vigor
2015-04-14
Webbing, Nylon, Integral Locking Slots 1 (25) Wide, 3000 (13,345)
Breaking Strength
SAE
SAE AMS4026J
En Vigor
2011-08-09
ALUMINUM ALLOY SHEET AND PLATE 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061;
-T4 Sheet, -T451 Plate) Solution Heat Treated and Naturally Aged
