Normas SAE
Filtrar:
SAE
SAE MA2101
En Vigor
2002-03-07
HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO
STRAIGHT FITTING ENDS, METRIC
SAE
SAE J2802_201506
En Vigor
2015-06-04
Blind Spot Monitoring System (BSMS): Operating Characteristics and User Interface
SAE
SAE
SAE
SAE AS81935/9A
En Vigor
2011-06-20
BEARING, PLAIN, ROD END, SELF-ALIGNING, SELF-LUBRICATING, NARROW,
INTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) −65 TO +325 °F
SAE
SAE AS1735D
En Vigor
2015-01-19
NUT, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS,
TYPE II
SAE
SAE
SAE
SAE
SAE
SAE AS85049/59_A3
En Vigor
2010-04-19
Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For
MIL-C-22992 Connectors, Classes C, J, and R)
SAE
SAE AS3176B
En Vigor
2019-09-11
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL
SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3A
SAE
SAE J345A_196903
En Vigor
1969-03-01
WET OR DRY PAVEMENT PASSENGER CAR TIRE PEAK AND LOCKED WHEEL BRAKING TRACTION
SAE
SAE MA2105A
En Vigor
2015-04-27
HOSE ASSEMBLY, METAL, MEDIUM PRESSURE, FLARELESS, WELDED, 45° TO 90°
FITTING ENDS, METRIC
SAE
SAE
SAE
SAE
SAE
SAE
SAE
SAE MA2537A
En Vigor
2018-08-09
Groove Design, Metal C-Ring Gasket, Face Type Internal Pressure, Metric
SAE
SAE J551/5_200401
En Vigor
2004-01-22
Performance Levels and Methods of Measurement of Magnetic and Electric
Field Strength from Electric Vehicles, Broadband, 9 kHz To 30 MHz
SAE
SAE MA614A
En Vigor
2015-07-27
Hose Assembly, Polytetrafluoroethylene (PTFE), Metallic Reinforced,
28,000 kPa, 204 °C, Hydraulic, Metric
SAE
SAE RS343-2
En Vigor
1953-08-14
RS343 6" Propeller Control Unit Pad and Drive, 5.400" PCD x
.875" Three Oilway
SAE
SAE
SAE
SAE
SAE
SAE MAM5706C
En Vigor
2003-03-12
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings
57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode
or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated
SAE
SAE
SAE MA4872A
En Vigor
2012-11-09
Paint Stripping of Commercial Aircraft - Evaluation of Materials and Processes
SAE
SAE J913_198502
En Vigor
1985-02-01
TEST METHOD FOR WICKING OF AUTOMOTIVE FABRICS AND FIBROUS MATERIALS
SAE
SAE J2230_202001
En Vigor
2020-01-15
Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor
Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus
SAE
SAE J592_201609
En Vigor
2016-09-09
Sidemarker Lamps for Use on Road Vehicles Less than 2032 mm in Overall Width
SAE
SAE MA2536
En Vigor
2012-11-08
GASKET, METAL C-RING, FACE SEAL, INTERNAL PRESSURE, UNS N07750 SILVER
PLATED, METRIC
SAE
SAE
SAE
SAE MAM4247A
En Vigor
1994-05-01
ALUMINUM ALLOY, HAND FORGINGS 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr
(7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and
Precipitation Heat Treated
SAE
SAE J381_200901
En Vigor
2009-01-27
Windshield Defrosting Systems Test Procedure and Performance
Requirements—Trucks, Buses, and Multipurpose Vehicles
SAE
