AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AS524
En Vigor
1993-05-01
FLANGE ACCESSORY 6.500 PILOT DIAMETER - QAD
SAE

SAE J20_200405
En Vigor
2004-05-10
Coolant System Hoses
SAE

SAE J115_198701
En Vigor
1987-01-01
SAFETY SIGNS
SAE

SAE J1062_201907
En Vigor
2019-07-24
Snowmobile Passenger Handgrips
SAE

SAE AMS2251E
En Vigor
1973-05-15
TOLERANCES Low-Alloy Steel Bars
SAE

SAE AS9217C
En Vigor
2012-02-01
BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A
SAE

SAE J356_201905
En Vigor
2019-05-09
Welded, Flash-Controlled, Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, Beading, Forming, and Brazing
SAE

SAE J1542_200302
En Vigor
2003-02-13
Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE

SAE AS5165B
En Vigor
2017-05-02
FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE
SAE

SAE J139_199006
En Vigor
1990-06-01
IGNITION SYSTEM NOMENCLATURE AND TERMINOLOGY
SAE

SAE MA2047C
En Vigor
2015-04-24
NUT, RETAINED, FLARELESS, METRIC
SAE

SAE AMS2629D
En Vigor
2014-01-10
Fluid, Jet Reference
SAE

SAE J1472_200609
En Vigor
2006-09-18
Braking Performance—Rollers
SAE

SAE J1472_201312
En Vigor
2013-12-17
Braking Performance - Rollers
SAE

SAE AS6225-2
En Vigor
1954-11-16
AS6225 Trim Control Assy. Direct Drive
SAE

SAE AS7110/6A
En Vigor
1997-11-01
NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR LASER WELDING
SAE

SAE J826A_197002
En Vigor
1970-02-01
DEVICES FOR USE IN DEFINING AND MEASURING VEHICLE SEATING ACCOMMODATION
SAE

SAE AMS2380C
En Vigor
1996-08-01
APPROVAL AND CONTROL OF PREMIUM-QUALITY TITANIUM ALLOYS
SAE

SAE AMS2436C
En Vigor
1993-10-01
COATING, ALUMINUM OXIDE Detonation Deposition
SAE

SAE AMS2451/6B
En Vigor
2022-05-25
Plating, Brush Copper General Purpose
SAE

SAE J945_199907
En Vigor
1999-07-15
Vehicular Hazard Warning Flashers
SAE

SAE J1461_199104
En Vigor
1991-04-01
MANUAL SLACK ADJUSTER TEST PROCEDURE
SAE

SAE MA3394A
En Vigor
2015-07-20
CLIP - SPRING, TENSION, INNER 6.7 MM BOLT HOLE, AMS 5525, METRIC
SAE

SAE AMS2222E
En Vigor
1982-07-01
TOLERANCES Copper and Copper Alloy Sheet, Strip, and Plate
SAE

SAE AS4074B
En Vigor
2017-02-21
Linear Token Passing Multiplex Data Bus
SAE

SAE AMS2426F
En Vigor
2024-01-16
Coating, Cadmium Vacuum Deposition
SAE

SAE J1254_198501
En Vigor
1985-01-01
COMPONENT NOMENCLATURE—FELLER BUNCHER
SAE

SAE J1928_200507
En Vigor
2005-07-26
Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
SAE

SAE J944_198006
En Vigor
1980-06-01
STEERING CONTROL SYSTEM—PASSENGER CAR—LABORATORY TEST PROCEDURE—SAE J944 JUN80
SAE

SAE AMS6415L
En Vigor
1988-10-01
STEEL BARS, FORGINGS, AND TUBING 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340)
SAE

SAE J734_199007
En Vigor
1990-07-01
COMPONENT NOMENCLATURE - DUMPER TRAILER
SAE

SAE J1939DA_202301
En Vigor
2023-01-30
J1939 Digital Annex
SAE

SAE AS43700-6
En Vigor
2021-04-08
AS43700-799 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .250-28 UNJF-3A
SAE

SAE MA2103
En Vigor
2002-03-07
HOSE ASSEMBLY, METAL, MEDIUM PRESSURE FLARELESS, WELDED, STRAIGHT TO 90° FITTING ENDS, METRIC
SAE

SAE AMS2248C
En Vigor
1981-10-01
CHEMICAL CHECK ANALYSIS LIMITS Wrought Corrosion and Heat Resistant, Steels and Alloys, Maraging, and Other Highly-Alloyed Steels, and Iron Alloys
SAE

SAE TS21-11
En Vigor
2004-12-01
TS21 Manufacturing Specification for Bolts 900 MPa (130,000 lbf/in²) Tensile at Room Temperature
SAE

SAE AS5767A
En Vigor
2015-12-01
FITTING ASSEMBLY, TEE, FEMALE FLARELESS ON RUN, AXIALLY SWAGED, HYDRAULIC, 5,080 PSI
SAE

SAE J1061_199805
En Vigor
1998-05-01
Surface Discontinuities on General Application Bolts, Screws, and Studs
SAE

SAE ARP741C
En Vigor
2016-08-12
Turbofan and Turbojet Gas Turbine Engine Test Cell Correlation
SAE

SAE JA1006_201205
En Vigor
2012-05-07
Software Support Concept