AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS5550B
En Vigor
1974-06-01
ALLOY SHEET AND STRIP, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 0.62Ti - 3.25Al
 
SAE

SAE AMS4140E
En Vigor
1978-10-01
ALUMINUM ALLOY FORGINGS 4.0Cu - 2.0Ni - 0.68Mg (2018-T61)
 
SAE

SAE AS6366-3
En Vigor
1956-04-06
AS6366 Spring - Cap - Oil Drain Valve
 
SAE

SAE AMS4219D
En Vigor
2001-10-01
Aluminum Alloy Castings 7.0Si - 0.55Mg - 0.12Ti - 0.06Be (A357.0 T61P) Solution and Precipitation Heat Treated
 
SAE

SAE AMS5571K
En Vigor
2023-05-22
Steel, Corrosion- and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
 
SAE

SAE AMS5744D
En Vigor
2000-09-01
Steel, Corrosion and Heat Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170 ksi (1172 MPa) Tensile Strength
 
SAE

SAE AS3102B
En Vigor
2024-03-04
BOLT, MACHINE - HEXAGON HEAD, PD, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, .3750-24 UNFJ-3A
 
SAE

SAE AMS4165J
En Vigor
2019-02-18
Aluminum Alloy, Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, and Straightened
 
SAE

SAE AS3262-2
En Vigor
1950-02-06
AS3262 Support for Embossed Plate - Strainer - Filter Fuel Type 'B'
 
SAE

SAE AMS4993C
En Vigor
2004-10-18
Titanium Alloy, Blended Powder Compacts, Sintered 6Al - 4V
 
SAE

SAE AMS5519F
En Vigor
1971-05-01
STEEL SHEET AND STRIP, CORROSION RESISTANT 18Cr - 8Ni (SAE 30301) Cold Rolled, 185,000 psi (1276 MN/m2)
 
SAE

SAE AMS6250J
En Vigor
2000-05-01
Steel Bars, Forgings, and Tubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (SAE 3310)
 
SAE

SAE AMS4635C
En Vigor
1978-07-15
ALUMINUM BRONZE RODS, BARS, AND FORGINGS 87Cu - 10Al - 3.0Fe (CDA 623)
 
SAE

SAE AMS4413A
En Vigor
2012-12-20
Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged
 
SAE

SAE AS15001B
En Vigor
2007-07-09
FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, STEEL, TYPE I
 
SAE

SAE AMS4351B
En Vigor
2024-12-10
Aluminum Alloy, Plate (7065-T7651), 7.7Zn - 2.1Cu - 1.65Mg - 0.10Zr, Solution Heat Treated, Stress-Relieved, and Overaged
 
SAE

SAE AMS5553E
En Vigor
1995-05-01
NICKEL, SHEET AND STRIP Low (0.02 max) Carbon Annealed
 
SAE

SAE AMS5812C
En Vigor
1979-07-01
STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
 
SAE

SAE AMS4264A
En Vigor
1995-08-01
Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90cu 7.0al 1.8si Drawn and Stress Relieved (Hr50)
 
SAE

SAE ARP4072A
En Vigor
2021-05-20
Safety Considerations of Carry-On Baggage Relating to the Emergency Evacuation of Transport Category Aircraft
 
SAE

SAE AMS5561A
En Vigor
1980-07-01
STEEL TUBING, WELDED AND DRAWN, CORROSION AND HEAT RESISTANT 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic
 
SAE

SAE AMS5540K
En Vigor
1988-10-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 74Ni - 15.5Cr - 8.0Fe Annealed
 
SAE

SAE AMS5637K
En Vigor
2023-10-05
Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength
 
SAE

SAE AS3222A
En Vigor
2011-08-15
COVER - ENGINE ACCESSORY DRIVE, SQUARE 5.000 (127) BOLT CIRCLE
 
SAE

SAE AMS5393D
En Vigor
1978-04-15
ALLOY IRON CASTINGS, SAND, MODERATE CORROSION AND HEAT RESISTANT 2.0Cr - 20Ni (2.4 - 2.8C)
 
SAE

SAE AMS4941E
En Vigor
2008-02-19
Titanium Tubing, Welded Annealed, 40 ksi (276 MPa) Yield Strength
 
SAE

SAE ARP488A
En Vigor
1967-05-15
EXITS AND THEIR OPERATION - AIR TRANSPORT CABIN EMERGENCY
 
SAE

SAE AS3320A
En Vigor
2001-11-28
STUD - STRAIGHT, RING LOCKED, CRES AMS-5731 0.250-20UNJC X 0.250-28UNJF
 
SAE

SAE AMS5759B
En Vigor
1961-07-01
ALLOY, CORROSION AND HEAT RESISTANT Cobalt Base - 20Cr - 10Ni - 15W
 
SAE

SAE AMS5387E
En Vigor
2015-12-01
Alloy, Corrosion and Heat Resistant, Investment Castings 60Co - 29Cr - 4.5W As Cast
 
SAE

SAE AMS5356C
En Vigor
2010-02-24
Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength
 
SAE

SAE AMS5823A
En Vigor
1981-07-01
STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V
 
SAE

SAE AMS6330H
En Vigor
2012-11-05
Steel Bars, Forgings, and Tubing 0.65Cr – 1.25Ni (0.33 – 0.38C)
 
SAE

SAE AMS4788C
En Vigor
2021-09-01
Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
 
SAE

SAE AS4210C
En Vigor
2007-02-22
FITTING, TEE, BEAM SEAL
 
SAE

SAE AMSWWT700/5B
En Vigor
2018-02-15
Tube, Aluminum Alloy, Drawn, Seamless, 5086
 
SAE

SAE ARP4915C
En Vigor
2024-12-03
Disposition of Landing Gear Components Involved in Accidents/Incidents
 
SAE

SAE AMS4150N
En Vigor
2019-05-14
Aluminum Alloy, Extrusions and Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6) Solution and Precipitation Heat Treated
 
SAE

SAE AMS6471B
En Vigor
1979-10-15
STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.6Cr - 0.35Mo - 1.2Al (0.38 - 0.43C) Premium Quality, Consumable Electrode Vacuum Melted
 
SAE

SAE AMS5831D
En Vigor
2015-12-03
Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N