AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS2670K
En Vigor
2022-06-20
Brazing, Copper
SAE

SAE AMS4924E
En Vigor
2002-01-24
Titanium Alloy Bars, Forgings, and Rings 5Al - 2.5Sn, Extra Low Interstitial Annealed
SAE

SAE AMS4128E
En Vigor
2021-06-28
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
SAE

SAE AMS3196H
En Vigor
2023-05-01
Sponge, Silicone Rubber Closed Cell, Firm
SAE

SAE AMS5121J
En Vigor
2006-01-26
Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed
SAE

SAE AIR4566
En Vigor
2007-07-09
Crashworthy Landing Gear Design
SAE

SAE AMS4778K
En Vigor
2013-03-21
Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range
SAE

SAE AMS5689E
En Vigor
1995-05-01
Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated
SAE

SAE AIR975
En Vigor
1984-10-01
MAINTENANCE OF PITOT-STATIC SYSTEMS OF TRANSPORT AIRCRAFT
SAE

SAE AMS4625C
En Vigor
1946-11-01
PHOSPHOR BRONZE BARS Hard
SAE

SAE AMS4215E
En Vigor
1991-04-01
ALUMINUM ALLOY CASTINGS 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6P) Solution and Precipitation Heat Treated
SAE

SAE AMS3655A
En Vigor
1991-10-01
TUBING, ELECTRICAL INSULATION Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE

SAE AMS4094C
En Vigor
2012-05-01
Aluminum Alloy, Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T81 Sheet Solution Heat Treated, Cold Worked, and Precipitation Heat Treated Alclad 2219-T851 Plate Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
SAE

SAE AMS4080A
En Vigor
1942-08-01
ALUMINUM ALLOY TUBING Magnesium Silicon Copper (61S-0)
SAE

SAE AMS4787C
En Vigor
1990-04-01
BRAZING FILLER METAL, HIGH TEMPERATURE 82Au - 18Ni 1740°F (949°C) Solidus-Liquidus Temperature
SAE

SAE AMS5613D
En Vigor
1961-01-01
STEEL, CORROSION AND MODERATE HEAT RESISTANT 12.5Cr (SAE 51410)
SAE

SAE AMS4966N
En Vigor
2008-12-19
Titanium Alloy, Forgings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
SAE

SAE AMS3358B
En Vigor
2001-10-23
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa·s) Viscosity
SAE

SAE AMS5689F
En Vigor
2012-04-16
Steel, Corrosion and Heat Resistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated
SAE

SAE AMS5501F
En Vigor
2019-03-26
Steel, Corrosion Resistant, Sheet, Strip, and Foil 19Cr - 9.5Ni (304) Cold Rolled, 125 ksi (862 MPa) Tensile Strength