AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS5391B
En Vigor
1976-01-01
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 73Ni - 13Cr - 4.5Mo - 2.3 (Cb+Ta) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Melted
SAE

SAE AMS3205G
En Vigor
1977-07-01
SYNTHETIC RUBBER Low-Temperature Resistant 45 - 55
SAE

SAE AMS4805D
En Vigor
1986-10-01
BEARINGS, SINTERED METAL POWDER 89Cu - 10Sn Oil Impregnated
SAE

SAE AMS4050C
En Vigor
1984-10-01
ALUMINUM ALLOY PLATE 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050 - T7451) Solution Heat Treated, Stress Relieved, and Overaged
SAE

SAE AMS5670E
En Vigor
1999-01-01
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
SAE

SAE AMS3832C
En Vigor
1994-05-01
ROVING, TYPE "S-2" GLASS Epoxy Resin Impregnated
SAE

SAE AMS4173A
En Vigor
1979-10-01
ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Stress Relief Stretched and Straightened
SAE

SAE AMS3302D
En Vigor
1965-02-01
SILICONE RUBBER General Purpose 45 - 55
SAE

SAE AMS4148E
En Vigor
2011-11-07
Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated
SAE

SAE AMS2451/9B
En Vigor
2012-09-20
Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement
SAE

SAE AMS4358A
En Vigor
1987-01-01
Magnesium Alloy Forgings Az61x
SAE

SAE AMS3787/8B
En Vigor
2013-09-11
Thread, Para-Aramid Intermediate Modulus 500 yards per pound (1008 m/kg), 225 pounds force (1001 N) Breaking Strength
SAE

SAE AMS4786B
En Vigor
1984-01-01
BRAZING FILLER METAL, HIGH TEMPERATURE 70Au - 8.0Pd - 22Ni 1845° - 1915°F (1005° - 1045°C) Solidus-Liquidus Range
SAE

SAE AIR4295
En Vigor
2011-11-15
Handbook for the Digital Time Division Command/Response Multiplex Data Bus Test Plans
SAE

SAE AMS3613E
En Vigor
2016-11-18
Film, Copper Clad Polyester
SAE

SAE AMS4144C
En Vigor
1985-07-01
ALUMINUM ALLOY HAND FORGINGS AND RINGS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated
SAE

SAE AMS3635C
En Vigor
2011-08-16
PLASTIC SHEET AND STRIP, MODIFIED VINYL, FOAMED Closed Cell
SAE

SAE AMS5512L
En Vigor
2012-10-12
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution Heat Treated
SAE

SAE AMS5406B
En Vigor
2007-04-05
Alloy Castings, Investment, Corrosion and Heat Resistant, 63Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf, Vacuum Melted, Vacuum Cast, As Cast
SAE

SAE AMS5637J
En Vigor
2018-07-27
Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength