AENOR Logo

Normas SAE

49877 Available results

Filtrar:

(40986)
(8891)
SAE

SAE AMS4092A
In Force
1966-01-01
Aluminum Alloy, Tubing, Seamless, Drawn (6062 T6)
SAE

SAE AMS4133C
In Force
1994-04-01
ALUMINUM ALLOY FORGINGS AND ROLLED RINGS 4.4CU - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS7445B
In Force
1984-10-01
BALLS, STEEL, CORROSION RESISTANT 17Cr Hardened
SAE

SAE AMS7458C
In Force
1973-05-15
STUDS, STEEL, LOW-ALLOY HEAT RESISTANT Normalized and Tempered, Roll Threaded 135,000 psi (931 MPa) Tensile Strength
SAE

SAE AMS5663L
In Force
2003-07-14
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1775 °F (968 °C) Solution and Precipitation Heat Treated
SAE

SAE AMS5664B
In Force
1980-10-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb+Ta) - 0.90Ti - 0.50Al - 19Fe Consumable Electrode or Vacuum Induction Melted 1950° F (1065° C) Solution Treated
SAE

SAE AMS5544G
In Force
1995-05-01
ALLOY, CORROSION AND HEAT RESISTANT, SHEET, STRIP, AND PLATE 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
SAE

SAE AMS3901/11A
In Force
1992-10-01
YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390 (2689)/22.2 Tensile Strength, 16.5 (114)/870 Tensile Modulus 1420 Denier, 1.2% Finish
SAE

SAE AMS4132B
In Force
1976-01-01
ALUMINUM ALLOY FORGINGS 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61)
SAE

SAE AMS7712C
In Force
1992-04-01
STEEL SHEET AND STRIP, FLAT-ROLLED, ELECTRICAL, NON-ORIENTED 3.0(Si + Al) Type 47S178 or Type 64S194, Semi-Processed
SAE

SAE AS1712A
In Force
1984-01-01
COUPLING SUB-ASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE

SAE AMS7325C
In Force
1966-09-01
RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL
SAE

SAE AMS7295/2B
In Force
1998-07-01
Radiographic Film 5-60
SAE

SAE AS14103D
In Force
2008-03-25
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F
SAE

SAE AS21154B
In Force
2011-12-15
BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING
SAE

SAE AS1926-6
In Force
1941-12-12
AS1926 Bolt Block
SAE

SAE AS1132G
In Force
2004-03-19
Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard
SAE

SAE AMSWWT700/6C
In Force
2015-09-14
Tube, Aluminum Alloy, Drawn, Seamless, 6061
SAE

SAE AMSS8802C
In Force
2011-03-28
Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE

SAE ARP600
In Force
1996-05-01
TORQUE DETERMINATION, METHOD OF, FOR TUBE OR HOSE END FITTING CONNECTIONS, FLARED, FLARELESS, OR MISCELLANEOUS SCREW THREAD STYLE