AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS4231A
En Vigor
1945-05-01
ALUMINUM ALLOY CASTINGS Sand 4.5 Copper Solution and Precipitation (195-T6)
SAE

SAE AS4111A
En Vigor
2017-08-10
Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals
SAE

SAE AMS4202C
En Vigor
1994-04-01
ALUMINUM ALLOY PLATE 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated
SAE

SAE AS4417
En Vigor
2006-05-04
Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated, 1400 °F (760 °C), Procurement Specification
SAE

SAE AS5191C
En Vigor
2023-12-13
FITTING, ELBOW, 45°, INTERNAL STRAIGHT THREAD PORT
SAE

SAE AS683E
En Vigor
2019-10-28
Installation Procedures and Torques for Fluid Connections
SAE

SAE AMS4897E
En Vigor
2020-12-21
Titanium Alloy, Sheet and Strip 15Mo - 3.0AI - 2.8Cb - 0.20Si
SAE

SAE AMS4625H
En Vigor
2016-09-20
Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper
SAE

SAE AMS5345
En Vigor
2002-12-16
Centrifugal Steel Castings Chromium Molybdenum 38-45
SAE

SAE AMS5110J
En Vigor
2011-05-26
Carbon Steel, Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn
SAE

SAE AMS4924A
En Vigor
1966-03-15
TITANIUM ALLOY BARS, FORGINGS, AND RINGS 5Al - 2.5Sn - Extra Low Interstitial Annealed, 90,000 psi Yield
SAE

SAE AMS4987F
En Vigor
2020-01-14
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength
SAE

SAE AMS4964C
En Vigor
2019-05-28
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed
SAE

SAE AMS5044A
En Vigor
1945-10-01
STEEL SHEET AND SHIP Low Carbon - Half Hard
SAE

SAE AMS4122K
En Vigor
2007-11-16
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS4210E
En Vigor
1952-02-15
ALUMINUM ALLOY CASTINGS, SAND 5Si - 1.3Cu - 0.5Mg (355-T51) Stress Relieved
SAE

SAE AMS4775J
En Vigor
2010-10-28
Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 °F (977 to 1077 °C) Solidus-Liquidus Range
SAE

SAE AMS4212J
En Vigor
2005-10-17
Aluminum Alloy Castings 5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated
SAE

SAE AMS4275C
En Vigor
1977-01-15
ALUMINUM ALLOY CASTINGS, PERMANENT MOLD 6.2Sn - 1.0Cu - 1.0Ni (850.0-T5) Stress Relieved
SAE

SAE AMS4443D
En Vigor
1992-01-01
MAGNESIUM ALLOY CASTINGS, SAND 4.5Zn - 0.75Zr (ZK51A-T5) Precipitation Heat Treated