AENOR Logo

Normas SAE

49877 Resultados disponibles

Filtrar:

(40986)
(8891)
SAE

SAE AMS2480B
En Vigor
1966-09-01
PHOSPHATE TREATMENT Paint Base
SAE

SAE AMS2201H
En Vigor
1967-11-01
TOLERANCES Aluminum and Aluminum Alloy Bar, Rod, Wire, and Forging Stock Rolled or Drawn
SAE

SAE AMS2315G
En Vigor
2013-02-11
Determination of Delta Ferrite Content
SAE

SAE AMS2242B
En Vigor
1968-05-01
TOLERANCES Corrosion and Heat Resistant Steel and Iron Base Alloy Sheet, Strip, and Plate and Titanium and Titanium Alloy Sheet, Strip, and Plate
SAE

SAE AMS3279C
En Vigor
2008-03-17
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (177 °C)
SAE

SAE AMS3634D
En Vigor
1993-07-01
TUBING, POLYOLEFIN PLASTIC, ELECTRICAL INSULATION Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable
SAE

SAE AMS2759/4C
En Vigor
2014-04-23
Heat Treatment Austenitic Corrosion-Resistant Steel Parts
SAE

SAE AMS3387F
En Vigor
2020-04-16
Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Textile Reinforced, Chloroprene Covered Noncollapsing
SAE

SAE AMS3732
En Vigor
2011-08-09
POTTING COMPOUND, EPOXY One Part, Filled, Heat Cure, Low CTE
SAE

SAE AMS3241F
En Vigor
1981-10-01
CHLOROPRENE RUBBER Weather Resistant 55 - 65
SAE

SAE AMS3630E
En Vigor
1992-10-01
PLASTIC EXTRUSIONS, FLEXIBLE Polyvinyl Chloride
SAE

SAE AMS2262F
En Vigor
1994-04-01
TOLERANCES Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
SAE

SAE AMS3306C
En Vigor
2014-05-27
Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65
SAE

SAE AMS2816W
En Vigor
2025-07-21
Identification Welding Wire, Tab Marking Method
SAE

SAE AMS2478B
En Vigor
1975-06-01
ANODIC TREATMENT OF MAGNESIUM ALLOYS Acid Type, Full Coat
SAE

SAE AMS3608A
En Vigor
1979-10-15
PLASTIC SHEET Methyl Methacrylate, General Purpose
SAE

SAE AMS3731/8C
En Vigor
2016-09-22
Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, High HDT
SAE

SAE AMS3281D
En Vigor
2008-03-26
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE

SAE AMS3155C
En Vigor
1994-04-01
OIL, FLUORESCENT PENETRANT Solvent-Soluble
SAE

SAE AMS3678/10B
En Vigor
2016-02-29
Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber