AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AS5604A
En Vigor
2012-08-22
Compass; Magnetic, Pilot's Standby
SAE

SAE AMS5605F
En Vigor
2013-08-12
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
SAE

SAE AS1895/7H
En Vigor
2021-06-22
SEAL, TYPE I AND II STANDARD AND LOW PROFILE
SAE

SAE AMS5610B
En Vigor
1944-03-01
STEEL, CORROSION RESISTANT 13 Chromium (Free Machining)
SAE

SAE AS100006
En Vigor
2011-08-15
GASKET - TYPE XVI ENGINE ACCESSORY DRIVE
SAE

SAE AMS6412C
En Vigor
1950-12-01
STEEL 1.8Ni - 0.8Cr - 0.25Mo (0.35-0.40C) (4337)
SAE

SAE AMS6315C
En Vigor
1946-08-01
Steel 1.8ni .25mo (0.38 - 0.43c) Heat Treated (105,000 Tensile Strength)
SAE

SAE AS3063C
En Vigor
2024-04-10
Bolts, Screws, and Studs, Geometric Control Requirements
SAE

SAE AMS5681C
En Vigor
1979-07-16
WELDING ELECTRODES, COVERED, STEEL, CORROSION AND HEAT RESISTANT 19.5Cr - 10.5Ni - 0.60(Cb + Ta)
SAE

SAE AS9788B
En Vigor
2020-11-19
BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .5000-20 UNJF-3A
SAE

SAE AS3265-2
En Vigor
1950-02-06
AS3265 Top Cap - Strainer - Filter Fuel Type 'B'
SAE

SAE AMS7490E
En Vigor
1962-06-01
RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE

SAE AS22520/10
En Vigor
2021-12-27
CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
SAE

SAE AS100005C
En Vigor
2006-10-10
GASKET - TYPE XIV-C ENGINE ACCESSORY DRIVE
SAE

SAE ARP796
En Vigor
2002-12-16
MEASUREMENTS OF AIRCRAFT EXTERIOR NOISE IN THE FIELD
SAE

SAE AMS5599J
En Vigor
2022-07-06
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7 Cb (Nb) Annealed
SAE

SAE AMS7490D
En Vigor
1960-01-01
RINGS, FLASH WELDED Corrosion and Heat Resistant Austenitic Steels and Austenitic-Type Alloys
SAE

SAE AMS5660E
En Vigor
1971-05-01
ALLOY BARS AND FORGINGS, CORROSION AND HEAT RESISTANT Nickel Base - 12.5Cr - 6.0Mo - 2.7Ti - 34Fe Consumable Electrode or Vacuum Induction Melted
SAE

SAE AMS6356C
En Vigor
1983-04-01
STEEL SHEET, STRIP, AND PLATE 0.95Cr - 0.20Mo (0.30 - 0.35C)
SAE

SAE AS1330-4
En Vigor
2015-12-04
AS1330-1384 3 CWT Cable and Swaged End Assembly Code