AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS4911C
En Vigor
1973-12-01
TITANIUM ALLOY SHEET, STRIP, AND PLATE 6Al - 4V Annealed
SAE

SAE AMS5779B
En Vigor
1995-05-01
ALLOY WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT 75Ni - 15Cr - 1.5 (Cb + Ta) - 1.9Ti - 0.55Al - 5.5Fe
SAE

SAE AS1034B
En Vigor
1993-04-01
ELBOW, 90°, REDUCER, FLARED TUBE
SAE

SAE AMS4254C
En Vigor
2017-05-25
Aluminum Alloy, Aramid Fiber Reinforced, Laminated Sheet 4.4Cu - 1.5Mg - 0.6Mn (2024-T3) 3, 5, 7, or 9 Ply
SAE

SAE AMSS83318A
En Vigor
2003-01-16
Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities
SAE

SAE AMS4634
En Vigor
2000-09-01
ALUMINUM BRONZE BARS, RODS, AND FORGINGS 90.5Cu - 7.5Al - 1.9Si Stress Relieved
SAE

SAE AMS6342C
En Vigor
1964-01-31
STEEL BARS AND FORGINGS 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840)
SAE

SAE AMS7240C
En Vigor
1972-11-01
WASHERS, SPRING LOCK Carbon Steel
SAE

SAE AMS4263A
En Vigor
1993-01-01
Aluminum Silicon Bronze Bars, Rods, and Forgings, 90cu 7.0al 1.9si, Drawn and Stress Relieved
SAE

SAE AMS5590E
En Vigor
2006-04-19
Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
SAE

SAE AMS5525J
En Vigor
2012-10-12
Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated
SAE

SAE AMS5703B
En Vigor
1988-01-01
ALLOY BARS, FORGINGS, AND RINGS CORROSION AND HEAT RESISTANT 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted, 1750°F (955°C) Solution, Stabilization, and Precipitation Heat Treated
SAE

SAE AMS5030F
En Vigor
2011-08-10
WIRE, STEEL WELDING 0.06 Carbon, Maximum
SAE

SAE AMS6300F
En Vigor
2011-05-17
Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)
SAE

SAE AS20708/28B
En Vigor
2016-07-22
Synchro, Control Transmitter, Type 18CX4D
SAE

SAE AMS4244D
En Vigor
2022-08-09
Aluminum Alloy, Welding Wire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti for Welding A206.0 Type Alloys
SAE

SAE AS17109A
En Vigor
2014-11-13
BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, THIN EXTRA LIGHT, TYPE III
SAE

SAE AMS4163F
En Vigor
2017-09-13
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE

SAE AMS4611J
En Vigor
2019-07-26
Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02)
SAE

SAE AMS5929
En Vigor
2014-06-10
Steel, Corrosion-Resistant, Bars and Forgings 11.5Cr -10Ni - 1.0Al - 0.5Ti - 1.0Cu - 1.0W Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable