Normas SAE
Filtrar:
SAE
SAE AMS4128C
En Vigor
2001-11-15
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
SAE
SAE AMS5225G
En Vigor
2021-06-01
Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution
Heat Treated, Cold Rolled, 50% Reduction
SAE
SAE AMS5540H
En Vigor
1970-05-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT Nickel Base
- 15.5Cr - 8.0Fe
SAE
SAE AMS5540K
En Vigor
1988-10-01
ALLOY SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 74Ni -
15.5Cr - 8.0Fe Annealed
SAE
SAE AMS3902C
En Vigor
1995-05-01
CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS For Structural Composites
SAE
SAE AMS4128E
En Vigor
2021-06-28
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
SAE
SAE AMS5338C
En Vigor
2011-08-10
STEEL CASTINGS, INVESTMENT 0.95Cr - 0.20Mo (0.35 - 0.45C) Normalized
SAE
SAE AMS5755E
En Vigor
2000-09-01
Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings
64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat Treated
SAE
SAE AMS3894/14B
En Vigor
2016-09-13
Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90000 (621)
Tensile, 40000000 (276) Modulus, 175 (347)
SAE
SAE
SAE AMS6417H
En Vigor
2015-07-08
Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo -
0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted
SAE
SAE AMS5848D
En Vigor
2009-03-25
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Tubing,
and Rings Wear and Galling Resistant 8.0Mn – 4.0Si – 17Cr – 8.5Ni –
0.13N Solution Heat Treated
SAE
SAE AMS4067E
En Vigor
1976-07-01
ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, ROUND 1.25Mn - 0.12Cu (3003-H14)
SAE
SAE ARP958C
En Vigor
2026-05-24
ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION METHOD
SAE
SAE AMS7251A
En Vigor
1969-11-01
NUTS, SELF-LOCKING, CORROSION AND HEAT RESISTANT High Strength,
Prevailing-Torque, All Metal 1200 F (649 C) Use, Unified "J"
(MIL-S-8879) Thread Form
SAE
SAE AMS6386C
En Vigor
2011-11-03
Steel Sheet and Plate Low Alloy, Heat Treated 90,000 psi (621 MPa) and
100,000 psi (690 MPa) Yield Strength
SAE
SAE AMS5890E
En Vigor
2009-07-16
Nickel, Corrosion and Heat-Resistant, Bars, Forgings, and Extrusions
Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved
SAE
SAE AMS5827B
En Vigor
1979-07-16
STEEL WELDING ELECTRODES, COVERED, CORROSION RESISTANT 16.4Cr - 4.8Ni -
0.22(Cb + Ta) - 3.6Cu
SAE
SAE AMS7454F
En Vigor
1972-11-01
BOLTS AND SCREWS, STEEL, LOW-ALLOY HEAT-RESISTANT Normalized and
Tempered, Roll Threaded
SAE
SAE AS21220A
En Vigor
2005-08-03
BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION,
AIRFRAME, HEAVY DUTY, TYPE II, -67° TO 350°F, SEALED
