AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS7456D
En Vigor
1956-07-01
STUDS, STEEL, ALLOY Heat Treated - Roll Threaded
SAE

SAE AMS5832D
En Vigor
1991-01-01
ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb+Ta) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
SAE

SAE ARP6161
En Vigor
2017-10-18
Flight Compartment Glare
SAE

SAE AMSR83248A
En Vigor
2005-09-22
Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant
SAE

SAE AMS5745B
En Vigor
1981-04-01
STEEL BARS AND FORGINGS, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized and Over-tempered
SAE

SAE AMS7240B
En Vigor
1955-03-01
WASHERS, SPRING LOCK
SAE

SAE AMS5559H
En Vigor
1996-03-01
STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin Wall Solution Heat Treated
SAE

SAE AMS5359C
En Vigor
2011-08-10
STEEL CASTINGS, SAND, CORROSION AND HEAT RESISTANT 15Cr - 4.0Ni - 2.3Mo - 0.08N Solution Heat Treated
SAE

SAE AMS4190L
En Vigor
2021-12-01
Aluminum Alloy, Welding Wire 5.2Si (4043)
SAE

SAE AMS6385L
En Vigor
2020-04-28
Steel Sheet, Strip, and Plate, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C)
SAE

SAE ARP1782B
En Vigor
2012-09-12
Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays
SAE

SAE AS1034D
En Vigor
2001-01-01
FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARED
SAE

SAE AMS5385F
En Vigor
1995-05-01
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Co - 27Cr - 2.8Ni - 5.5Mo As Cast
SAE

SAE AMS5343F
En Vigor
2019-11-05
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4)
SAE

SAE ARP6227
En Vigor
2024-03-18
JAUS Messaging over the OMG Data Distribution Service (DDS)
SAE

SAE AMS5530G
En Vigor
2012-04-10
Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated
SAE

SAE AS21004D
En Vigor
2022-07-13
TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
SAE

SAE AMS6487J
En Vigor
2007-04-24
Steel, Bars, and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted
SAE

SAE AMS4174B
En Vigor
1989-04-01
ALUMINUM ALLOY FLASH WELDED RINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE

SAE AMS4933B
En Vigor
1994-04-01
TITANIUM ALLOY EXTRUSIONS AND FLASH WELDED RINGS 8Al - 1Mo - 1V Solution Heat Treated and Stabilized