Normas SAE
Filtrar:
SAE
SAE AMS4783G
En Vigor
2014-12-11
Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr
- 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus Range
SAE
SAE AMS5698A
En Vigor
1957-09-01
ALLOY WIRE, CORROSION AND HEAT RESISTANT Nickel Base - 15.5Cr - 7Fe -
2.3Ti - 1(Cb+Ta) - 0.7Al No. 1 Temper
SAE
SAE AMS5410C
En Vigor
2022-05-12
Nickel Alloy, Corrosion- and Heat Resistant, Investment Castings 61Ni -
16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb (Nb) - 3.4Ti - 1.8Ta - 3.4Al -
0.010B - 0.05Zr Vacuum Melted, Vacuum Cast, As Cast, or Solution
Treated, or Solution and Precipitation Hardened
SAE
SAE AMS4214E
En Vigor
1978-10-16
ALUMINUM ALLOY CASTINGS, SAND 5.0Si - 1.2Cu - 0.50Mg (355.0-T71)
Solution Heat Treated and Overaged
SAE
SAE AMS5526C
En Vigor
1960-11-01
STEEL SHEET AND STRIP, CORROSION AND HEAT RESISTANT 20Cr - 9Ni - 1.4Mo -
1.4W - Cb - Ti
SAE
SAE AMS4992A
En Vigor
2010-04-19
Castings, Structural Investment, Titanium Alloy 6Al - 4V Hot
Isostatically Pressed
SAE
SAE AMS4901F
En Vigor
1977-01-15
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (483 MPa) Yield Strength
SAE
SAE
SAE
SAE
SAE AMS3788/3B
En Vigor
1995-10-01
Cloth, Nylon Twill 5.4 ounces per square yard (183 g/m₂), Smooth Finish
SAE
SAE
SAE AMS5373E
En Vigor
2017-04-06
Alloy Castings, Sand, Corrosion and Heat Resistant 16Co - 29Cr - 4.5W As Cast
SAE
SAE
SAE AMS4045H
En Vigor
2000-07-01
Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6
Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE
SAE AMS4778J
En Vigor
2012-06-01
Nickel Alloy, Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F
Solidus-Liquidus Range
SAE
SAE
SAE
SAE AMS5344B
En Vigor
1985-07-01
STEEL CASTINGS, INVESTMENT, CORROSION RESISTANT 16Cr - 4.1Ni -
0.28(Cb+Ta) - 3.2Cu Solution and Precipitation Heat Treated 180,000 psi
(1240 MPa) Tensile Strength
SAE
SAE AMS4164B
En Vigor
1963-01-01
ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3510)
Stress-Relief Stretched, Unstraightened
