AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE J844_196306
En Vigor
1963-06-01
AIR BRAKE TUBING AND PIPE
 
SAE

SAE RS614-3
En Vigor
1978-02-01
RS614 Recommended Colour Code for the Identification of Rubbers in Aircraft
 
SAE

SAE AMS5903B
En Vigor
2012-04-16
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
 
SAE

SAE AS1895/23C
En Vigor
2021-06-22
HIGH CONFORMANCE SEAL, TYPE I AND II STANDARD AND LOW PROFILE
 
SAE

SAE J2181_201109
En Vigor
2011-09-12
Steady-State Circular Test Procedure for Trucks and Buses
 
SAE

SAE J2945/2_202511
En Vigor
2025-11-10
Dedicated Short Range Communications (DSRC) Performance Requirements for V2V Safety Awareness
 
SAE

SAE J1939_201104
En Vigor
2011-04-14
Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document
 
SAE

SAE AS22520/38A
En Vigor
2023-08-21
CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 22-10
 
SAE

SAE AMS6544E
En Vigor
2018-05-24
Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted, Solution Heat Treated
 
SAE

SAE J1889_199310
En Vigor
1993-10-01
L.E.D. LIGHTING DEVICES
 
SAE

SAE AS9916B
En Vigor
2023-01-13
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3125-24 UNJF-3A
 
SAE

SAE AMS6370K
En Vigor
1994-04-01
STEEL BARS, FORGINGS, AND RINGS 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
 
SAE

SAE AGS3034-5
En Vigor
1969-01-02
AGS3034 9/16" U.N.F. (Air and Mineral Base Hydraulic Fluid) Charging Valve
 
SAE

SAE AS22520/46A
En Vigor
2023-01-13
CRIMPING TOOLS, TYPE 1, TERMINAL, HAND, WIRE TERMINATINO FOR MINIATURE CO-AXIAL AND TRI-AXIAL INNER CONTACTS
 
SAE

SAE AS5402A
En Vigor
2021-04-23
Design and Performance Criteria Aircraft Crash Axes
 
SAE

SAE J1389_200110
En Vigor
2001-10-08
Corrosion Test for Insulation Materials
 
SAE

SAE AGS1200-7
En Vigor
1944-03-16
AGS1200 Charging Valve. Mark. I, (Air and Hydraulic) General Arrangement
 
SAE

SAE AS3147B
En Vigor
2019-03-28
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .1900-32 UNJF-3A
 
SAE

SAE AS9464A
En Vigor
2002-03-15
PIN, STRAIGHT, HEADED, .248 DIAMETER, CRES, UNS S66286
 
SAE

SAE J2295_200404
En Vigor
2004-04-01
Fastener Part Standard—Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)