Normas SAE
Filtrar:
SAE
SAE AMS4086K
En Vigor
1983-07-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN 4.4Cu - 1.5Mg - 0.60Mn
(2024-T3) Solution Heat Treated, Cold Worked, and Naturally Aged
SAE
SAE AMS5362M
En Vigor
2021-06-01
Steel, Corrosion and Heat Resistant, Investment Castings 19Cr - 12Ni -
1.0Cb (Nb) Solution Heat Treated
SAE
SAE AMS4078F
En Vigor
2000-02-01
Aluminum Alloy Plate (7075-T7351) Solution Heat Treated, Stress
Relieved, and Overaged
SAE
SAE AMS5614E
En Vigor
2013-08-12
Steel, Corrosion and Heat Resistant, Bars, Wire, and Forgings 12Cr -
0.50Mo Annealed
SAE
SAE AMS4118M
En Vigor
2022-07-06
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu -
0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
SAE
SAE AMS5559G
En Vigor
1996-01-01
STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING 18Cr - 10.5Ni -
0.40Ti (SAE 30321) Thin Wall Solution Heat Treated
SAE
SAE AMS5659B
En Vigor
1966-09-01
STEEL BARS, FORGINGS, AND RINGS, CORROSION RESISTANT 15Cr - 5Ni - 4Cu
Consumable Electrode Melted
SAE
SAE AMS5512E
En Vigor
1976-01-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 18Cr -
10.5Ni - (Cb + Ta) (SAE 30347)
SAE
SAE
SAE
SAE AMS4773B
En Vigor
1978-07-15
BRAZING FILLER METAL, SILVER 60Ag - 30Cu - 10Sn 1115° - 1325°F (600° -
720°C) Solidus-Liquidus Range
SAE
SAE AMS5361E
En Vigor
2007-04-24
Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant
18.5Cr - 13.5Ni - 2.1Mo Solution Heat Treated
SAE
SAE AMS3797/10A
En Vigor
1989-01-01
WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1-1/8 (28) Wide, 10,000 (44,482)
Breaking Strength
SAE
SAE AMS4334B
En Vigor
2017-04-21
Aluminum Alloy, Forgings 7.8Zn - 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452)
SAE
SAE AMS4640J
En Vigor
2023-11-10
Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al
- 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)
SAE
SAE AMS4310A
En Vigor
1983-01-01
ALUMINUM ALLOY RINGS, ROLLED OR FORGED 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr
(7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress
Relieved, and Precipitation Heat Treated
SAE
SAE AMS4163G
En Vigor
2022-10-04
Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti
(2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE
SAE AMS4338C
En Vigor
2024-10-08
Aluminum Alloy, Extrusions 4.0Cu - 1.3Mg - 0.60Mn (2026-T3511) Solution
Heat Treated and Stress Relieved by Stretching
SAE
SAE AMS5409A
En Vigor
2002-08-21
Castings, Alloy-Investment, 61ni 16cr 8.5co 1.8mo 2.6w 0.8cb 3.4ti 1.8ta
3.4al 0.010b 0.06zr (0.03-0.08c), Vacuum Melted, Vacuum Cast, as Cast
SAE
SAE AMS4303B
En Vigor
2012-09-27
Aluminum Alloy Plate 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat
Treated, Cold Worked, and Aged
