Normas SAE
Filtrar:
SAE
SAE
SAE
SAE AMS4987E
En Vigor
2015-01-15
Titanium Alloy, Forgings 10V - 2Fe - 3AI Consumable Electrode Melted,
Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength
SAE
SAE
SAE AMS5591F
En Vigor
1981-01-01
STEEL TUBING, SEAMLESS, CORROSION AND MODERATE HEAT RESISTANT 12.5Cr
(SAE 51410)
SAE
SAE AMS5580G
En Vigor
1988-10-01
ALLOY TUBING, SEAMLESS, CORROSION AND HEAT RESISTANT 74Ni - 15.5Cr -
8.0Fe Annealed
SAE
SAE AMS5768F
En Vigor
1974-06-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 21Cr -
20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 31Fe Solution and
Precipitation Heat Treated
SAE
SAE AMS4105
En Vigor
2002-12-16
Aluminum Alloy, Sheet and Plate 4.5cu 1.5mg 0.60mn (2024-T86) Width Over
48 to 60 In., Incl.
SAE
SAE
SAE AMS3797/3B
En Vigor
1994-03-01
WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1 (25) Wide, 3000 (13,345)
Breaking Strength
SAE
SAE AMS5635F
En Vigor
2012-04-11
Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb
(303Pb) Free-Machining, Solution Heat Treated
SAE
SAE
SAE
SAE AMS5633D
En Vigor
1993-07-01
Alloy Bars and Forgings, Corrosion and Heat Resistant, 38fe 13.2cr 38ni
5.5mo 0.85cb 2.5ti 1.6al 0.009b, Consumable Electrode Melted, Solution
Heat Treated, Precipitation Hardenable
SAE
SAE AMS5396B
En Vigor
1995-05-01
ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 65Ni - 28Mo -
5.5Fe - 0.40V As Cast
SAE
SAE
SAE AMS5666G
En Vigor
2013-06-05
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Extrusions,
and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65 Cb (Nb) Annealed
SAE
SAE AMS3731/3A
En Vigor
2011-08-09
POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, Machinable
SAE
SAE
SAE AMS2647A
En Vigor
1995-11-01
FLUORESCENT PENETRANT INSPECTION Aircraft and Engine Component Maintenance
