AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS6438G
En Vigor
2016-08-08
Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum Melted
 
SAE

SAE AMS5900B
En Vigor
2013-08-12
Steel Bars, Forgings, and Tubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb - 1.0V (1.05 - 1.15C) Premium Aircraft Quality for Bearing Applications, Double Vacuum Melted
 
SAE

SAE AMS5791B
En Vigor
2004-02-10
Cobalt Alloy, Powder, Plasma Spray 56.5Co - 25.5Cr - 10.5Ni - 7.5W
 
SAE

SAE J495_200405
En Vigor
2004-05-12
Straight Pins (Solid)
 
SAE

SAE ARP674B
En Vigor
1998-01-01
GROOVE DESIGN, METAL O-RING GASKET
 
SAE

SAE J1701_201304
En Vigor
2013-04-15
Torque-Tension Tightening for Inch Series Fasteners
 
SAE

SAE ARP990
En Vigor
2002-12-16
Minimum Requirements for Air Cargo Pallet Nets
 
SAE

SAE J1962_199306
En Vigor
1993-06-01
DIAGNOSTIC CONNECTOR
 
SAE

SAE J1324_198411
En Vigor
1984-11-01
HEAT INSULATION MATERIALS TEST PROCEDURE
 
SAE

SAE J1237_200103
En Vigor
2001-03-12
Metric Thread Rolling Screws
 
SAE

SAE J645_199707
En Vigor
1997-07-01
AUTOMOTIVE TRANSMISSION TERMINOLOGY
 
SAE

SAE AS5381-2
En Vigor
1951-10-02
AS5381 Seal for Push Button
 
SAE

SAE J1339_201504
En Vigor
2015-04-09
Test Method for Measuring Performance of Engine Cooling Fans
 
SAE

SAE AMS6351B
En Vigor
1972-05-15
STEEL SHEET, STRIP, AND PLATE 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized
 
SAE

SAE J274_200410
En Vigor
2004-10-25
Rated Suspension Spring Capacity
 
SAE

SAE J483_199309
En Vigor
1993-09-01
CROWN (BLIND, ACORN) NUTS
 
SAE

SAE J2040_200203
En Vigor
2002-03-20
Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width
 
SAE

SAE AS7479E
En Vigor
2021-08-27
Bolts and Screws, Steel, UNS S66286 1650 °F Solution Heat Treated Precipitation Heat Treated Before Roll Threaded
 
SAE

SAE J1305_202208
En Vigor
2022-08-26
Two-Block Warning, Limit, and Damage Prevention Systems in Lifting Crane Service
 
SAE

SAE AMS4115H
En Vigor
2009-07-10
Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings Annealed 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0)