Normas SAE
Filtrar:
SAE
SAE AMS4924D
En Vigor
1995-05-01
TITANIUM ALLOY BARS, FORGINGS, AND RINGS 5Al - 2.5Sn, Extra Low
Interstitial Annealed
SAE
SAE AMS4028E
En Vigor
1984-01-01
ALUMINUM ALLOY SHEET AND PLATE 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-0) Annealed
SAE
SAE AMS4915L
En Vigor
2013-02-26
Titanium Alloy Sheet, Strip, and Plate 8Al - 1V - 1Mo Single Annealed
SAE
SAE AMS5737M
En Vigor
1995-05-01
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, and Tubing
15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode
Melted 1650 °F (899 °C) Solution and Precipitation Heat Treated
SAE
SAE AMS4118J
En Vigor
1994-01-01
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE 4.OCu -
0.70Mn - 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
SAE
SAE AMS5548H
En Vigor
1985-07-01
STEEL SHEET AND STRIP, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr -
4.5Ni - 2.9Mo - 0.10N 1850° - 1975°F (1010° - 1080°C) Annealed
SAE
SAE AMS4049G
En Vigor
1979-07-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 1.5Mg - 1.6Cu - 0.23Cr
(Alclad 7075; -T6 Sheet, -T651 Plate)
SAE
SAE AMS3779/2B
En Vigor
2016-07-12
Tape, Adhesive, Pressure-Sensitive Thermal Radiation Resistant, Aluminum
Coated Glass Cloth
SAE
SAE AMS5738A
En Vigor
1971-05-01
STEEL BARS, CORROSION RESISTANT 18Cr - 9Ni (SAE 30303F) Free Machining,
High Yield Strength
SAE
SAE
SAE
SAE AMS5517J
En Vigor
1992-07-01
STEEL, CORROSION RESISTANT, SHEET AND STRIP 18Cr - 8Ni (SAE 30301) Cold
Rolled, 125 ksi (862 MPa) Tensile Strength
SAE
SAE AMS4441E
En Vigor
2006-06-21
Magnesium Alloy Castings, Sand, 3.5Ce - 0.7Zr (EK41A-T6), Solution and
Precipitation Heat Treated
SAE
SAE AMS4970B
En Vigor
1969-11-01
TITANIUM BARS AND FORGINGS 7Al - 4Mo Solution and Precipitation Treated
SAE
SAE
SAE
SAE
SAE
SAE AMS5348A
En Vigor
1991-10-01
STEEL CASTINGS, TUBULAR, CENTRIFUGAL, CORROSION RESISTANT 15Cr - 4.6Ni -
0.22(Cb+Ta) - 2.8Cu Solution Heat Treated
SAE
