AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS2431/6D
En Vigor
2022-03-09
Peening Media Glass Shot
SAE

SAE AMS5121A
En Vigor
1947-07-01
Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed
SAE

SAE AMS5349D
En Vigor
2007-04-13
Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
SAE

SAE AMS4532B
En Vigor
1964-06-30
COPPER-BERYLLIUM ALLOY SHEET AND STRIP 98Cu - 1.9Be Half Hard
SAE

SAE AGS1522-5
En Vigor
1963-05-07
AGS1522 Sleeves, Insulating, Cable, L.T. Black and Red
SAE

SAE AMS4942G
En Vigor
2018-03-04
Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
SAE

SAE AIR1397B
En Vigor
2019-09-26
Clamp Material, Injection Molded
SAE

SAE AMS2816R
En Vigor
1984-10-01
IDENTIFICATION Welding Wire, Color Code System
SAE

SAE AMS3271A
En Vigor
1994-04-01
CLOTH, KNITTED NYLON STRETCH Polychloroprene Coated
SAE

SAE AMS5042A
En Vigor
1941-09-01
STEEL SHEET AND STRIP Low Carbon
SAE

SAE AMS4911M
En Vigor
2012-01-06
Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed
SAE

SAE AMS2816J
En Vigor
1973-06-01
IDENTIFICATION Welding Wire, Color Code System
SAE

SAE AMS4073
En Vigor
1981-07-01
Aluminum Alloy, Sheet and Plate, Alclad 4.5 Cu - 1.5 Mg - 0.60 Mn - (Alclad 2024-T86) Width Over 30 to 48 In., Incl.
SAE

SAE AMS5757A
En Vigor
1966-03-01
ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 10Co - 10Mo - 1Al - 2.5Ti Vacuum Melted, Solution and Precipitation Treated
SAE

SAE AMS4596A
En Vigor
2008-10-21
Copper Nickel Tin Alloy, Bars, Rods, and Tubes 77Cu – 15Ni – 8Sn Solution Annealed and Spinodal Hardened (TX 00)
SAE

SAE AMS3215B
En Vigor
1945-10-01
SYNTHETIC RUBBER Aromatic Fuel Resistant (65-75)
SAE

SAE AMS4634E
En Vigor
2025-02-25
Aluminum Bronze Bars, Rods, and Forgings, 90.5Cu - 7.5Al - 1.9Si, Stress Relieved
SAE

SAE AMS3618
En Vigor
1985-04-01
RESIN, POLYIMIDE, THERMOSETTING High Heat (290°C (554°F)) Resistant
SAE

SAE AMS5338E
En Vigor
2006-04-18
Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempered
SAE

SAE AMS5711G
En Vigor
2025-12-10
Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging, Rings and Heading, 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La (HASTELLOY® S), Consumable Electrode Remelted, Solution Heat Treated