AENOR Logo

Normas SAE

49622 Resultados disponibles

Filtrar:

(40736)
(8886)
SAE

SAE AS15005D
En Vigor
2017-08-21
FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V
 
SAE

SAE AMS6458E
En Vigor
1979-01-15
STEEL WIRE, WELDING 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted
 
SAE

SAE AMSA21180C
En Vigor
2017-06-13
Aluminum-Alloy Castings, High Strength
 
SAE

SAE AMS5631D
En Vigor
2000-09-01
Steel, Corrosion Resistant, Bars and Forgings 17Cr (0.60 - 0.75C) (SAE 51440A)
 
SAE

SAE AMS7246B
En Vigor
1993-10-01
Inserts, Thread Form, Corrosion and Heat Resistant Alloy 72ni 15.5cr 0.95(Cb + Ta) 2.5ti 0.70al 7.0fe
 
SAE

SAE ARP499C
En Vigor
2013-09-19
Passageway Door Operation
 
SAE

SAE AS20708/8B
En Vigor
2016-06-09
Synchro, Control Transmitter, Type 26V-11CX4C
 
SAE

SAE AS15766-3
En Vigor
1983-06-01
AS15766-769 Ferrule, Welding, Pipe Fitting - Assembly
 
SAE

SAE AMS7467A
En Vigor
1979-07-16
BOLTS AND SCREWS, NICKEL ALLOY, CORROSION AND HEAT RESISTANT Upset Headed, Roll Threaded, Stress-Rupture Resistant
 
SAE

SAE AS14101E
En Vigor
2018-05-14
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F
 
SAE

SAE AMS6529A
En Vigor
1996-06-01
STEEL, BARS 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized
 
SAE

SAE AS1711C
En Vigor
2024-06-26
COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS, ENVELOPE DIMENSIONS DESIGN STANDARD
 
SAE

SAE AS1007B
En Vigor
1981-01-15
UNION, REDUCER, BULKHEAD, FLARELESS TUBE
 
SAE

SAE AS129293
En Vigor
2012-11-01
STUD - STRAIGHT, DRILLED, .3125-18 X .3125-24
 
SAE

SAE AMS5911A
En Vigor
2006-04-20
Steel, Corrosion Resistant, Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
 
SAE

SAE AMS6936B
En Vigor
2015-07-16
Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn Annealed
 
SAE

SAE ARP823B
En Vigor
1982-07-01
MINIMIZING STRESS-CORROSION CRACKING IN WROUGHT HEAT-TREATABLE ALUMINUM ALLOY PRODUCTS
 
SAE

SAE AMS5775C
En Vigor
1994-04-01
WELDING ELECTRODES, COVERED, CORROSION AND HEAT RESISTANT STEEL 16.5Cr - 4.5Ni - 2.9Mo - 0.10N
 
SAE

SAE AMS6442C
En Vigor
1967-11-01
STEEL BARS AND FORGINGS 0.50Cr (0.98 - 1.10C) (SAE 50100) Bearing Quality
 
SAE

SAE AS21904D
En Vigor
2015-12-02
ELBOW, FLARELESS TUBE, 90°