AENOR Logo

Normas SAE

49877 Resultados disponibles

Filtrar:

(40986)
(8891)
SAE

SAE AMS4375N
En Vigor
2024-05-01
Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-O) Annealed and Recrystallized
SAE

SAE AMS5044L
En Vigor
2024-12-03
Steel, Sheet and Strip, 0.15 Carbon, Maximum (SAE 1010), Half Hard Temper
SAE

SAE AMS4910N
En Vigor
2008-02-15
Titanium Alloy, Sheet, Strip, and Plate 5Al - 2.5Sn Annealed
SAE

SAE AMS4420B
En Vigor
1942-12-01
MAGNESIUM ALLOY CASTINGS (Sand) 6 Al 3 Zn (As Cast)
SAE

SAE AMS5120J
En Vigor
1994-04-01
STEEL STRIP 0.68 - 0.80C (SAE 1074)
SAE

SAE AMS4800F
En Vigor
2018-04-19
Bearings, Babbitt 91Sn – 4.5Sb – 4.5Cu
SAE

SAE AMS5344D
En Vigor
2000-09-01
Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength
SAE

SAE AMS4771H
En Vigor
2009-06-11
Silver Alloy, Brazing Filler Metal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 °F (632 to 688 °C) Solidus-Liquidus Range
SAE

SAE AMS4071H
En Vigor
1979-01-01
ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND 2.5Mg - 0.25Cr (5052-0) UNS A95052
SAE

SAE AMS4991F
En Vigor
2018-04-28
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
SAE

SAE AMS4855G
En Vigor
2015-09-24
Leaded Red Brass, Sand and Centrifugal Castings 85Cu – 5.0Sn – 5.0Pb – 5.0Zn As Cast
SAE

SAE AMS4918N
En Vigor
2014-10-27
Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed
SAE

SAE AMS5044K
En Vigor
2019-05-10
Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper
SAE

SAE AMS4616B
En Vigor
1958-07-15
SILICON BRONZE 92Cu - 3.2Si - 2.8Zn - 1.5Fe
SAE

SAE AMS3906/7A
En Vigor
2011-08-09
GLASS NON-WOVEN FIBER TAPE AND FLAT SHEET Epoxy Resin Impregnated, For Hand and Machine Layup GL-III-33 - 95 (200)
SAE

SAE AMS3892/6A
En Vigor
2005-05-31
Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE

SAE AMS5364A
En Vigor
2011-08-10
STEEL CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 19.5Cr - 10.5Ni - 0.65(Cb+Ta) Solution Heat Treated
SAE

SAE AMS4077E
En Vigor
1995-05-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-0) Annealed
SAE

SAE AMS4946C
En Vigor
2010-08-18
Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved
SAE

SAE AMS4873D
En Vigor
1995-05-01
ALUMINUM BRONZE CASTINGS, SAND 85Cu - 11Al - 3.6Fe Solution Heat Treated and Tempered