AENOR Logo

Normas SAE

49675 Resultados disponibles

Filtrar:

(40785)
(8890)
SAE

SAE AMS2431/1A
En Vigor
1996-09-01
PEENING MEDIA (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)
 
SAE

SAE AMS4701H
En Vigor
2015-08-08
Copper Wire, Oxygen-Free 99.95(Cu+Ag) Annealed
 
SAE

SAE AMS3327D
En Vigor
2009-05-28
Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80
 
SAE

SAE AMS4046G
En Vigor
2017-06-15
Aluminum Alloy Sheet and Plate, Alclad One Side 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad One Side 7075; -T6 Sheet -T651 Plate) Solution and Precipitation Heat Treated
 
SAE

SAE AMS5786D
En Vigor
2000-09-01
Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe
 
SAE

SAE AMS4048H
En Vigor
1994-04-01
ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6Zn - 2.5Mg - 1.6Cu - 0-23Cr (Alclad 7075-0) Annealed
 
SAE

SAE AMS3580D
En Vigor
1995-10-01
Cast Rods, Tubes and Shapes, Methyl Methacrylate Plastic
 
SAE

SAE AMS4098
En Vigor
2002-12-16
Aluminum Alloy, Sheet and Plate 4.5 Cu - 1.5 Mg - 0.60 Mn (2024-T36) Width Over 48 to 60 In., Incl.
 
SAE

SAE AIR853
En Vigor
1994-09-01
DISCONNECT SYSTEMS, ACCESSORY DRIVE SHAFT
 
SAE

SAE AMS4880C
En Vigor
1995-09-01
ALUMINUM BRONZE ALLOY, CENTRIFUGAL AND CONTINUOUS-CAST CASTINGS 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and Temper Annealed
 
SAE

SAE AMS3358C
En Vigor
2012-01-17
Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa·s) Viscosity
 
SAE

SAE AMS5756B
En Vigor
1977-07-01
ALLOY BARS, FORGINGS, AND RINGS, CORROSION AND HEAT RESISTANT 54Ni - 19Cr - 10Co - 10Mo - 2.6Ti - 1.0Al - 0.006B Vacuum Melted, Solution Treated
 
SAE

SAE AMS3275B
En Vigor
1999-03-01
Sheet, Acrylonitrile Butadiene (NBR) Rubber and Non-asbestos Fiber Fuel and Oil Resistant
 
SAE

SAE AMS4650K
En Vigor
1996-09-01
COPPER-BERYLLIUM ALLOY, BARS, RODS, SHAPES, AND FORGINGS 98Cu - 1.9Be Solution Heat Treated TB00 (A)
 
SAE

SAE AMS4991C
En Vigor
2002-06-14
Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
 
SAE

SAE AMS2665F
En Vigor
1996-02-01
BRAZING, SILVER FOR USE UP TO 400 °F (204 °C)
 
SAE

SAE AMS5523A
En Vigor
1971-11-01
STEEL SHEET, STRIP, AND PLATE, CORROSION AND HEAT RESISTANT 23Cr - 13.5Ni (309S)
 
SAE

SAE AMS5579C
En Vigor
2000-11-01
Steel, Corrosion and Heat Resistant, Tubing Welded 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb + Ta) - 0.22Ti Thin Wall
 
SAE

SAE AMS3829B
En Vigor
1998-09-01
Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated
 
SAE

SAE AMS5510E
En Vigor
1952-02-01
STEEL SHEET AND STRIP, CORROSION AND HEAT RESISTANT 18Cr - 10Ni - Ti (SAE 30321)